Timberr Framing Tools
Server Details
Planning calculators for structural framing and building projects.
- Status
- Healthy
- Uptime
- 100.0% over the last 24 hours
- Last Tested
- Transport
- Streamable HTTP · MCP 2025-11-25
- URL
- ChatGPT
- –
- Claude
- –
TDQS
Score is being calculated.
Available Tools
14 toolsdeck_joist_and_beam_span_calculatorDeck Joist and Beam Span CalculatorRead-onlyInspect
Maximum deck joist span from Table 9.23.4.2.-A, the smallest built-up lumber beam from Table 9.23.4.2.-H for your post spacing, and the minimum post size from Article 9.17.4.1. of the 2024 Ontario Building Code. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Tables 9.23.4.2.-A and 9.23.4.2.-H, Articles 9.4.2.3., 9.4.2.2., 9.17.1.1. and 9.17.4.1., and SB-1 Table 2.
Inputs: span_ft (required), post_spacing_ft (required), city, size, +10 more.
firewall_and_party_wall_fire_rating_checkerFirewall and Party Wall Fire Rating CheckerRead-onlyInspect
Fire-resistance rating and sound rating the 2024 Ontario Building Code Part 9 requires for a wall between dwelling units: a party wall on a property line (townhouse, semi-detached), a wall between suites in one building, a house with a secondary suite, or a garage wall. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Articles 9.10.8.1., 9.10.9.15., 9.10.9.16., 9.10.9.18., 9.10.11.1. to 9.10.11.4., 9.11.1.1. and 9.11.1.3., and Article 3.1.10.2. to 3.1.10.5.
Inputs: wall_use, sprinklered, two_storey_unit, unit_above_unit, +1 more.
floor_joist_span_calculatorFloor Joist Span CalculatorRead-onlyInspect
Maximum floor joist span for dimension lumber from Table 9.23.4.2.-A of the 2024 Ontario Building Code, and whether your clear span is within it. Source: Ontario Building Code 2024, Division B, Table 9.23.4.2.-A, Maximum Spans for Floor Joists, General Cases.
Inputs: span_ft (required), size, grade, span_m, +4 more.
lintel_size_lookupLintel and Header Size LookupRead-onlyInspect
Smallest sawn lumber lintel over a door or window opening in a loadbearing wall, from Tables 9.23.12.3.-A to C of the 2024 Ontario Building Code. Source: Ontario Building Code 2024, Division B, Tables 9.23.12.3.-A to 9.23.12.3.-C, Maximum Spans for Lintels (No. 1 or No. 2 grade lumber).
Inputs: opening_ft (required), wall, species, snow_kpa, +4 more.
load_bearing_wall_removal_beam_sizer_guideLoad-Bearing Wall Removal Beam GuideRead-onlyInspect
Checks whether removing a load-bearing wall can stay inside the Ontario Building Code Part 9 beam tables, flags when an engineer is needed, and lists the published beam size ranges from Tables 9.23.4.2.-H to -L and 9.23.4.3.-A to -J. It is not a design. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Tables 9.23.4.2.-H to -L, 9.23.4.3. and 9.23.4.3.-A to -J, Articles 9.4.1.1. and 9.23.4.1., Note A-9.23.4.2.; Building Code Act, 1992, ss. 1(1) and 8(1).
Inputs: opening_ft (required), city, wall, sr_kpa, +9 more.
lumber_board_foot_calculatorLumber Takeoff and Board Foot CalculatorRead-onlyInspect
Board feet, linear feet and piece counts for a list of dimension lumber sizes, lengths and quantities, with a waste allowance. Source: Board foot arithmetic on nominal size: thickness in x width in x length ft / 12; no code table involved.
Inputs: lines (required), waste_pct.
nailing_schedule_lookupFraming Nailing Schedule LookupRead-onlyInspect
Minimum nail length and number or spacing of nails for framing connections, from Table 9.23.3.4. of the 2024 Ontario Building Code. Filter by part of the frame and search words. Source: Ontario Building Code 2024, Division B, Table 9.23.3.4., Nailing for Framing.
Inputs: q, group.
post_and_footing_size_calculatorPost and Footing Size CalculatorRead-onlyInspect
Minimum footing area and thickness for a post or column from Table 9.15.3.4. (house) or from the 2.4 kPa deck load over 75 kPa soil, the minimum post size from Article 9.17.4.1., and the minimum foundation depth from Table 9.12.2.2. of the 2024 Ontario Building Code. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Articles 9.15.1.1., 9.15.3.3. to 9.15.3.8., 9.4.2.3., 9.4.4.1. (Table 9.4.4.1.), 9.12.2.2. (Table 9.12.2.2.) and 9.17.1.1. to 9.17.4.1.
