"Axure - A platform for prototyping and wireframing" matching MCP tools:

• check_dkim_selectorA

  dns-doctorA

  Use this when the user asks whether DKIM is set up for a sending platform, whether a specific selector exists, or why DKIM fails. Check ONE specific DKIM selector on a domain — the exact selector the sending platform uses (e.g. `google`, `s1`), which a full scan's common-selector sweep may miss. Returns the verdict, its explanation, and the published key record when one resolves. No fix record is returned: a DKIM key is generated by the sending platform, so the fix is always to publish what that platform gives the owner.

  ConnectorNo auth

• connect_domainA

  LayeroA

  Connect a custom domain to a site. IMPORTANT: between this call and a working domain stands A PERSON. You get DNS records — show them to the user and explain they go in at their domain registrar. Do not wait for readiness: DNS propagates in minutes to an hour, the platform re-checks on its own, and you check later via `check_domain`. Spinning here burns time and context for nothing. The address can be passed as-is: the platform reduces `https://shop.example.com/page` to `shop.example.com` itself.

  ConnectorOAuth

• connect_domainA

  LayeroA

  Connect a custom domain to a site. IMPORTANT: between this call and a working domain stands A PERSON. You get DNS records — show them to the user and explain they go in at their domain registrar. Do not wait for readiness: DNS propagates in minutes to an hour, the platform re-checks on its own, and you check later via `check_domain`. Spinning here burns time and context for nothing. The address can be passed as-is: the platform reduces `https://shop.example.com/page` to `shop.example.com` itself.

  ConnectorAPI key

• get_channel_analyticsA

  postnextA

  Aggregate performance for one connected channel, or for every channel at once. Returns impressions, reach, likes, comments and engagement rate for the period, the change against the preceding period of the same length, and the follower series. Omit `platform` for a team-wide total; pass `platform` (plus `channelName` or `providerId` from list_connected_accounts when that platform has more than one account connected) to scope it. `providerId` still identifies the account after its handle changes. `period` is 7d, 30d, 90d or all, defaulting to 30d. Use this for "how did LinkedIn do this month?"; use get_post_metrics for a single post and get_best_time_to_post for scheduling.

  ConnectorAPI key

• lookup_profilesA

  InflushipA

  Batch-fetch up to 100 profiles by (platform, username) pairs. Use this when the user has a list of handles and you need profile data for all of them at once (e.g., "give me follower counts for these 30 accounts I'm considering" or "which of @a @b @c are real accounts?"). One round-trip beats 30 calls to `get_profile`. Use this for exact batch handle lookup, not semantic discovery. For one exact platform+username pair, use `get_profile`. For partial or fuzzy handle/name input, use `search_creators` or `autocomplete_creators`. Use `semantic_search_creators` only for topical/niche/audience discovery where false-positive semantic matches are acceptable. Examples: - User: "Compare @a, @b, and @c on Instagram" -> use this tool for the exact handle batch. - User: "Give me follower counts for these 30 accounts" -> use this tool. - User: "Find wellness creators in Austin" -> use `semantic_search_creators`, not this tool. The response splits results into `data` (profiles found) and `not_found` (the (platform, username) pairs that weren't recognized). Profiles are returned in no particular order — re-correlate via the platform/username fields if you need to preserve input order.

  ConnectorNo auth

• lookup_profilesA

  Influship Influencer Marketing MCPA

  Batch-fetch up to 100 profiles by (platform, username) pairs. Use this when the user has a list of handles and you need profile data for all of them at once (e.g., "give me follower counts for these 30 accounts I'm considering" or "which of @a @b @c are real accounts?"). One round-trip beats 30 calls to `get_profile`. Use this for exact batch handle lookup, not semantic discovery. For one exact platform+username pair, use `get_profile`. For partial or fuzzy handle/name input, use `search_creators` or `autocomplete_creators`. Use `semantic_search_creators` only for topical/niche/audience discovery where false-positive semantic matches are acceptable. Examples: - User: "Compare @a, @b, and @c on Instagram" -> use this tool for the exact handle batch. - User: "Give me follower counts for these 30 accounts" -> use this tool. - User: "Find wellness creators in Austin" -> use `semantic_search_creators`, not this tool. The response splits results into `data` (profiles found) and `not_found` (the (platform, username) pairs that weren't recognized). Profiles are returned in no particular order — re-correlate via the platform/username fields if you need to preserve input order.

