route_track
Draw a copper track for one net by hand as a single change: set corners on one layer or connect pads, let the router find the path, and list copper violations. Use when autorouting cannot finish a net.
Instructions
Copper track (not a schematic trace): draw one of a net by hand as ONE change: corners on one layer, or from and to pads (via: corners between; none: the router finds the path or says what is in the way). It starts on the net's copper, not a locked part's pad, and touches no other net. The answer lists copper violations. For what autoroute could not route.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"file": "<file>"
},
"name": "route_track"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| to | No | ||
| net | No | Needed with points | |
| via | No | Corners between from and to; none: the router finds the path | |
| file | Yes | Circuit file | |
| from | No | e.g. "C3.pin2" or "U2.GND" | |
| layer | No | Needed with points; inner1, inner2 only on 4 layers | |
| width | No | mm; default the net class's | |
| points | No | Corners in mm; the first on the net's copper |