Inputs: kind, soil, floors, heated, +9 more.
roof_pitch_rafter_length_calculatorRoof Pitch and Rafter Length CalculatorRead-onlyInspect
Common rafter length, roof angle, slope factor and plumb cut from the roof pitch, building span, overhang and ridge board thickness. Source: Roof geometry (Pythagorean slope factor); no code table involved.
Inputs: pitch (required), span_ft (required), span_in, ridge_in, +1 more.
roof_rafter_span_calculatorRoof Rafter Span CalculatorRead-onlyInspect
Maximum horizontal span of a wood roof rafter from Table 9.23.4.2.-F of the 2024 Ontario Building Code for specified roof snow loads of 1.0 to 2.0 kPa. Source: Ontario Building Code 2024, Division B, Table 9.23.4.2.-F, Maximum Spans for Roof Rafters, Specified Roof Snow Loads 1.0 to 2.0 kPa.
Inputs: span_ft (required), size, grade, span_m, +4 more.
sheathing_sheet_calculatorSheathing and Subfloor Sheet CalculatorRead-onlyInspect
Sheets of plywood or OSB needed to cover a floor, wall or sloped roof from its size, roof pitch, openings and waste allowance. Source: Area arithmetic (slope factor for roofs); no code table involved.
Inputs: width_ft (required), length_ft (required), pitch, sheet, +3 more.
stair_stringer_calculatorStair Stringer CalculatorRead-onlyInspect
Riser count and height, treads, total run and stringer length for a straight private stair, checked against Table 9.8.4.1. of the 2024 Ontario Building Code. Source: Ontario Building Code 2024, Division B, Part 9, Table 9.8.4.1. and Articles 9.8.3.3. and 9.8.4.2.
Inputs: run_mm, rise_ft, rise_in, rise_mm, +2 more.
truss_vs_rafter_span_checkerTruss vs Rafter Span CheckerRead-onlyInspect
Reads the specified roof snow load for an Ontario city from SB-1 and Article 9.4.2.2., then checks whether a site-built rafter in Tables 9.23.4.2.-F and -G of the 2024 Ontario Building Code can span your roof or whether roof trusses are needed. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Tables 9.23.4.2.-F and 9.23.4.2.-G, Articles 9.4.2.1., 9.4.2.2. and 9.23.14.11.; SB-1 Table 2 (Ss and Sr).
Inputs: span_ft (required), city, grade, pitch, +7 more.
wall_framing_calculatorWall Framing CalculatorRead-onlyInspect
Studs, plate length and plate boards for a framed wall from its length, height, stud spacing, openings, corners and intersections. Source: Timberr Framing counting rules (field studs, king and jack studs, cripples, corners, intersections, plates); headers are not sized.
Inputs: length_ft (required), corners, length_m, openings, +6 more.
Tool Schema Changelog
Recent tool additions, removals, and schema changes observed during successful MCP inspections.
Loading tool schema changelog…
Related MCP Connectors
Planning calculators for custom homes, additions and major renovations.
1Planning calculators for metal grating, drainage covers and fabrication.
1Planning tools for commercial and industrial construction.
1UK building calculators, estimate comparisons and account-scoped quoting and job costs.
Related MCP Servers
- AlicenseNot gradedqualityCmaintenanceRead-only US construction calculators for AI assistants: roof pitch, hip roofs, concrete, gravel, brick, mortar, paint, drywall, deck boards, markup and hourly rate. Runs locally over stdio with no network calls.MIT
- FlicenseBqualityDmaintenanceUltra-lightweight MCP server for construction calculations and material estimation, enabling material calculator and cost estimator tools for structures like foundations, walls, slabs, and beams.42-
- FlicenseNot gradedqualityDmaintenanceProvides access to residential building codes (NEC, IRC, IPC), material specifications with pricing, and project calculators for DIY construction projects. Enables code compliance checking, material search across suppliers, and automated quantity calculations for electrical, plumbing, and construction materials.1-
- FlicenseNot gradedqualityBmaintenanceRuns 15 construction takeoff calculators — concrete, rebar, gravel, fill dirt, sand, topsoil, asphalt, lumber, roofing, fence, duct and paver base — directly from an MCP client, alongside a tool that lists them and a searchable table of source-cited estimating constants. Each call is computed by the bundled TakeoffMetric engine and returns structured quantities, order amounts, costs, warnings and assumptions.73 npm-
Glama MCP Gateway
Add one secure layer between your agents and this server.