本服务器只修改已经打开的 Creo，经 CREOSON 完成。CREOSON 不能草图、拉伸、打孔或圆角；新建几何用 extrude/revolve/hole/round 等建模工具。尺寸值用模型单位。工具不假定尺寸名，也不假定某次会话里的数值或包围盒。feature/list 只列可见特征，不能据此判断没有实体。除非 action 是 save，否则不会 file/save。破坏性 action 必须带精确 confirm。选择器为空或全匹配时，普通令牌不够，要对应的 ALL_* 令牌。feature/suppress 与 resume 省略 with_children 时，处理器默认 true，会连带子特征。layer/show 不会删除层。interface/export_image 的 height 和 width 在一次观察里按英寸起作用，不是像素。

set/set_text take a list (values/texts) and run one dimension/set per item in order, then regenerate each file once when regenerate is true (default true for set/set_text). A failing item stops the batch and nothing is regenerated.

Actions:

• set: Set a dimension value

• set_text: Set dimension text

• copy: Copy dimension to another in the same model or another model

• show: Display or hide a dimension in Creo

本服务器只修改已经打开的 Creo，经 CREOSON 完成。CREOSON 不能草图、拉伸、打孔或圆角；新建几何用 extrude/revolve/hole/round 等建模工具。尺寸值用模型单位。工具不假定尺寸名，也不假定某次会话里的数值或包围盒。feature/list 只列可见特征，不能据此判断没有实体。除非 action 是 save，否则不会 file/save。破坏性 action 必须带精确 confirm。选择器为空或全匹配时，普通令牌不够，要对应的 ALL_* 令牌。feature/suppress 与 resume 省略 with_children 时，处理器默认 true，会连带子特征。layer/show 不会删除层。interface/export_image 的 height 和 width 在一次观察里按英寸起作用，不是像素。

Write a model to disk without changing it. file = interface/export_file (type e.g. STEP, IGES, STL, VRML; dirname optional), pdf, 3dpdf, image (height/width act as inches, use about 4 x 6 at dpi 100), plot. Actions:

• file: Export a model to a file

• pdf: Export a model to a PDF file

• 3dpdf: Export a model to a 3D PDF file

• image: Export a model to an image file

• plot: Export a model plot

本服务器只修改已经打开的 Creo，经 CREOSON 完成。CREOSON 不能草图、拉伸、打孔或圆角；新建几何用 extrude/revolve/hole/round 等建模工具。尺寸值用模型单位。工具不假定尺寸名，也不假定某次会话里的数值或包围盒。feature/list 只列可见特征，不能据此判断没有实体。除非 action 是 save，否则不会 file/save。破坏性 action 必须带精确 confirm。选择器为空或全匹配时，普通令牌不够，要对应的 ALL_* 令牌。feature/suppress 与 resume 省略 with_children 时，处理器默认 true，会连带子特征。layer/show 不会删除层。interface/export_image 的 height 和 width 在一次观察里按英寸起作用，不是像素。

