Add Sketch Chamfer
add_sketch_chamferBevels corners of an open 2D sketch by selecting corner points, trimming adjoining entities and creating chamfer lines. Use it for sketch-profile chamfers; use add_chamfer for solid edges.
Instructions
Bevel corners of the open sketch, picking each corner by its point.
Use it for bevelled corners of a 2D profile; bevel a solid's edges with
add_chamfer instead, last in the feature tree. distance alone cuts the same
distance along both sides; add distance2 for a different second side, or
angle (degrees) for a distance and an angle. Needs: an open sketch with
entities meeting at each corner ([x, y] in sketch mm). Changes: each corner
becomes a line and the entities either side are trimmed back to it. Returns:
chamfer with one id per corner, the corners and the sizes. A corner
with no sketch point fails as invalid_input and nothing changes.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"input_data": "<input_data>"
},
"name": "add_sketch_chamfer"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| input_data | Yes | `corners` and `distance` (mm) are required; `distance2` (mm) or `angle` (degrees), not both. |
Output Schema
| Name | Required | Description | Default |
|---|---|---|---|
No arguments | |||