"Sumo Logic" matching MCP servers:

Enables MCP clients like Cursor to control logic analyzers, open capture files, decode buses such as Intel 8080, and reconstruct display framebuffers like ST7789.

Enables MCP clients to capture digital waveforms from an ALIENTEK USB logic analyzer, run 208 sigrok protocol decoders with stacked chains (like I2C→SSD1306 or UART→Modbus), and analyze or write .atkdl waveform archives offline without the device attached.

AI-driven USB logic analyzer control via FastMCP. Captures digital traces, decodes UART/I2C/SPI, and exports VCD for PulseView, supporting sigrok hardware and built-in simulator.

Enables AI assistants to control Saleae Logic analyzers, capture and analyze digital/analog signals, and export data via MCP.

Enables MCP clients to control a Nordic PPK2 for power profiling: configure source/measurement modes, set voltage, power DUT, measure current/power/energy, and capture logic channels.

Enables AI agents to design hardware by writing C-like HDL and compiling it to Verilog, with real toolchain verification including synthesis checks.

Enables LLMs to control a Nordic Power Profiler Kit II over USB serial for current capture (500 nA–2000 mA at 100 kSa/s plus 8 logic channels) and DUT power sourcing (0.8–5 V), with samples written to npz files. Also supports offline analysis such as statistics, activity/duty-cycle segmentation, and battery-life estimation.

Enables lossless parsing, inspection, validation, simulation, and creation or editing of FATEK .ldr ladder-logic files through local stdio MCP tools, including a user-import-verified start/stop template. New files are written to an artifacts directory so existing files and original samples are never overwritten.

MCP server that exposes all functionality of sigrok-cli as MCP tools, enabling hardware initialization, signal acquisition, and protocol decoding for logic analyzers.

Enables live tag read/write access to Rockwell Automation Logix5000 controllers over EtherNet/IP without requiring Studio 5000 Logix Designer, including discovery, tag listing, and batch operations.

MCP server for BusPirate 6 hardware security testing. Exposes UART, SPI, I2C, 1-Wire, power supply, GPIO, and logic analyzer operations as tools.

Enables AI agents to capture, decode, and analyze signals from logic analyzers and measurement devices via sigrok-cli, supporting I2C, SPI, UART, CAN, and 100+ protocols.

Local MCP server for building an agent-facing integration around DreamSourceLab DSView. Enables native logic capture, protocol decode, and analysis with artifact management for I2C, SPI, and UART.