Get a list of dimensions from a model. select=true clears the current Creo selection.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Create a new empty mm model in dir and open it in its own window. kind=part (default, template mmns_part_solid, datums RIGHT/TOP/FRONT/PRT_CSYS_DEF) or kind=asm (template mmns_asm_design). Put parts into an assembly with model_edit action=assemble (file=<part.prt>, into_asm=<name.asm>); without constraints the part is placed at the assembly origin.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Open an existing dir/name.prt or name.asm (kind=asm), newest version, in its own window.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Save the model to dir (Creo writes name.prt.N). If dir is the folder the model came from it is a real save (method=save, modified=false); otherwise a copy is written there (method=backup) and the open model stays modified. Never uploads to Windchill.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Erase the model from the Creo session. A model with unsaved changes is refused (unsaved_changes) unless confirm=DISCARD_CHANGES. Only close models you created in this conversation or the user named.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Features (id, name, type, status 0=active, dims, axes), bound_box and volume of a part.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Sketched extrude, adds material or cuts (cut=true). depth_type: blind (needs depth), symmetric (needs depth, split on both sides), through_all. flip=true reverses the blind side. Sketch on plane (any planar datum or face ref); orient_ref is chosen automatically. Sketch path, commands separated by ';'. Recommended: coords=model, then every point is 'x y z' in model coordinates (mm) and is projected onto the sketch plane, so it works the same on any plane. Commands (p = point): 'M p' start a loop; 'L p' line to; 'A3 p m' arc to p passing through m; 'A p c ccw|cw' arc to p around centre c; 'Z' close the loop; 'C c r' circle; 'CL p q' centerline (revolve axis). Example coords=model on FRONT: 'M -50 -25 0; L 50 -25 0; L 50 25 0; L -50 25 0; Z'. Default coords=sketch (1.0): points are 'x y' in the sketch frame (on FRONT = model X, Y; on other planes see sec_location in the result). Solid features need closed loops; open loops and a revolve without exactly one CL are rejected before Creo is called.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Sketched revolve, adds material or cuts (cut=true). The sketch needs exactly one centerline 'CL ...' as the axis, and the profile on one side of it. angle in degrees (default 360); symmetric=true splits the angle across the sketch plane. Example (cylinder r20 h40 around Y on FRONT): 'CL 0 0 0 1; M 0 0; L 20 0; L 20 40; L 0 40; Z'. Sketch path, commands separated by ';'. Recommended: coords=model, then every point is 'x y z' in model coordinates (mm) and is projected onto the sketch plane, so it works the same on any plane. Commands (p = point): 'M p' start a loop; 'L p' line to; 'A3 p m' arc to p passing through m; 'A p c ccw|cw' arc to p around centre c; 'Z' close the loop; 'C c r' circle; 'CL p q' centerline (revolve axis). Example coords=model on FRONT: 'M -50 -25 0; L 50 -25 0; L 50 25 0; L -50 25 0; Z'. Default coords=sketch (1.0): points are 'x y' in the sketch frame (on FRONT = model X, Y; on other planes see sec_location in the result). Solid features need closed loops; open loops and a revolve without exactly one CL are rejected before Creo is called.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Sketched datum curve on a plane, open or closed (no material). Use it as a sweep trajectory by its feature_name. Example path on FRONT: 'M 0 0; L 0 60; A 20 80 20 60 cw; L 60 80'. Sketch path, commands separated by ';'. Recommended: coords=model, then every point is 'x y z' in model coordinates (mm) and is projected onto the sketch plane, so it works the same on any plane. Commands (p = point): 'M p' start a loop; 'L p' line to; 'A3 p m' arc to p passing through m; 'A p c ccw|cw' arc to p around centre c; 'Z' close the loop; 'C c r' circle; 'CL p q' centerline (revolve axis). Example coords=model on FRONT: 'M -50 -25 0; L 50 -25 0; L 50 25 0; L -50 25 0; Z'. Default coords=sketch (1.0): points are 'x y' in the sketch frame (on FRONT = model X, Y; on other planes see sec_location in the result). Solid features need closed loops; open loops and a revolve without exactly one CL are rejected before Creo is called.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Constant-section sweep along a trajectory: the feature_name of a sketch_curve, or a list of edge:N joined end to end. The section sketch is drawn in the frame at the trajectory start, origin = start point (e.g. 'C 0 0 5' for a 10 mm pipe). cut=true removes material. Uses the same sketch commands as extrude.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Datum plane. mode=offset: parallel to ref at offset mm (negative = other side). mode=angle: through axis/straight edge 'thru', at angle degrees to plane 'ref'. Returns its surface id; sketch on it by feature name.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Straight hole. placement=linear: on planar face/datum 'face', at dist1 from ref1 and dist2 from ref2 (planes or edges). placement=coax: along axis 'axis', starting at plane 'face'. depth_type: through_all (default), through_next, blind (needs depth). Holes drill one side of the placement plane: flip=true drills the other side, both_sides=true drills both. If volume did not change, the hole went into empty space: retry with flip=true.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Constant-radius round on the listed edges (edge:N ids from find_geometry kind=edges). List every edge to round, or pass tangent_chain=true to add every edge joined to them with the same tangent (a full circle is two arcs in Creo: rounding one half alone fails).

