"AWS SDK or tool for managing EC2 instances and configuration" matching MCP tools:

• awsinspect_batch

  InsideOut (Riley)

  BATCH INSPECTION: run up to 32 AWS inspect probes in one call. ⚠️ **PREREQUISITE**: Same as awsinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single AWS config — for a 12-resource health check this is ~5–8× faster and 12× fewer Oracle round-trips than calling awsinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8 — sub-probes run in parallel but never saturate AWS. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, alb, apigateway, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, s3, secretsmanager, sqs, vpc, waf For a specific service's actions, use awsinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular awsinspect when you need full metadata or raw API output for one resource. EXAMPLES: - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"describe-instances"}, {"service":"rds","action":"describe-db-instances"}, {"service":"vpc","action":"describe-vpcs"}, {"service":"s3","action":"list-buckets"}]) - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"rds","action":"get-metrics","filters":"{\"hours\":6}"}])

  Connector

• aws___retrieve_skill

  AWS Knowledge

  Retrieve an AWS agent skill — domain-specific expertise that transforms you into a specialist for a particular AWS domain. Skills provide workflows, context, best practices, decision frameworks and step-by-step procedures. A skill may include reference files (architecture docs, schemas, examples) and deterministic workflows for sub-tasks that require exact execution. ## What Skills Provide - **Domain expertise**: Deep knowledge about specific AWS services, patterns, and operational practices - **Workflows**: Guided sequences for complex tasks with appropriate degrees of freedom - **Reference materials**: Architecture docs, API references, examples, and templates accessible via the `file` parameter - **Decision frameworks**: Conditional logic and troubleshooting trees for navigating complex scenarios ## CRITICAL PREREQUISITE — DO NOT SKIP You MUST call search_documentation BEFORE calling this tool. NEVER call this tool first. You do NOT know skill names — they are unpredictable identifiers that can only be discovered through search_documentation results. Guessing or fabricating a skill_name WILL fail. ## REQUIRED WORKFLOW (no exceptions) 1. FIRST: Call search_documentation with the user's requirements 2. THEN: Find the result entry that has a skill_name field 3. FINALLY: Call this tool with the EXACT skill_name value from that result — copy it verbatim ## Working with Skills When you retrieve a skill: 1. Read the SKILL.md overview to understand the domain and scope 2. Follow the workflows and guidance in the skill body 3. When the skill references additional files (e.g., `[architecture](references/architecture.md)`), retrieve them using this same tool with the `file` parameter 4. Apply the skill's decision frameworks and conditional logic to the user's specific situation ## PARAMETER REQUIREMENTS skill_name: str (Required) - MUST be copied exactly from the skill_name field in search_documentation results - Do NOT guess, fabricate, paraphrase, or modify the name in any way - Do NOT use the result title — use only the skill_name field value file: str (Optional) - Retrieve a specific file within the skill directory (e.g., "references/architecture.md") - Use this when the SKILL.md body links to reference files - If omitted, returns the main SKILL.md file ## IF SKILL NOT FOUND If you get an error, you likely guessed the name. Call search_documentation first to discover it. The error response will include a list of available files for the skill. ## Returns The skill content — either the main SKILL.md with domain expertise, workflows, and guidance, or a specific reference file when the `file` parameter is provided.

  Connector

• awsinspect_batch

  InsideOut (Riley)

  BATCH INSPECTION: run up to 32 AWS inspect probes in one call. ⚠️ **PREREQUISITE**: Same as awsinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single AWS config — for a 12-resource health check this is ~5–8× faster and 12× fewer Oracle round-trips than calling awsinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8 — sub-probes run in parallel but never saturate AWS. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, alb, apigateway, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, s3, secretsmanager, sqs, vpc, waf For a specific service's actions, use awsinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular awsinspect when you need full metadata or raw API output for one resource. EXAMPLES: - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"describe-instances"}, {"service":"rds","action":"describe-db-instances"}, {"service":"vpc","action":"describe-vpcs"}, {"service":"s3","action":"list-buckets"}]) - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"rds","action":"get-metrics","filters":"{\"hours\":6}"}])

