Skip to main content
Glama

The Grate Guys Tools

fence_and_gate_post_spacing_and_weight

Read-only

Post count and spacing for a chain link or ornamental steel fence run, chain link footing depth and gate post size, and the weight and hinge loads of an ornamental steel gate leaf.

Tool call template

This tool declares no required parameters. Add optional parameters from the input schema as needed.

{
  "id": 1,
  "jsonrpc": "2.0",
  "method": "tools/call",
  "params": {
    "arguments": {},
    "name": "fence_and_gate_post_spacing_and_weight"
  }
}

Input Schema

NameRequiredDescriptionDefault
panelNochain-link (line posts 10 ft apart at most) or ornamental steel tubular pickets (8 ft, 96 in on center).ornamental
gap_inNoOrnamental gate: largest gap between pickets in inches (4 in is the most the maker chart allows).
leavesNoSingle or double leaf gate.
run_ftNoLength of the fence run in feet, not counting the gate (3 to 2,000).
gate_ftNoGate opening in feet, 0 for no gate (0 to 24). The gate sits at the end of the run.
tube_inNoOrnamental gate frame: square tube outside size in inches.
wall_inNoOrnamental gate frame: tube wall in inches (0.12 is about 11 gauge).
height_ftNoFence and gate height in feet (3 to 12).
mid_railsNoOrnamental gate: rails between the top and bottom rail.
picket_inNoOrnamental gate: square picket size in inches.
post_od_inNoChain link line post outside diameter in inches, to get the footing diameter.
hinge_spacing_inNoDistance between the two hinges in inches. Default: gate height less 24 in.

Schema Changelog

Changes observed during successful MCP inspections.

  1. First observed

TDQS

Score is being calculated.

Try in Browser

Glama MCP Gateway

Add one secure layer between your agents and this server.

Resources