  ConnectorNo auth

• get_analytics_overviewA

  AdaptlyPostA

  Workspace-wide performance for a date window: views, likes, comments, shares, followers, posts published, average views per post and engagement rate, each as { value, previousValue, deltaPercent } against the window of the same length just before it. Use this for "how did we do this month" questions and for follower counts. Metrics are summed over the selected platforms; partialMetrics names metrics some selected platform cannot report, and a metric no platform reports is null. Analytics cover the last 180 days and refresh every few hours (lastSyncedAt says when); if the user just published, call trigger_analytics_sync first. Use get_analytics_timeseries for a trend, get_platform_breakdown to compare platforms, and list_post_analytics for individual posts.

  ConnectorOAuth

• get_creatorA

  InflushipA

  Fetch the full record for a single creator by ID or exact platform username. Use this when you already have either: - a canonical creator UUID returned by `search_creators`, `semantic_search_creators`, `autocomplete_creators`, or `find_lookalike_creators`; or - an exact platform+username pair such as platform "instagram" and username "niickjackson". Pass `include: ['profiles']` to also receive the creator's social profile summaries when using a creator UUID. For platform+username inputs, this tool resolves through the profile endpoint and returns the profile record plus the underlying creator record, so you already get the matched profile context. Examples: - User: "Get creator 123e4567-e89b-12d3-a456-426614174000" -> call with id. - User: "Get @niickjackson on Instagram" -> call with platform "instagram" and username "niickjackson", or use `get_profile` if profile metrics are the main need. - User: "Tell me about @niickjackson and include his profiles" -> use platform "instagram" and username "niickjackson"; then use `get_profile`/`get_posts` for platform-specific metrics and content if needed. Use `lookup_profiles` for batch exact profile lookups.

  ConnectorNo auth

• get_creatorA

  Influship Influencer Marketing MCPA

  Fetch the full record for a single creator by ID or exact platform username. Use this when you already have either: - a canonical creator UUID returned by `search_creators`, `semantic_search_creators`, `autocomplete_creators`, or `find_lookalike_creators`; or - an exact platform+username pair such as platform "instagram" and username "niickjackson". Pass `include: ['profiles']` to also receive the creator's social profile summaries when using a creator UUID. For platform+username inputs, this tool resolves through the profile endpoint and returns the profile record plus the underlying creator record, so you already get the matched profile context. Examples: - User: "Get creator 123e4567-e89b-12d3-a456-426614174000" -> call with id. - User: "Get @niickjackson on Instagram" -> call with platform "instagram" and username "niickjackson", or use `get_profile` if profile metrics are the main need. - User: "Tell me about @niickjackson and include his profiles" -> use platform "instagram" and username "niickjackson"; then use `get_profile`/`get_posts` for platform-specific metrics and content if needed. Use `lookup_profiles` for batch exact profile lookups.

  ConnectorNo auth

• create_postA

  AdaptlyPostA

  Create one post for one or more platforms: publish now, schedule, or save a draft. Omit scheduledAt to publish immediately; a future scheduledAt sets status SCHEDULED; saveAsDraft stores it as DRAFT and defers validation to publish_draft. Publishing runs asynchronously per platform, so the response ({ postId, queuedPlatforms, isScheduled, scheduledAt }) is not the outcome; read list_post_results, where each platform succeeds or fails on its own. Call list_accounts first: each platform in platforms needs its connection-id array (linkedinConnectionIds, pageIds for Facebook, and so on), one account per platform. TikTok needs tiktokConfigs with privacyLevel; Pinterest needs pinterestConfigs with boardId. For a LinkedIn document (PDF, slides or Word file) use contentType DOCUMENT with the one file in mediaUrls and only LINKEDIN in platforms. mediaUrls must come from upload_media, or the call fails with "Media file(s) not found in storage". Pass recurrence with a future scheduledAt to repeat the post daily, weekly or monthly; the response then adds recurringPostId and postId is the first occurrence. Use bulk_schedule_posts for many posts on the same accounts, and update_post or publish_draft for an existing post.

