MCP server & Agent Skill for STM32CubeMX 6.x (HAL1). Discover MCU configuration options, parameters and constraints, and compile declarative JSON into .ioc projects offline.
Enables AI agents to control serial port devices (modems, instruments, embedded boards) via MCP tools for listing ports, connecting, and sending/receiving commands.
Check 22,000+ devices with open firmware or open protocols (OpenWrt, LineageOS, coreboot, Zigbee2MQTT, Tasmota…) before reverse engineering one; claim a device while you work on it and publish your findings when done.
MCP server providing embedded engineering calculators and code generators as tools for AI agents, enabling precise, deterministic embedded math and C code generation.
Exposes CAN bus debugging as MCP tools so AI agents can send, receive, monitor, and periodically transmit frames on real hardware without touching vendor GUI software. Structured JSON output and a shared CLI core let agents run end-to-end bus bring-up, diagnosis, and validation, with ZLG USBCAN-2E-U verified and other adapters registrable.
An MCP server for Nordic nRF Connect SDK development that enables users to list, read, and search documentation and sample code from the nrfconnect/sdk-nrf repository. It provides Claude with specialized tools to navigate SDK resources, source files, and configuration examples directly through the GitHub API.
Standalone TypeScript MCP server for micrOS devices. Enables discovering devices, inspecting device cache, running micrOS commands, and discovering each device's available module commands.
Enables AI agents to compile, flash, erase, and read serial output from embedded development boards, with guardrails such as budget limits, serial port mutexes, and mandatory human confirmation for destructive operations.
Enables LLMs to communicate with hardware devices via serial ports. Provides tools for listing ports, opening/closing connections, reading/writing data, and controlling serial signals.
This MCP server acts as a local stdio proxy for whatic.io's remote IC-discovery server, enabling MCP clients to search electronic components and retrieve part specs, comparisons, and images.
Enables MCP-compatible AI clients to operate a RIGOL MHO98 oscilloscope over USB, including configuration, waveform and measurement acquisition, FFT analysis, and protocol decoding.
Enables controlling a Dirtywave M8 over USB by reading its screen as text, pressing buttons, playing notes, and retrieving system information through MCP tools.
Agentic Hardware-in-the-Loop (Agentic HIL) lets coding agents develop firmware on real embedded boards: flash, reset, read UART and exchange CAN traffic, diagnose and fix. Local, policy-gated MCP tools support OpenOCD, pyOCD and STM32CubeProgrammer, with pytest for CI.
Enables AI assistants to access structured PLC brand, IEC 61131-3 language, and code-template knowledge so they can generate IDE-specific automation code from natural-language requests.
Enables MCP clients to discover connected gadgets, read their state and events, and route commands to them over versioned device contracts on local USB and TCP transports. Ships with a configurable software simulator so device interactions can be exercised without physical hardware.
Enables Claude to create, update, and manage LED patterns on a PixelBlaze controller, including setting brightness and reading device info, through a set of tools that interact with the device's API.
Enables AI agents to search a catalog of MCP servers for physical hardware such as ESP32, Arduino, Raspberry Pi, 3D printers, Home Assistant devices, cameras, Zigbee and lab gear, returning install commands and ready-to-paste client configs. It also supports browsing device families and getting ranked recommendations for a specific device or model.
Enables AI coding assistants to inspect a configured QNX compiler and compile workspace C sources for QNX x86_64 with fixed arguments, returning operation IDs for status polling and cancellation.
Enables Android Automotive developers to explore and implement Vehicle Hardware Abstraction Layer (vHAL) properties with intelligent tools for property analysis, source code lookup, implementation guidance, and automated code generation for automotive systems like climate control and seat management.
Enables AI assistants to flash firmware, program memory, modify option bytes, erase chips, reset boards, and capture SWO printf traces for STM32 microcontrollers via STM32CubeCLT.
AI-driven USB oscilloscope control via FastMCP, enabling waveform capture, CSV export, and frequency measurements on PicoScope, Hantek, or a built-in simulator.
An MCP server that lets AI agents control an RS PRO RS-3005P/RS-6005P programmable DC power supply over USB/RS232, enabling voltage/current control, measurements, output switching, and memory operations.
Enables AI agents to control an ESP32 board's relays, GPIO pins and analog sensors over a small HTTP API on the local network, with no cloud service in the middle.
Enables AI agents to control and display real-time notifications, telemetry, and custom apps on Ulanzi TC001 and compatible pixel clocks running Awtrix Light, including device management and declarative YAML-based metric polling.
Enables AI assistants to operate a Fishball7020/PlutoSky software-defined radio, including tuning, spectrum analysis, band scanning, IQ capture, FPGA filtering, and optional transmission.
