"Accessing Your Supabase Projects Dashboard" matching MCP servers:

An MCP server that lets an AI assistant manage your Keenetic router in plain language — list connected devices, pin static DHCP leases, rename devices, check WAN status, and reboot.

Check 22,000+ devices with open firmware or open protocols (OpenWrt, LineageOS, coreboot, Zigbee2MQTT, Tasmota…) before reverse engineering one; claim a device while you work on it and publish your findings when done.

MCP server that wraps STM32CubeMX CLI to let AI load .ioc projects, modify pin/peripheral configurations, generate HAL code, and export pinout tables.

Debug microcontrollers directly from Claude. This is an MCP server that drives OpenOCD, letting Claude flash firmware, control execution, and inspect a running target — and read your variables and peripheral registers by name instead of raw addresses.

Enables AI assistants to create projects, design interfaces, compile, analyze timing, and program boards for Trion, Titanium, and Topaz FPGAs through a local Efinity installation.

Enables AI coding agents to run a SystemVerilog LSP for linting, formatting, navigation, rename, RTL hierarchy inspection, and automated RTL code actions on real projects.

A read-only MCP server for AI agents to understand KiCad projects through progressive disclosure, providing compact summaries and drill-down tools for components, nets, traces, and ERC/DRC checks without blowing context budgets.

Enables MCP-speaking coding agents to talk directly to Home Assistant and the ESPHome dashboard: discovering entities and areas, reading live states, history and logs, rendering Jinja templates, calling services, and creating, editing or triggering automations and dashboards. Also allows ESPHome device configs to be read, validated, compiled and flashed, with all write operations off by default behind an explicit safety policy.

Automates the Sigmatek LASAL software suite for PLC and HMI engineering, enabling AI assistants to inspect projects, apply structural changes, compile, download to hardware, and control PLC runtime.

Enables AI clients to compile and upload Arduino sketches, manage boards, cores, and libraries via arduino-cli, scaffold projects, and read serial output over stdio.

Enables Claude Code to program, diagnose, and document Siemens TIA Portal V17 projects (S7-1200/1500) through TIA Openness, covering Ladder and SCL block creation, UDTs, PID_Compact configuration, PROFINET device/IP/subnet setup, tag organization, compilation, cross-references, call trees, and typical-fault diagnostics. It works only on project copies, never going online or downloading to the PLC.

Wraps Quartus II 9.1 command-line tools into MCP tools, enabling AI agents to create projects, assign pins, generate simulation waveforms, run simulations, compile, read reports, and program devices.

Automates Arduino CLI workflows including dependency checks, compile/upload, serial monitoring, and safety preflight checks, all running locally on your machine.

Talk to your Flipper Zero from Claude Code — or any MCP client. Storage, app deployment, screen capture, button automation, JavaScript execution on the device, and honest answers about what is nearby.

An MCP server that enables AI agents to inspect, plan, validate, and apply STM32CubeMX .ioc configuration changes, and generate STM32CubeIDE projects, ensuring safe and testable embedded-system workflows.

Enables creating and editing KiCad projects through natural language, including scaffolding projects, placing schematic symbols, wires and labels, and adding PCB footprints, tracks and nets. It also runs ERC/DRC checks and exports to PDF, SVG, netlist, BOM, STEP, DXF, gerbers and drill files via kicad-cli.

An MCP server that enables agents to build, test, and simulate complete ik firmware projects for 8-bit AVR microcontrollers, using real compilation and simulation tools.

Enables AI coding agents to build, flash, monitor serial output, run tests, decode crashes, and analyze firmware size for embedded PlatformIO projects.

Enables an agent to drive the Bambu Lab CyberBrick desktop app over the Chrome DevTools Protocol, covering the whole device setup workflow — planning hardware connections, authoring and reading firmware configuration, managing projects, and flashing firmware, MPY and config files to boards.

Enables MCP-compatible agents to perform read-only inspection of OpenPLC Editor projects, including retrieving project structure and listing programs, function blocks, and functions.

Exposes CAREL STone automation to AI agents so they can create projects, generate compilable ST code, build, read structured compiler diagnostics and symbol tables, and search System library APIs without opening the IDE — enabling a generate-build-diagnose-fix loop.

