Create or update a signal type
save_signal_typeCreate or update a wire signal type to define what a wire carries and the color it draws; set gauge, voltage, category, and visibility.
Instructions
Create a signal type (what a wire carries and the color it draws in), or update one you own (pass signal_id). Comms types draw dashed and let a terminal take several wires without a fan-out. Free users' signal types are always public; Pro ones default to private. Built-in types are read-only.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"name": "<name>",
"color": "<color>"
},
"name": "save_signal_type"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| awg | No | Default wire gauge, AWG: "18", "14", "1/0". null clears it. | |
| mm2 | No | Default wire gauge as a cross-section in mm², e.g. 0.75. null clears it. Set either or both. | |
| name | Yes | ||
| color | Yes | Insulation color as hex, e.g. #7C3AED | |
| volts | No | Nominal voltage of this signal, e.g. 24 or 120; the voltage-drop check divides by it. null clears it (no drop check). | |
| dashed | No | Draw dashed (cables / comms). Default: true for comms | |
| phases | No | 1 for DC and single-phase (the default), 3 for three-phase (√3 in the drop formula). null clears it (treated as 1). | |
| public | No | ||
| category | No | other | |
| signal_id | No | ||
| color_name | No | Readable color name, e.g. "Violet" or "White/Blue" | |
| stripe_color | No | Tracer stripe as hex, or null for none |