Delete files from Bambu Lab printer SD card in cache, timelapse, or logs directories. Requires explicit confirmation for security.
GPL 2.0
180,147 tools. Last updated 2026-06-04 11:33
"Bambu Lab" matching MCP tools:
- Delete files from a Bambu Lab printer's SD card (cache/, timelapse/, logs/ directories). Requires confirmation to prevent accidental deletion.GPL 2.0
- Establish a secure MQTT connection to a Bambu Lab 3D printer for local control and monitoring. Required before sending printer commands.MIT
- Pause an active print job on a Bambu Lab printer, allowing resumption later with a dedicated command.GPL 2.0
- Pause an active 3D print job on a Bambu Lab printer. The print can be resumed later using the resume command.GPL 2.0
- Initiates printing of a G-code file stored on a Bambu Lab printer. Requires the printer model to select the correct start G-code.GPL 2.0
Matching MCP Servers
- AlicenseAqualityCmaintenanceEnables comprehensive control and monitoring of Bambu Lab 3D printers through Claude using local MQTT, FTPS, and X.509 authentication. Users can manage print jobs, monitor real-time status, handle filament through AMS, and adjust hardware settings like temperature and lighting.Last updated2415MIT
- AlicenseBqualityBmaintenanceAn MCP server for controlling Bambu Lab 3D printers that enables users to manipulate STL files, slice 3MF files, and manage end-to-end print workflows directly from Claude. It provides real-time status monitoring, file management via FTPS, and printer control through MQTT for a focused, lean Bambu-only implementation.Last updated4129848GPL 2.0
Matching MCP Connectors
Interpret lab values against ACLM-optimized ranges. Returns deprescription signals.
MCP server providing AI security tools: prompt injection detection, PII scanning, and RAG input validation. Works with Claude, Cursor, and any MCP-compatible client.
- Sign messages with X.509 certificates to authenticate communication with Bambu Lab 3D printers, enabling secure printer control and bypassing firmware authentication restrictions.MIT
- Print a 3MF file on a Bambu Lab printer. Auto-slices if the file lacks gcode; specify printer model for safe operation.GPL 2.0
- Clear HMS or print error states on Bambu Lab printers using the MQTT clean_print_error command.GPL 2.0
- Resume a paused print job on a Bambu Lab 3D printer by providing the printer's host, serial, and access token.GPL 2.0
- Control the chamber light of Bambu Lab 3D printers by setting its mode to on, off, or flashing via MQTT commands.GPL 2.0
- Cancel the active print job on your Bambu Lab 3D printer, stopping the print and resetting the printer to idle.GPL 2.0
- Resume a paused print job on your Bambu Lab 3D printer.GPL 2.0
- Retrieve real-time status of a Bambu Lab 3D printer, including operational state and print progress.GPL 2.0
- Clear print errors and HMS warnings on a Bambu Lab printer by sending the clean_print_error MQTT command.GPL 2.0
- Upload G-code files to a Bambu Lab printer by providing file content or a local file path.GPL 2.0
- Control the speed of a specific fan on a Bambu Lab 3D printer. Set part, auxiliary, or chamber fan speed from 0 to 100 percent via MQTT.GPL 2.0
- Send a 3MF file to a Bambu Lab printer for printing. Auto-slices unsliced files and requires specifying the printer model to prevent damage.GPL 2.0
- Cancel the ongoing print job on your Bambu Lab printer to stop printing immediately.GPL 2.0
- Start printing a G-code file already stored on a Bambu Lab 3D printer. Specify the filename and printer model.GPL 2.0