The Grate Guys Tools
Server Details
Planning calculators for metal grating, drainage covers and fabrication.
- Status
- Healthy
- Uptime
- 100.0% over the last 24 hours
- Last Tested
- Transport
- Streamable HTTP · MCP 2025-11-25
- URL
- ChatGPT
- –
- Claude
- –
TDQS
Score is being calculated.
Available Tools
15 toolsaccessible_grating_opening_checkerRead-onlyInspect
Checks the clear opening between bearing bars against the Ontario Building Code 13 mm limit for barrier-free paths of travel, and the widest bar spacing that would pass.
Inputs: pattern, spacing_in, bar_thickness_in.
aluminum_stainless_bar_grating_load_calculatorRead-onlyInspect
Safe load, deflection and the lightest bearing bar for aluminum 6063-T6 and stainless 304, 316, 304L and 316L bar grating at 1-3/16 in bar centres.
Inputs: load, value, span_in, span_mm, +2 more.
bar_grating_load_calculatorRead-onlyInspect
Finds the lightest welded steel bearing bar (19-W-4 or 15-W-4, smooth or serrated) that carries a clear span and load within a deflection limit.
Inputs: load, value, pattern, span_ft, +5 more.
bar_grating_load_tablesRead-onlyInspect
Looks up the safe uniform load (U), safe concentrated load (C), deflections and weight for welded steel bar grating by bearing bar size and span.
Inputs: bar, pattern, span_ft, surface.
bollard_spacing_and_footing_calculatorRead-onlyInspect
Counts the bollards for a frontage and clear gap, checks the gap against vehicle and wheelchair guidance, gives typical footing and concrete for a standard (not crash rated) steel pipe bollard, and explains crash ratings.
Inputs: ends, pipe, rating, height_in, +6 more.
catch_basin_grate_and_frame_size_finderRead-onlyInspect
Names the Ontario Provincial Standard Drawing for a catch basin inlet type, checks the grate bearing on the frame ledge against the NAAMM minimum, gives the range of bearing bar lengths that sit on the ledge, and lists the EN 1433 load class for the traffic.
Inputs: inlet, seat_mm, span_in, span_mm, +2 more.
fence_and_gate_post_spacing_and_weightRead-onlyInspect
Post count and spacing for a chain link or ornamental steel fence run, chain link footing depth and gate post size, and the weight and hinge loads of an ornamental steel gate leaf.
Inputs: panel, gap_in, leaves, run_ft, +8 more.
galvanizing_coating_thickness_calculatorRead-onlyInspect
Minimum average hot-dip galvanized coating grade by steel category and thickness, in mils, microns and ounces of zinc per square foot, with total zinc for a surface area.
Inputs: category, area_sqft, thickness_in, thickness_mm.
guard_and_railing_code_checker_ontarioRead-onlyInspect
Whether a guard is required, its minimum height, opening limit, climbing rule and design loads under the Ontario Building Code Part 9 and Part 3 for a described situation.
Inputs: use, drop, unit, opening, +7 more.
loading_dock_height_and_leveler_checkRead-onlyInspect
The grade a dock leveler works at between the lowest and highest truck bed you serve, against the 10% (electric) and 15% (gas or diesel) limits, the shortest standard leveler length that fits, and whether two makers published working ranges cover it.
Inputs: equipment, bed_low_in, leveler_ft, bed_high_in, +1 more.
steel_beam_lintel_span_checkRead-onlyInspect
The steel angle lintel or steel beam that the 2024 Ontario Building Code Part 9 tables list for an opening width in a brick or stone veneer wall or a masonry wall, with the 150 mm bearing rule. Not a stamped design.
Inputs: wall, member, bearing_mm, opening_ft, +1 more.
steel_stair_calculator_ontarioRead-onlyInspect
Allowed riser counts, riser height, tread run, flights, width, headroom and handrail height for a total rise under Ontario Building Code Part 9.
Inputs: run, unit, width, handrail, +4 more.
steel_weight_calculatorRead-onlyInspect
Theoretical weight of carbon steel plate, flat bar, round bar, square bar, angle, square or rectangular tube and round pipe, in pounds and kilograms.
Inputs: side, unit, wall, leg_a, +9 more.
trench_drain_flow_capacity_calculatorRead-onlyInspect
The flow a trench drain has to handle from a paved area (rational method with Toronto City rainfall rates from Environment and Climate Change Canada) and the flow the channel carries (Manning), with the narrowest channel that works.
Inputs: c, lining, period, area_m2, +6 more.
trench_drain_grate_load_classRead-onlyInspect
The EN 1433 load class, A 15 to F 900, and its test load in kN for where a trench drain goes and what drives or rolls over it.
Inputs: application.
Tool Schema Changelog
Recent tool additions, removals, and schema changes observed during successful MCP inspections.
Loading tool schema changelog…
Related MCP Connectors
Planning calculators for structural framing and building projects.
1Planning calculators for custom homes, additions and major renovations.
1Planning tools for commercial and industrial construction.
1
Related MCP Servers
- AlicenseNot gradedqualityCmaintenancePlan optimal container & truck loads: 3D layouts, right-size the container mix, and check utilization, centre of gravity, crush protection and securing across 200+ equipment types.8 npm2MIT

gemsmakers-mcp-serverofficial
AlicenseAqualityCmaintenanceConnects AI agents to over 2,700 interactive precision scientific, engineering, horological, and bullion calculators, returning verified formulas and step-by-step mathematical proofs without login or API keys.5412 npmMIT- AlicenseNot gradedqualityCmaintenanceEnables recalculating interest, monetary correction, penalties and attorney fees on bank contracts, financing and judicial debts using official BACEN/IBGE indices (IPCA, INPC, IGP-M, SELIC, TR) fetched live. Also covers labor, alimony, FGTS, INSS, pension, partition and criminal sentencing calculations through 16 deterministic tools, with no login or API key required.MIT
- FlicenseNot gradedqualityBmaintenanceEnables AI agents to run free, read-only calculators built on official government rules across Ireland, the UK, Canada, Québec, Australia and New Zealand, covering taxes, welfare benefits, pensions, property transaction taxes, parental leave and savings. Every result links the public calculator page and the official sources it relies on, so agents can cite them.-
Glama MCP Gateway
Add one secure layer between your agents and this server.