  Connector

  Destructive

  OAuth

• publish_draftA

  AdaptlyPostA

  Publish a DRAFT post now or schedule it; SCHEDULED posts are accepted too, to reschedule or push live. Other statuses fail with "Post is not a draft". Without scheduledAt (or with a past one) the post moves to PENDING and a publishing job is queued per platform: content reaches the networks within moments and cannot be recalled. A future scheduledAt sets SCHEDULED and queues nothing yet. Fails if an account was disconnected or a TikTok entry lacks privacyLevel; fix with update_post first. Not for new content, use create_post. Check list_post_results afterwards for per-platform outcomes.

  Connector

  Destructive

  OAuth

• retry_failed_platformsA

  AdaptlyPostA

  Re-queue publishing for a post's FAILED platforms. platformIds takes platformId values from list_post_results, platform names such as "BLUESKY" (every failed row of that platform), or can be omitted to retry every failed row. Only rows with status FAILED are reset to PENDING and retried with the same content. A value matching neither a row id nor a platform of the post fails with "Unknown retry target"; with nothing failed among the matches the call fails with "No failed platforms to retry". The post moves to PUBLISHING and the retry is asynchronous, so check list_post_results for the outcome. Read each errorMessage first and retry once the cause is fixed (reconnected account, replaced media), not for a platform-side restriction, which will just fail again. Content cannot change on retry.

  Connector

  Destructive

  OAuth

• delete_postA

  iHatePostingA

  Delete a post from iHatePosting. ONE SEND AT A TIME: a post going to several accounts is stored as one post PER SEND, so deleting one cancels only that platform and leaves the rest scheduled — pass the `postId` that create_post returned on that particular send, or the id of the row list_posts shows for it. There is no need to cancel a whole multi-platform post to drop one platform from it. THIS DOES NOT UNPUBLISH ANYTHING: a post that has already gone out stays live on the network, and deleting it here only removes iHatePosting's record of it. For that reason a published post is refused unless you pass force: true, and you should only do that after telling the user in words that the platform post will remain. A post that is publishing at this moment is never deletable, forced or not — the worker is mid-flight on it. Deleting a scheduled post stops it going out.

  Connector

  Destructive

  No auth

• get_creatorA

  SocialGPTA

  Get a public/competitor creator's profile by platform + handle (e.g. instagram, 'natgeo'). Only returns creators already in the analysis library; it does not ingest. For a creator you haven't pulled in yet this returns reason="creator_not_in_library" (not an error) with a next_step of analyze_creator(platform, username) — call that (needs the content:ingest scope), wait for it to finish, then retry.

  ConnectorOAuth

• sti_get_platformsA

  Stimulsoft Documentation MCP ServerA

  List every Stimulsoft product/platform that has indexed documentation available through this MCP server. Returns a JSON array of { id, name, description } objects covering the full Stimulsoft Reports & Dashboards product line (Reports.NET, Reports.WPF, Reports.AVALONIA, Reports.WEB for ASP.NET, Reports.BLAZOR, Reports.ANGULAR, Reports.REACT, Reports.JS, Reports.PHP, Reports.JAVA, Reports.PYTHON, Server API, etc.). CALL THIS FIRST when the user's question is ambiguous about which Stimulsoft platform they are using, or when you need to pick a valid `platform` value to pass into `sti_search`. The returned platform `id` values are the exact strings accepted by the `platform` parameter of `sti_search`. This tool is cheap (no OpenAI call, no vector search) — call it freely whenever you are unsure about platform naming.

