mi-medical-exclusions
This server has a remotely hosted endpoint. Open its connector listing for connection details, authentication requirements, and setup instructions:
@pipeworx/mi-medical-exclusions
Michigan Medicaid provider sanctions screening. Check a provider by name, NPI or
license number against the Michigan Department of Health and Human Services
(MDHHS) List of Sanctioned Providers, the state-level counterpart to the federal
HHS OIG LEIE (leie pack) and sibling of il-medical-exclusions,
tx-medical-exclusions, ny-omig-exclusions, ca-medical-exclusions and
fl-medical-exclusions.
Part of Pipeworx — an MCP gateway connecting AI agents to 1865+ live data sources. This is an independent, unofficial integration — not affiliated with, endorsed by, or published by the upstream provider.
Tools
mi_medical_check_exclusion(name?, npi?, license?, limit?): screens a provider. An NPI or license match is an identification; a name match, even an exact one, is a candidate lead only (no date of birth is published). The response leads with counts by sanction source, then the matches. Each match carries the sanction date and source, a second sanction date and source where present (often the action being lifted), provider category and MDHHS's reason text. A no-match names the filters tried.mi_medical_exclusion_coverage(year? | start_date? end_date?): totals by sanction source, individuals vs businesses, NPI, license and reason coverage, oldest and newest sanction date and the list's own publication date. Withyearor a date range it counts sanctions in that window over the whole list, split by sanction source. The counted field issanction_date(the first Sanction Date column), never the second date; the response says so.
Related MCP server: PA Medical Exclusions MCP Server
Auth
Keyless.
Data source
Michigan Department of Health and Human Services, List of Sanctioned Providers
(4,111 rows at capture). It merges sanctions from MDHHS, its Office of Inspector
General, Licensing and Regulatory Affairs, the former DCH and HHS; each row names
its source. data_as_of is the publication date printed on the list itself.
What the list does and does not say
MDHHS says the list is built partly from outside sources and may be incomplete.
The reason field is free text and is blank on about 60% of rows; some values are Social Security Act section numbers such as
1128(a)(1), not plain language.No date of birth and no reinstatement flag. When an action was lifted the row usually stays with a second date (for example "Summary Suspension Terminated"), so read
reasonandsecond_sanction_datetogether before calling anyone currently sanctioned.
Personal data
The list has a City column. It is kept for businesses only; for any individual it is dropped at ingest, and a test asserts it. No street address or date of birth is published or served. This follows the standing rule for state exclusion packs: name plus the sanction record plus the date, never an address for an individual.
How the data is served
The publication is a bulk spreadsheet, not a query service. It is copied by
scripts/bake-index.mjs, registered in
workers/gateway/src/pack-baked-indexes.json, uploaded to KV at deploy and
injected as args._bakedIndex (never a module-scope import; fleet #2754). A
missing or malformed injection throws loudly rather than answering "not found".
Refresh: re-run node mcps/mi-medical-exclusions/scripts/bake-index.mjs and
commit; there is no scheduled refresh yet, same as the sibling baked packs.
Quick Start
Add to your MCP client (Claude Desktop, Cursor, Windsurf, etc.):
{
"mcpServers": {
"mi-medical-exclusions": {
"url": "https://gateway.pipeworx.io/mi-medical-exclusions/mcp"
}
}
}What this endpoint actually serves
tools/list at https://gateway.pipeworx.io/mi-medical-exclusions/mcp returns the tools in the table
above plus the shared Pipeworx meta-tools — ask_pipeworx,
discover_tools, search_within, remember/recall and the rest of the
gateway-wide set. So the tool count you see is larger than this table: a
single-pack endpoint currently lists roughly 30 shared tools alongside the
pack's own. The connection's initialize response states its exact scope, and
is the authoritative answer for a given day.
This is deliberate, not multiplexing by accident. The meta-tools are what let a
scoped connection answer a question this pack does not cover — via
ask_pipeworx, which routes across the whole catalog — without you adding a
second MCP server. There is currently no way to mount a pack endpoint without
them; if the extra schemas cost you more context than the routing is worth,
connect to the full gateway once rather than to several pack endpoints.
