multisim-unified-mcp
Connects to a local NI Multisim installation to edit and save native .ms14 schematics, place components and wires, run F5 interactive digital simulations, and perform COM-based DC, AC, and transient analyses on saved projects.
This server does not currently have a deployable release on Glama. Follow the repository's setup instructions to install and configure it for your MCP client, including any required credentials and local dependencies.
multisim-mcp
简体中文 · English
一个非官方的 NI Multisim 本地 MCP 集成。让 AI 助手搭建和修改原理图、操控交互仿真,并用 Multisim 实测结果核对电路。
能做什么
画图并检查原理图。 从 Multisim 主数据库查找指定型号,放置元件、接线并保存为可编辑的
.ms14。用原生网表检查电气连接,再单独检查图面碰撞,必要时导出电路图。自动核对数字电路。 运行 Multisim 的交互仿真(手动启动的快捷键是 F5),逐组拨动开关,在指定仿真时间后读取实际灯态并对照真值表,最后恢复开关原位。
测电压、看波形。 优先用 Native 后端运行直流工作点、瞬态或交流分析并读取结果。需要 COM 专用能力、跨后端复核或明确要求用 COM 时,可以把当前工程保存后交给 COM,网关会核对两个后端操作的是同一份文件。
Related MCP server: uSimmics MCP Bridge
兼容性与限制
实机支持 64 位 Windows 上的 32 位 NI Multisim
14.3.3.0,其中multisim.exe的文件版本为14.3.1500.0。安装器检查文件版本,Native 运行前校验关键模块的指纹。补丁和发行版的验证范围见兼容性矩阵。自动拨开关和读灯支持
INTERACTIVE_DIGITAL_CONSTANT与PROBE_DIG_RED。真值表工具按固定仿真时间采样,时序特性需单独验证。COM 数值分析通过 Windows 自动化接口执行。保存用例的逻辑判定适用于输入保持固定的组合电路。Native 和 COM 各自在独立进程中运行,通过一个 stdio MCP 入口接入。
文档与上游
在 PowerShell 中运行 ./install.ps1,再将生成的 stdio 配置添加到 MCP 客户端。QUICKSTART.md包含安装条件、诊断和验证步骤。AGENTS.md说明如何检查电路和保护原工程。
Multisim Native MCP v0.5.2 提供原生编辑、检查和仿真。Multisim MCP v1.3.1 提供 COM 数值分析。本项目增加了交互仿真的逐行真值表判定,以及同一文件的工程交接。
许可证
Tool Schema Changelog
Recent tool additions, removals, and schema changes observed during successful MCP inspections.
Loading tool schema changelog…
This server cannot be deployed
Maintenance
Related MCP Connectors
Cloud PLC simulator: validate and step-run LAD/SCL programs, run scenarios, return PASS/FAIL.
Manage SysML2 projects; check, evaluate, verify, query, document and diagram models.
Design and revise PCBs from plain language, track jobs, and retrieve design artifacts.
Build, check and open Arduino, ESP32 and Pico circuits with code in the Mokxi simulator.
Related MCP Servers
- AlicenseBqualityBmaintenanceEnables any local stdio MCP client to read and edit MAX+plus II projects, GDF schematics, SYM symbols and SCF waveforms, run the vendor's native compilation and simulation, and drive MAX+plus II's Windows user interface through Win32 and UI Automation.684MIT
- AlicenseAqualityBmaintenanceEnables building, saving, inspecting, and previewing supported circuits, plus running headless harmonic-balance simulations and comparing parameter variants without using the desktop UI.21MIT
- AlicenseNot gradedqualityBmaintenanceA stdio MCP server that exposes tools to generate editable NI Multisim 14 circuits from JSON specs, self-check wiring offline, run real simulations, preview schematics, and capture instrument panels. It shells out to isolated CLI processes so COM crashes do not take down the server.2MIT
- AlicenseNot gradedqualityBmaintenanceEnables native editing of NI Multisim circuits and analog analysis through 44 tools covering components, wires, sheets, subcircuits, and SPICE models. Supports editable .ms14 projects with named-pin connections, batch edits, undo/redo, DC operating point and transient analysis, and schematic export to PNG, BMP, RAW, and CSV.3MIT