  ConnectorNo auth

• get_profileA

  InflushipA

  Fetch a single social profile by (platform, username). Always use this first when the user gives an exact handle on a specific platform (for example "@niickjackson on Instagram") and you need the full profile: bio, follower/engagement metrics, recent activity, growth, and the canonical creator ID. Pass exactly the username they typed without the @ sign — case-insensitive matching is handled server-side. Do not use `search_creators` for an exact platform+username lookup. Examples: - User: "Pull @niickjackson on Instagram" -> use this tool with platform "instagram" and username "niickjackson". - User: "Tell me about instagram.com/niickjackson" -> parse the platform and username, then use this tool. - User: "Is @niickjackson a fit for Pixel?" -> use this tool first, then call `get_posts` and/or `match_creators` if the task needs content or fit analysis. Returns the profile record plus the underlying creator record. If you already have a creator UUID, use `get_creator` instead. For batch lookups by handle, use `lookup_profiles`.

  ConnectorNo auth

• get_profileA

  Influship Influencer Marketing MCPA

  Fetch a single social profile by (platform, username). Always use this first when the user gives an exact handle on a specific platform (for example "@niickjackson on Instagram") and you need the full profile: bio, follower/engagement metrics, recent activity, growth, and the canonical creator ID. Pass exactly the username they typed without the @ sign — case-insensitive matching is handled server-side. Do not use `search_creators` for an exact platform+username lookup. Examples: - User: "Pull @niickjackson on Instagram" -> use this tool with platform "instagram" and username "niickjackson". - User: "Tell me about instagram.com/niickjackson" -> parse the platform and username, then use this tool. - User: "Is @niickjackson a fit for Pixel?" -> use this tool first, then call `get_posts` and/or `match_creators` if the task needs content or fit analysis. Returns the profile record plus the underlying creator record. If you already have a creator UUID, use `get_creator` instead. For batch lookups by handle, use `lookup_profiles`.

  ConnectorNo auth

• list_localesA

  Molt2MeetA

  List locales supported by the Molt2Meet platform. Returns the URL slug (e.g. 'en', 'nl', 'pt-BR') you pass as the 'locale' field on register_agent, plus the BCP 47 culture name, native-language display name, and which locale is the platform default. No authentication required. Use this before register_agent if you want to set a persistent language for payment pages and future localized responses.

  ConnectorNo auth

• sti_get_platformsA

  docsA

  List every Stimulsoft product/platform that has indexed documentation available through this MCP server. Returns a JSON array of { id, name, description } objects covering the full Stimulsoft Reports & Dashboards product line (Reports.NET, Reports.WPF, Reports.AVALONIA, Reports.WEB for ASP.NET, Reports.BLAZOR, Reports.ANGULAR, Reports.REACT, Reports.JS, Reports.PHP, Reports.JAVA, Reports.PYTHON, Server API, etc.). CALL THIS FIRST when the user's question is ambiguous about which Stimulsoft platform they are using, or when you need to pick a valid `platform` value to pass into `sti_search`. The returned platform `id` values are the exact strings accepted by the `platform` parameter of `sti_search`. This tool is cheap (no OpenAI call, no vector search) — call it freely whenever you are unsure about platform naming.

  ConnectorNo auth

• wait_for_taskA

  Agent RouterC

  Wait for a platform agent task to complete and return its result. Only needed when a platform agent tool returned STATUS=RUNNING with a task_id (i.e. the task was still running after the initial 50s inline wait). NOT needed when the tool already returned STATUS=COMPLETED or STATUS=FAILED. NOT needed for a2a_call_agent — that always returns directly. Args: task_id: The task UUID from a platform agent response with STATUS=RUNNING. max_wait_seconds: Max seconds to wait (default 45, max 300).

  ConnectorNo auth

• transaction_suggest_transaction_categoryA

  Lovie Company FormationB

  Recommend a bookkeeping category for a transaction using the platform classifier agent. Returns ranked taxonomy option codes with confidence and a short rationale; writes nothing. Apply one with CategorizeTransaction.

  ConnectorNo auth