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Equal-distance (D x D) chamfer on the listed edges (edge:N from find_geometry kind=edges).

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Hollow the part with wall thickness. remove = faces to open (surface:N, e.g. the top face from find_geometry normal=+y); without remove the part becomes a closed hollow body. outside=true grows the wall outward instead of inward.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Undo the last modelling step: deletes the newest feature (or the whole pattern if the newest feature is a pattern member). Template datums are never removed. Requires confirm=UNDO.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Pattern an existing feature. count = total instances including the original. type=axis: around 'axis', angle degrees between instances (default 360/count). type=direction: along the normal of plane 'ref' (or a straight edge), spacing mm; flip=true goes the other way. Instances outside the part change nothing: compare volume before/after.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Find faces or edges to reference. kind=faces: filter by feature, face_type (plane, cylinder, cone, torus, revolved, fillet), normal (outward, planes: +x,-x,+y,-y,+z,-z). kind=edges: filter by feature, of (edges bounding surface:N), edge_type (line, arc, circle). sort by max_x/min_x/max_y/min_y/max_z/min_z/max_size/min_size; limit (default 20). near=[x,y,z] sorts by distance to that model point and returns distance (e.g. the face nearest a point you know). Returns refs with centre, normal or end points, size.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Minimum distance between a and b, each a ref (surface:N, edge:N, axis:N, datum name) or a model point [x,y,z]. Returns distance, the two closest points, and the angle (deg) when both are planes or straight lines. Use it to check a result.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Temporarily hide features (ids or names) without deleting them; children are suppressed too unless with_children=false. Undo with feature_resume.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Bring back suppressed features (ids or names); their parents are resumed too unless with_parents=false.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Advanced. Return a feature's element tree as Creo XML (the full definition: type, values, references as PRO_XML_REFERENCE_ID). Read it to learn how a user-made feature is defined, edit values or reference ids, and rebuild it with feature_xml_create. Sketches are not included in the XML.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Advanced. Create a feature from element tree XML (as returned by feature_xml_export, edited). Works for features without sketches (round, chamfer, hole, shell, draft, datum, pattern...). Reference ids must exist in this model (find_geometry). Failed features are rolled back.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Delete one feature by id (from model_info). Children may fail. Requires confirm=DELETE_FEATURE.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Turn the model's Creo window to a standard view and refit it (no image). Views: front looks along -Z (model XY plane), top looks down -Y, right looks along -X, iso is the Creo default 3D orientation. An unknown view name is an error listing the saved views.

Creates/edits geometry in the running Creo 5 through the DreamFeatureApp plugin. There is no mirror tool: build symmetric shapes with symmetric extrudes, revolves or patterns. Units are mm and degrees. Parts are addressed by name (lowercase, no .prt). Model axes: FRONT is the XY plane (normal +Z), TOP is XZ (normal +Y), RIGHT is YZ (normal +X). Each feature call either ends with an active feature or is rolled back. Nothing is saved unless model_save is called. Check results with model_info (volume, bound_box) and preview_image.

Render the model's window to a JPEG and return it as an image (about 3 s). Optional view turns the window first. fit (default true) refits the model; datums=true shows datum planes and axes (hidden by default for a clean picture). width/height in inches at 100 dpi (default 6 x 4). Views: front looks along -Z (model XY plane), top looks down -Y, right looks along -X, iso is the Creo default 3D orientation. An unknown view name is an error listing the saved views.