hem
Folds sheet metal edges back on themselves into closed, open, or teardrop profiles, letting you set gap, angle, radius, or folded-leg length and return added volume.
Instructions
Fold a sheet metal edge back on itself (a hem), inside the old edge: closed, open (with a gap) or teardrop (angle, default 200 degrees; radius, default the part's). length is the folded-back leg of a closed or open hem (a teardrop has none). Returns the volume added. Refused while flattened.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"edge": "<edge>",
"type": "<type>"
},
"name": "hem"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| gap | No | Gap of an open hem (default 1 mm) | |
| edge | Yes | A point on the edge (within 0.5 mm) | |
| type | Yes | Kind of hem | |
| unit | No | mm, cm, m, inch or ft | |
| angle | No | Teardrop only: roll angle in degrees, 181-225 (default 200) | |
| length | No | Length of the folded-back leg | |
| radius | No | Teardrop only: radius (default: the part's bend radius) |