ATtiny85 CDC ACM Relay Controller

USB CDC ACM device (ttyACM) on DigiSpark ATtiny85 for controlling an induction relay via serial break signal.

Relay Logic

Related MCP server: serial-mcp

Custom USB Device Name

The USB product name is stored in EEPROM and can be changed at runtime. Send the command 0xAA <length> <name bytes> on the ttyACM data channel. The device writes the name to EEPROM, reloads the USB descriptor, and re-enumerates — no reboot required. The new name is visible in lsusb. Maximum length: 64 characters.

Default name: ATtiny Relay

Firmware

Requires: avr-gcc, micronucleus

make            # build firmware
make flash      # flash via micronucleus (re-plug DigiSpark when prompted)

V-USB library is cloned automatically on first build.

Python Installation

pip install .          # API library only
pip install .[mcp]     # API + MCP server

Python API

from relay_control import RelayControl

with RelayControl() as r:
    r.relay_off()               # PB0 HIGH, relay OFF (serial break)
    r.relay_on()                # PB0 LOW, relay ON (break cleared)
    r.set_name("My Relay")      # change USB device name (auto-reconnects)
    print(r.name)               # read current USB product name

MCP Server

The package provides an MCP server for use with Claude Code via mcp-compressor.

Setup

Add to ~/.claude.json in the mcpServers section:

{
  "mcpServers": {
    "usb-relay": {
      "command": "mcp-compressor",
      "args": ["-n", "usb-relay", "-c", "max", "usb-relay-mcp"]
    }
  }
}

Restart Claude Code after editing the config.

Tools

Tests

make test       # runs pytest against real hardware