Skip to main content
Glama
72,476 servers. Updated

Matching MCP tools:

Matching MCP Connectors:

"Ways to Control or Operate a Computer" matching MCP servers:

  • Robotics Control MCP Server

    CSOAI-ORG
    A
    license
    -
    quality
    A
    maintenance
    Enables AI agents to control hardware devices like Arduino, Raspberry Pi, 3D printers, CNC machines, and custom robots via serial ports and HTTP. Provides tools for device discovery, command sending, sensor reading, servo control, G-code execution, and emergency stops with safety features.
    MIT

  • CNCjs MCP Server

    brs077
    A
    license
    A
    quality
    D
    maintenance
    Bridges Claude Code to CNCjs to enable remote control and monitoring of GRBL-based CNC machines. It provides a comprehensive toolset for managing G-code jobs, machine movement, and safety operations through natural language.
    30
    MIT

  • siglent-mcp

    DVSProductions
    A
    license
    -
    quality
    C
    maintenance
    Control a Siglent SPD1305X (or SPD1000X series) programmable DC power supply from Claude Code over Ethernet using SCPI commands, with safety limits and monitoring tools.
    MIT

  • oscilloscope-mcp

    sandraschi
    A
    license
    -
    quality
    B
    maintenance
    AI-driven USB oscilloscope control via FastMCP, enabling waveform capture, CSV export, and frequency measurements on PicoScope, Hantek, or a built-in simulator.
    2
    MIT

  • mcp-serial-bridge

    46nori
    A
    license
    A
    quality
    D
    maintenance
    Enables AI agents to control serial port devices (modems, instruments, embedded boards) via MCP tools for listing ports, connecting, and sending/receiving commands.
    3
    1
    MIT

  • PPK2 MCP Server

    zhixuan2333
    F
    license
    A
    quality
    C
    maintenance
    Enables MCP clients to control a Nordic PPK2 for power profiling: configure source/measurement modes, set voltage, power DUT, measure current/power/energy, and capture logic channels.
    6

  • MHS-5200A MCP Server

    NaoNaoMe
    A
    license
    A
    quality
    C
    maintenance
    Enables control of MHS-5200A series signal generators via serial connection, including frequency, amplitude, waveform, and sweep settings.
    16
    MIT

  • siglent-sds-mcp

    MagnusJohansson
    A
    license
    A
    quality
    D
    maintenance
    An MCP server that enables AI assistants to control Siglent SDS oscilloscopes over a local network using SCPI commands. It allows users to measure signals, configure channel and acquisition settings, and capture waveforms or screenshots through natural language.
    13
    12
    5
    MIT

  • scpi-mcp

    armchairdeity
    A
    license
    A
    quality
    A
    maintenance
    An MCP server that enables AI agents to operate an oscilloscope through high-level tools like signal capture and measurement, abstracting vendor-specific SCPI commands.
    18
    1
    MIT

  • rs3005p-mcp

    Gigaclank
    A
    license
    A
    quality
    C
    maintenance
    An MCP server that lets AI agents control an RS PRO RS-3005P/RS-6005P programmable DC power supply over USB/RS232, enabling voltage/current control, measurements, output switching, and memory operations.
    14
    MIT

  • Sigmatek LASAL MCP Server

    Svel26
    F
    license
    A
    quality
    B
    maintenance
    Automates the Sigmatek LASAL software suite for PLC and HMI engineering, enabling AI assistants to inspect projects, apply structural changes, compile, download to hardware, and control PLC runtime.
    21

  • io.github.microhenrio/openocd

    microhenrio
    A
    license
    A
    quality
    B
    maintenance
    Debug microcontrollers directly from Claude. This is an MCP server that drives OpenOCD, letting Claude flash firmware, control execution, and inspect a running target — and read your variables and peripheral registers by name instead of raw addresses.
    39
    4
    MIT

  • te1000-mcp

    Edge-JB
    A
    license
    A
    quality
    A
    maintenance
    MCP server for Beckhoff TwinCAT XAE / TE1000 Automation Interface, enabling control of XAE Shell, TwinCAT tree manipulation, PLC operations, and build actions via natural language.
    25
    8
    MIT

  • UGS-MCP

    zackpeters93
    A
    license
    A
    quality
    B
    maintenance
    MCP server for controlling CNC machines via Universal GCode Sender. Lets Claude (or any MCP-compatible AI assistant) connect to a CNC machine, inspect G-code, and issue motion commands — all through the UGS Pendant REST API.
    19
    5
    MIT

  • FTC Toolchain

    Sanjit-K
    A
    license
    A
    quality
    B
    maintenance
    MCP server enabling AI agents to search FTC SDK samples, scaffold OpModes, build and deploy TeamCode to REV Control Hub, and read robot logs for a full code-robot-debug loop.
    35
    10
    MIT

  • siglent-sdg-mcp

    MagnusJohansson
    A
    license
    A
    quality
    D
    maintenance
    MCP server that lets AI assistants control Siglent SDG waveform generators over a local network using natural language, supporting signal generation, modulation, sweep, burst, and arbitrary waveforms.
    21
    8
    MIT