add_rib
Adds a straight stiffening rib or gusset in a plane parallel to the Front plane, growing toward a specified part side until it meets the geometry.
Instructions
Add a straight stiffening rib / gusset in a plane parallel to the Front plane.
start_mm/end_mm = [x, y] ends of the rib's free edge (add_extruded_profile coordinates); the plane sits at height z_mm. The rib grows toward toward_mm (any [x, y] point on the side to fill, e.g. the inner corner of an L-bracket) until it meets the part, thickness_mm thick, centred on the plane. Returns mass properties: a triangular gusset with legs a and b adds a*b/2 * thickness.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"start_mm": "<start_mm>",
"end_mm": "<end_mm>",
"toward_mm": "<toward_mm>",
"thickness_mm": "<thickness_mm>",
"z_mm": "<z_mm>"
},
"name": "add_rib"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| name | No | Rib | |
| z_mm | Yes | ||
| end_mm | Yes | ||
| start_mm | Yes | ||
| toward_mm | Yes | ||
| thickness_mm | Yes |