Create Reference Plane
create_reference_planeCreates a reference plane offset from, angled to, or placed on a face or plane, so you can sketch beyond SolidWorks' three default planes.
Instructions
Add a reference plane offset from, at an angle to, or on a plane or flat face.
Use it to sketch somewhere other than the three default planes: pass the new
plane's name to create_sketch. Offset: reference and a non-zero offset
(mm). Angle: reference, angle (degrees) and axis, an axis lying in the
reference (make one with create_axis). Face: face_point, a point on a flat
face (sloped or not), with an offset or 0 for a plane on the face. Needs: an
open part. Changes: adds a plane feature. Returns: plane with name and the
inputs used.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"input_data": "<input_data>"
},
"name": "create_reference_plane"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| input_data | Yes | The plane. Exactly one of `reference` and `face_point`; then `offset`, or `angle` with `axis`; `flip` is off. |
Output Schema
| Name | Required | Description | Default |
|---|---|---|---|
No arguments | |||