Read-only MCP server that lets AI assistants (Claude Code, Claude Desktop, VS Code, ...) inspect Altium Designer projects — schematics, netlist, BOM and PCB — on Linux, macOS or Windows, without Altium Designer installed.

Lets an AI assistant drive AMD/Xilinx Vivado without the GUI to create projects, build block designs, synthesize, implement, simulate, read reports, and generate bitstreams. Includes first-class Red Pitaya STEMlab 125-14 support for RTL and PS+PL builds and SSH deployment.

Enables AI coding assistants to drive Xilinx Vivado through natural language, letting users open .xpr projects, run synthesis, implementation, and bitstream generation, inspect timing, resource, and clock reports, and launch simulations to read signal values or set breakpoints. It also exposes design hierarchy queries and arbitrary TCL execution, so FPGA design flows can be operated conversationally on Windows.

An MCP server that enables AI assistants to analyze schematics, inspect PCBs, trace connections, validate designs, and generate embedded code for KiCad projects.

Connects MCP clients to live EasyEDA Pro projects, enabling schematic and PCB inspection and editing through natural language.

Enables AI clients to create, configure, validate, and generate STM32CubeMX projects through 113 MCP tools, including pin, clock, peripheral, RTOS, and middleware setup plus C code generation. It can drive an installed CubeMX engine or run fully standalone using a bundled data pack with real pin and mode validation.

Enables AI agents to build, flash, and debug STM32 projects compiled with Keil MDK-ARM on Windows, returning structured UV4 build diagnostics and evidence-based results. It also provides pyOCD/ST-Link debugging operations such as run control, breakpoints, register/PC reads, and global/static variable inspection.

Enables AI coding agents to build, flash, debug, and read feedback from STM32 development projects in Keil MDK, forming a closed loop to automatically fix code.

Enables an AI agent to drive a Beckhoff TwinCAT 3 setup end to end: read and write live PLC variables and system state over ADS, manage files and processes on the target IPC, build and edit projects through the XAE automation interface, capture and analyze long-running signal recordings, run scripted test benches and TcUnit suites, and look up the official Beckhoff Infosys documentation. Runs as a single Python process on the engineering PC with read-only, guarded, and full safety modes plus human-in-the-loop confirmation for destructive operations.

An open-source MCP server that turns natural language hardware descriptions into complete, buildable projects including circuits, firmware, 3D-printable enclosures, PCB files, and documentation.

Enables AI agents to build, flash, and monitor ESP-IDF projects on real hardware, including serial sessions and pytest-embedded hardware tests.

Enables AI agents and humans to control various hardware boards (ESP32, Arduino, Raspberry Pi, etc.) through a unified API via MCP, with real-time dashboard support.

Enables AI tools to manage Renesas e2studio projects, including building, flashing, and debugging embedded code through MCP tools and resources.

Enables automated generation of FreeRTOS embedded projects for chips like BK7252, STM32F4, and ESP32. Provides intelligent project structure creation, peripheral driver code generation, and complete embedded development workflows through natural language interaction.

Enables OpenCode sessions to compile Nintendo 3DS projects into .3dsx files, clean build artifacts, check devkitARM toolchain health, and list available libraries and predefined groups through a rootless podman container.

Enables Claude and Codex to inspect STM32 projects, flash compiled firmware to J-Link targets, verify and run it, and collect runtime evidence and diagnostics through RTT and SystemView.

Enables Claude Code to drive ctrlX PLC Engineering (CODESYS V3) through the CODESYS Scripting Engine, including reading and writing POUs, building, going online, starting/stopping, accessing variables, and recording traces.

It lets any MCP-capable AI agent operate a real Siemens TIA Portal project — configuring hardware and networks, creating blocks, writing SCL, compiling, simulating via PLCSIM Advanced, and reading results back for verification. It runs locally alongside TIA Portal through Openness, so agents work with live projects rather than code snippets.

Wraps Vector DaVinci Configurator 6/5 and DaVinci Developer Classic command-line tools into MCP tools so AI agents can validate, update, generate, compare, and inspect AUTOSAR projects with structured operations, background jobs, Groovy automation, ECUC analysis, version detection, and generated-file reporting.