xer-mixa-mcp
by Ziforge
README.md
# xer-mixa-mcp
MCP server for the Noise Engineering **Xer Mixa** stereo mixer.
The Mixa has only TRS MIDI (type A), so the server sends through whichever
MIDI port feeds that jack: a USB-MIDI interface, or, as written for here, an
Expert Sleepers **disting NT** acting as the bridge:
1. NT `Settings > MIDI > Forwarding`: **USB -> Breakout** On.
2. NT header J10 pins 1/2 (MIDI out) wired to a Tiny MIDI Breakout socket
(pin 2 -> tip, pin 1 -> ring; check against the NT manual's J10 diagram).
3. TRS cable from that socket to the Mixa's **MIDI A In**.
With **USB -> Select Bus** also On, the same port changes Make Noise René and
Tempi states (Program Change on channel 1), so `select_bus_state` is included.
The CC map is transcribed from the manual's MIDI specification
(noiseengineering.us/manuals/xm); the tests check it against that table.
## Install
```sh
uv sync
claude mcp add xer-mixa -- uv run --directory /path/to/xer-mixa-mcp python -m xer_mixa_mcp.server
```
| Env var | Default | Must match on the Mixa |
|---|---|---|
| `XER_MIXA_MIDI_PORT` | `disting NT` | (port name substring) |
| `XER_MIXA_CHANNEL` | `16` | Config > MIDI > Chan In |
| `XER_MIXA_CC_BASE` | `21` | Config > MIDI > CC# Base |
## Tools
`mixer_info`, `configure`, `set_channel` (volume, mute, pan, sends),
`mute` / `unmute` (channels, lists, `inputs`, `returns`, `all`),
`set_output_level` (needs Bus CC = On), `load_scene` (A-G), `send_cc`,
`select_bus_state`, `port_status`, `connect_port`, `release_port`,
`start_midi_capture`, `get_captured_midi`.
The Mixa acknowledges nothing. If a call reports sent but nothing changes,
open Config > MIDI > Log on the Mixa to see what arrives.
Not affiliated with Noise Engineering, Expert Sleepers or Make Noise.
MIT
This server cannot be deployed
Maintenance
ActivityMaintained
ResponsivenessNo recent community issues