Skip to main content
Glama
62,133 servers. Last updated

Matching MCP tools:

Matching MCP Connectors:

"A management control platform (MCP) compatible with the Cypress framework" matching MCP servers:

  • Robotics Control MCP Server

    CSOAI-ORG
    A
    license
    -
    quality
    A
    maintenance
    Enables AI agents to control hardware devices like Arduino, Raspberry Pi, 3D printers, CNC machines, and custom robots via serial ports and HTTP. Provides tools for device discovery, command sending, sensor reading, servo control, G-code execution, and emergency stops with safety features.
    Last updated
    MIT

  • CNCjs MCP Server

    brs077
    A
    license
    A
    quality
    D
    maintenance
    Bridges Claude Code to CNCjs to enable remote control and monitoring of GRBL-based CNC machines. It provides a comprehensive toolset for managing G-code jobs, machine movement, and safety operations through natural language.
    Last updated
    30
    MIT

  • siglent-mcp

    DVSProductions
    A
    license
    -
    quality
    C
    maintenance
    Control a Siglent SPD1305X (or SPD1000X series) programmable DC power supply from Claude Code over Ethernet using SCPI commands, with safety limits and monitoring tools.
    Last updated
    MIT

  • vivado-mcp

    mapleleavessssssss-wq
    A
    license
    -
    quality
    A
    maintenance
    A minimal MCP server that provides 25 tools and 5 hooks to control Xilinx Vivado EDA for FPGA development, including session management, Tcl execution, smart diagnostics, and IP debugging.
    Last updated
    76
    Apache 2.0

  • PPK2 MCP Server

    zhixuan2333
    F
    license
    A
    quality
    C
    maintenance
    Enables MCP clients to control a Nordic PPK2 for power profiling: configure source/measurement modes, set voltage, power DUT, measure current/power/energy, and capture logic channels.
    Last updated
    6

  • MHS-5200A MCP Server

    NaoNaoMe
    A
    license
    A
    quality
    C
    maintenance
    Enables control of MHS-5200A series signal generators via serial connection, including frequency, amplitude, waveform, and sweep settings.
    Last updated
    16
    MIT

  • siglent-sds-mcp

    MagnusJohansson
    A
    license
    A
    quality
    D
    maintenance
    An MCP server that enables AI assistants to control Siglent SDS oscilloscopes over a local network using SCPI commands. It allows users to measure signals, configure channel and acquisition settings, and capture waveforms or screenshots through natural language.
    Last updated
    13
    2
    3
    MIT

  • rs3005p-mcp

    Gigaclank
    A
    license
    A
    quality
    C
    maintenance
    An MCP server that lets AI agents control an RS PRO RS-3005P/RS-6005P programmable DC power supply over USB/RS232, enabling voltage/current control, measurements, output switching, and memory operations.
    Last updated
    14
    MIT

  • Sigmatek LASAL MCP Server

    Svel26
    F
    license
    A
    quality
    B
    maintenance
    Automates the Sigmatek LASAL software suite for PLC and HMI engineering, enabling AI assistants to inspect projects, apply structural changes, compile, download to hardware, and control PLC runtime.
    Last updated
    21

  • io.github.microhenrio/openocd

    microhenrio
    A
    license
    A
    quality
    B
    maintenance
    Debug microcontrollers directly from Claude. This is an MCP server that drives OpenOCD, letting Claude flash firmware, control execution, and inspect a running target — and read your variables and peripheral registers by name instead of raw addresses.
    Last updated
    39
    4
    MIT

  • te1000-mcp

    Edge-JB
    A
    license
    A
    quality
    A
    maintenance
    MCP server for Beckhoff TwinCAT XAE / TE1000 Automation Interface, enabling control of XAE Shell, TwinCAT tree manipulation, PLC operations, and build actions via natural language.
    Last updated
    25
    5
    MIT

  • UGS-MCP

    zackpeters93
    A
    license
    A
    quality
    B
    maintenance
    MCP server for controlling CNC machines via Universal GCode Sender. Lets Claude (or any MCP-compatible AI assistant) connect to a CNC machine, inspect G-code, and issue motion commands — all through the UGS Pendant REST API.
    Last updated
    19
    3
    MIT

  • mcp-snap7

    daedalus
    A
    license
    B
    quality
    C
    maintenance
    Enables MCP clients to connect to and interact with Siemens PLCs via python-snap7, supporting read/write operations on data blocks, memory, timers, counters, and CPU management.
    Last updated
    22
    MIT