Or connect to the full Pipeworx gateway to get every pack's tools listed directly, instead of just this one's:
{
"mcpServers": {
"pipeworx": {
"url": "https://gateway.pipeworx.io/mcp"
}
}
}Both URLs reach the same gateway and the same 1865+ data sources. The
only difference is which pack's tools are listed directly; ask_pipeworx
reaches all of them from either one.
No MCP client? Call it over HTTP
curl -X POST https://gateway.pipeworx.io/v1/tools/mi_medical_check_exclusion \
-H 'Content-Type: application/json' \
-d '{"name":"1st Priority Physical Therapy"}'No account needed for the first calls. Inspect any tool: GET https://gateway.pipeworx.io/v1/tools/mi_medical_check_exclusion. Find one: POST https://gateway.pipeworx.io/v1/tools/search_packs with {"query":"..."}.
Run it from npm
@pipeworx/mcp-mi-medical-exclusions is a local stdio bridge to the Pipeworx gateway: your MCP client
starts it with npx, and it forwards every call to the same
https://gateway.pipeworx.io/mi-medical-exclusions/mcp endpoint shown above. It needs network access;
there is no offline mode.
{
"mcpServers": {
"mi-medical-exclusions": {
"command": "npx",
"args": ["-y", "@pipeworx/mcp-mi-medical-exclusions"]
}
}
}Without a key it calls anonymously, capped at 50 calls a day. A free account
raises that to 200 a day: get a key at https://pipeworx.io/signup and add
"env": { "PIPEWORX_API_KEY": "<your key>" } to the server entry.
The key is sent as a Bearer token, the same way a hosted connection sends it,
so calls are metered and billed exactly as they are there.
It lists only this pack's tools by default. Set PIPEWORX_META_TOOLS=1 to
also list ask_pipeworx and the other gateway-wide tools.
Behind an HTTPS proxy: Node's built-in fetch does not read HTTPS_PROXY by
default. Newer Node releases honour it when NODE_USE_ENV_PROXY=1 is set; check
your Node version's documentation.
Using with ask_pipeworx
Instead of calling tools directly, you can ask questions in plain English — this works on the pack endpoint above as well as on the full gateway:
ask_pipeworx({ question: "your question about Mi Medical Exclusions data" })The gateway picks the right tool and fills the arguments automatically.
More
License
MIT
Tool Schema Changelog
Recent tool additions, removals, and schema changes observed during successful MCP inspections.
Loading tool schema changelog…
This server cannot be deployed
Maintenance
Related MCP Connectors
Florida AHCA Medicaid Sanctioned Providers screening — check a provider name, NPI, Florida license…
Screen people and businesses against the HHS-OIG exclusion list (LEIE) by name or NPI.
Illinois Medicaid provider sanctions screening: the Illinois Department of Healthcare and Family…
Screen people & companies against 12 US sanctions & exclusion lists (OFAC, LEIE, SAM, Medicaid).
Related MCP Servers
- AlicenseNot gradedqualityCmaintenanceEnables screening a provider by name, NPI, or ODM Provider ID against Ohio Medicaid's ~2,122-row roster of suspended and barred individuals and organizations, returning status and active-flag details for each hit, along with a companion tool that reports list coverage and counts by effective-date range.71 npmMIT
- AlicenseNot gradedqualityCmaintenanceScreens providers by name, NPI, license number, or FEIN against Pennsylvania DHS's Medicheck list of roughly 6,750 individuals and businesses ever precluded from the state's Medical Assistance program, flagging current status and noting when DHS's own status field is blank. Also reports coverage statistics such as total rows, currently precluded vs. ended counts, identifier coverage, distinct status values, and date ranges.112 npmMIT
- AlicenseNot gradedqualityCmaintenanceScreens Medicaid providers against New York State OMIG's exclusion list by name, NPI, or license number, distinguishing exact identifier matches from name-only candidate leads. Also reports coverage details such as total exclusions, provider-type diversity, date ranges, and how stale the baked copy is.87 npmMIT
- AlicenseNot gradedqualityCmaintenanceEnables screening a provider by name, NPI, or license/provider number against California DHCS's ~23,400-row Medi-Cal Suspended and Ineligible Provider List. Also reports list coverage, provider-type diversity, the list-wide statutory basis, and data freshness.101 npmMIT