Enables AI coding assistants to perform complete headless STM32 embedded firmware development, including project creation, pin configuration, code generation, building, and flashing, by driving the official STM32 command-line toolchain.
Enables LLMs to control RIGOL oscilloscopes over SCPI via LAN or USB, including configuring channels/timebase/trigger, taking measurements, capturing waveforms and screenshots, decoding serial protocols, running FFT analysis, and controlling the built-in AFG.
MCP server for controlling CNC machines via Universal GCode Sender.
Lets Claude (or any MCP-compatible AI assistant) connect to a CNC machine, inspect G-code, and issue motion commands — all through the UGS Pendant REST API.
MCP server enabling AI agents to search FTC SDK samples, scaffold OpModes, build and deploy TeamCode to REV Control Hub, and read robot logs for a full code-robot-debug loop.
A local-first, read-only MCP server for vehicle diagnostics that exposes structured OBD-II tools for reading PIDs, DTCs, and ECU snapshots without raw protocol access.
An MCP server that enables AI assistants to control Siglent SDS oscilloscopes over a local network using SCPI commands. It allows users to measure signals, configure channel and acquisition settings, and capture waveforms or screenshots through natural language.
Enables AI tools to perform full-featured embedded microcontroller debugging via pyOCD and CMSIS-DAP probes, including probe management, flashing, breakpoints, register/memory access, fault analysis, and RTT communication.
Enables offline compilation of target JSON into STM32CubeMX .ioc files, importing/checking/generating IOC configurations, querying local CubeMX databases for devices, peripherals, pins, boards, and clocks, and exposing session state and protocol resources over stdio MCP.
Enables AI assistants to build and simulate Tinkercad Circuits through a real Chrome session, including placing parts, wiring pins, writing Arduino code, running simulations, and reading serial output.
Enables AI coding agents to run a SystemVerilog LSP for linting, formatting, navigation, rename, RTL hierarchy inspection, and automated RTL code actions on real projects.
A Model Context Protocol (MCP) server for ROS 2 that enables GitHub Copilot and other AI agents to interact with ROS 2 systems. This server provides tools for monitoring, debugging, and managing ROS 2 nodes, topics, services, and TF2 frames.
A stateful Bluetooth Low Energy (BLE) MCP server that enables AI agents to scan, connect, read/write characteristics, and subscribe to notifications on BLE devices.
Enables agents to discover and manage Raspberry Pis and other SSH devices on a LAN, including authentication, command execution, file and directory operations, reboots, and ctrlPi API installation.
A read-only MCP server for AI agents to understand KiCad projects through progressive disclosure, providing compact summaries and drill-down tools for components, nets, traces, and ERC/DRC checks without blowing context budgets.
MCP server for debugging STM32 microcontrollers over ST-LINK using STM32CubeCLT tools (GDB, ST-LINK_gdbserver, STM32_Programmer_CLI) with session management, flashing, breakpoints, memory/register access, and expression evaluation.
A Model Context Protocol (MCP) server that exposes lnav log file analysis capabilities to AI assistants, specifically optimized for Kvaser Plain Text Log Frame CAN bus log processing.
Enables AI assistants to communicate with serial port devices, supporting port management, data transmission in text/binary modes, interactive terminal sessions, and automatic reconnection.
Enables LLMs to control a Nordic Power Profiler Kit II over USB serial for current capture (500 nA–2000 mA at 100 kSa/s plus 8 logic channels) and DUT power sourcing (0.8–5 V), with samples written to npz files. Also supports offline analysis such as statistics, activity/duty-cycle segmentation, and battery-life estimation.
An MCP server that enables AI agents to read serial output from devices by buffering lines in the background and allowing polling for new output, preventing blocking on long-running serial monitors.
Stateful MCP server for driving debug probes (J-Link) to flash, debug, and inspect embedded targets. Enables AI agents to perform flash, memory, breakpoint, and ELF/SVD-aware operations conversationally.
MCP server that lets AI assistants control Siglent SDG waveform generators over a local network using natural language, supporting signal generation, modulation, sweep, burst, and arbitrary waveforms.
Enables MCP-capable agents to drive a real FPGA toolchain end to end—simulating, asserting, synthesizing, scanning JTAG, capturing on-chip waveforms, and configuring real silicon behind confirmation gates.
Exposes ISO 14229 Unified Diagnostic Services as MCP tools, letting any MCP client run session control, DID reads and writes, DTC queries, routine control, security access and raw requests against a real ECU on a CAN bus or against a built-in simulator. A claim/release access model lets multiple clients safely share one device under test, with hardware-free simulation for offline test-plan development.