Skip to main content
Glama
xer-mixa-mcp

xer-mixa-mcp

by Ziforge

xer-mixa-mcp

MCP server for the Noise Engineering Xer Mixa stereo mixer.

The Mixa has only TRS MIDI (type A), so the server sends through whichever MIDI port feeds that jack: a USB-MIDI interface, or, as written for here, an Expert Sleepers disting NT acting as the bridge:

  1. NT Settings > MIDI > Forwarding: USB -> Breakout On.

  2. NT header J10 pins 1/2 (MIDI out) wired to a Tiny MIDI Breakout socket (pin 2 -> tip, pin 1 -> ring; check against the NT manual's J10 diagram).

  3. TRS cable from that socket to the Mixa's MIDI A In.

With USB -> Select Bus also On, the same port changes Make Noise René and Tempi states (Program Change on channel 1), so select_bus_state is included.

The CC map is transcribed from the manual's MIDI specification (noiseengineering.us/manuals/xm); the tests check it against that table.

Install

uv sync
claude mcp add xer-mixa -- uv run --directory /path/to/xer-mixa-mcp python -m xer_mixa_mcp.server

Env var

Default

Must match on the Mixa

XER_MIXA_MIDI_PORT

disting NT

(port name substring)

XER_MIXA_CHANNEL

16

Config > MIDI > Chan In

XER_MIXA_CC_BASE

21

Config > MIDI > CC# Base

Related MCP server: X32/M32 MCP Server

Tools

mixer_info, configure, set_channel (volume, mute, pan, sends), mute / unmute (channels, lists, inputs, returns, all), set_output_level (needs Bus CC = On), load_scene (A-G), send_cc, select_bus_state, port_status, connect_port, release_port, start_midi_capture, get_captured_midi.

The Mixa acknowledges nothing. If a call reports sent but nothing changes, open Config > MIDI > Log on the Mixa to see what arrives.

Not affiliated with Noise Engineering, Expert Sleepers or Make Noise.

MIT

Tool Schema Changelog

Recent tool additions, removals, and schema changes observed during successful MCP inspections.

Loading tool schema changelog…

    Related MCP Connectors

    Related MCP Servers