Rib
create_ribAdds a rib from an open sketch line to stiffen a wall or shell interior; extends to adjacent walls and returns before/after volume data.
Instructions
Add a rib from a sketched line, stiffening a wall or the inside of a shell.
Sketch an open line where the rib goes (it can stop short of the walls; the
rib extends to meet them), close the sketch, then call this with its name.
It fails when the volume doesn't change. Needs: an open part and the rib
sketch. Changes: adds a Rib feature. Returns: rib with name, sketch,
thickness_mm, and volume_before, volume_after and volume_change (mm³).
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"input_data": "<input_data>"
},
"name": "create_rib"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| input_data | Yes | The rib. `sketch` and `thickness` (mm) are required; `both_sides` is on. |
Output Schema
| Name | Required | Description | Default |
|---|---|---|---|
No arguments | |||