check_loop_impedance
Calculate the maximum AC earth-fault loop length using conductor resistance/reactance and protective device rating, then compare a route length for pass/fail.
Instructions
Estimate an AC earth-fault loop length limit using resistance plus reactance.
nominal_phase_voltage is phase-to-earth voltage. The external source-loop magnitude
defaults to zero and must be supplied for a realistic check. length_m enables the
route-length pass/fail comparison; without it no route check is performed. Material
is specified separately for active and earth conductors. Generic B/C/D trip
multipliers do not verify a specific device's clearing time or guarantee disconnection.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"active_size_mm2": "<active_size_mm2>",
"earth_size_mm2": "<earth_size_mm2>",
"protective_device_rating_amps": "<protective_device_rating_amps>"
},
"name": "check_loop_impedance"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| length_m | No | ||
| mcb_curve | No | C | |
| insulation | No | V90 | |
| earth_size_mm2 | Yes | ||
| active_size_mm2 | Yes | ||
| conductor_material | No | copper | |
| nominal_phase_voltage | No | ||
| earth_conductor_material | No | copper | |
| supply_loop_impedance_ohm | No | ||
| protective_device_rating_amps | Yes |
Output Schema
| Name | Required | Description | Default |
|---|---|---|---|
No arguments | |||