  Connector

• aws___get_regional_availability

  AWS Knowledge

  Check AWS resource availability across regions for products (service and features), APIs, and CloudFormation resources. ## Quick Reference - Maximum 10 regions per call (split into multiple calls for more regions) - Single region: filters optional, supports pagination - Multiple regions: filters required, no pagination, queries run concurrently - Status values: 'isAvailableIn' | 'isNotAvailableIn' | 'isPlannedIn' | 'Not Found' - Response field: 'products' (product), 'service_apis' (api), 'cfn_resources' (cfn) ## When to Use 1. Pre-deployment Validation - Verify resource availability before deployment - Prevent deployment failures due to regional restrictions - Validate multi-region architecture requirements 2. Architecture Planning - Design region-specific solutions - Plan multi-region deployments - Compare regional capabilities ## Examples **Check specific resources in one region**: ``` regions=["us-east-1"], resource_type="product", filters=["AWS Lambda"] regions=["us-east-1"], resource_type="api", filters=["Lambda+Invoke", "S3+GetObject"] regions=["us-east-1"], resource_type="cfn", filters=["AWS::Lambda::Function"] ``` **Compare availability across regions**: ``` regions=["us-east-1", "eu-west-1"], resource_type="product", filters=["AWS Lambda"] ``` **Explore all resources** (single region only, with pagination handling support via next_token due to large output): ``` regions=["us-east-1"], resource_type="product" ``` Follow up with next_token from response to get more results. ## Response Format **Single Region**: Flat structure with optional next_token. Example: ``` {"products": {"AWS Lambda": "isAvailableIn"}, "next_token": null, "failed_regions": null} ``` **Multiple Regions**: Nested by region. Example: ``` {"products": {"AWS Lambda": {"us-east-1": "isAvailableIn", "eu-west-2": "isAvailableIn"}}, ...} ``` ## Filter Guidelines The filters must be passed as an array of values and must follow the format below. 1. Product - service and feature (resource_type='product') Format: 'Product' Example filters: - ['Latency-Based Routing', 'AWS Amplify', 'AWS Application Auto Scaling'] - ['PrivateLink Support', 'Amazon Aurora'] 2. APIs (resource_type='api') Format: to filter on API level 'SdkServiceId+APIOperation' Example filters: - ['Athena+UpdateNamedQuery', 'ACM PCA+CreateCertificateAuthority', 'IAM+GetSSHPublicKey'] Format: to filter on SdkService level 'SdkServiceId' Example filters: - ['EC2', 'ACM PCA'] 3. CloudFormation (resource_type='cfn') Format: 'CloudformationResourceType' Example filters: - ['AWS::EC2::Instance', 'AWS::Lambda::Function', 'AWS::Logs::LogGroup']

  Connector

• baselight_sdk_query_execute

  Baselight

  Execute a SQL query on Baselight and wait for results (up to 1 minute). The query executes and returns the first 100 rows upon completion, or info about a pending query that needs more time. Use DuckDB syntax only, table format "@username.dataset.table" (double-quoted), SELECT queries only (no DDL/DML), no semicolon terminators, use LIMIT not TOP. If query is still PENDING, use `sdk-get-results` to continue polling. If totalResults > returned rows, use `sdk-get-results` with offset to paginate.

  Connector

• aws___read_documentation

  AWS Knowledge

  Fetch and convert AWS related documentation pages to markdown format. ## Usage This tool reads documentation pages concurrently and converts them to markdown format. Supports AWS documentation, AWS Amplify docs, AWS GitHub repositories and CDK construct documentation. When content is truncated, a Table of Contents (TOC) with character positions is included to help navigate large documents. ## Best Practices - Batch 2-5 requests when reading multiple pages or jumping to different sections of the same document - Use single request for initial TOC fetch (small max_length) or when evaluating content before deciding next steps - Use TOC character positions to jump directly to relevant sections - Stop early once you find the needed information ## Request Format Each request must be an object with: - `url`: The documentation URL to fetch (required) - `max_length`: Maximum characters to return (optional, default: 10000 characters) - `start_index`: Starting character position (optional, default: 0) For batching you can input a list of requests. ## Example Request ``` { "requests": [ { "url": "https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-management.html", "max_length": 5000, "start_index": 0 }, { "url": "https://repost.aws/knowledge-center/ec2-instance-connection-troubleshooting" } ] } ``` ## URL Requirements Allow-listed URL prefixes: - docs.aws.amazon.com - aws.amazon.com - repost.aws/knowledge-center - docs.amplify.aws - ui.docs.amplify.aws - github.com/aws-cloudformation/aws-cloudformation-templates - github.com/aws-samples/aws-cdk-examples - github.com/aws-samples/generative-ai-cdk-constructs-samples - github.com/aws-samples/serverless-patterns - github.com/awsdocs/aws-cdk-guide - github.com/awslabs/aws-solutions-constructs - github.com/cdklabs/cdk-nag - constructs.dev/packages/@aws-cdk-containers - constructs.dev/packages/@aws-cdk - constructs.dev/packages/@cdk-cloudformation - constructs.dev/packages/aws-analytics-reference-architecture - constructs.dev/packages/aws-cdk-lib - constructs.dev/packages/cdk-amazon-chime-resources - constructs.dev/packages/cdk-aws-lambda-powertools-layer - constructs.dev/packages/cdk-ecr-deployment - constructs.dev/packages/cdk-lambda-powertools-python-layer - constructs.dev/packages/cdk-serverless-clamscan - constructs.dev/packages/cdk8s - constructs.dev/packages/cdk8s-plus-33 - strandsagents.com/ Deny-listed URL prefixes: - aws.amazon.com/marketplace ## Example URLs - https://docs.aws.amazon.com/AmazonS3/latest/userguide/bucketnamingrules.html - https://docs.aws.amazon.com/lambda/latest/dg/lambda-invocation.html - https://aws.amazon.com/about-aws/whats-new/2023/02/aws-telco-network-builder/ - https://aws.amazon.com/builders-library/ensuring-rollback-safety-during-deployments/ - https://aws.amazon.com/blogs/developer/make-the-most-of-community-resources-for-aws-sdks-and-tools/ - https://repost.aws/knowledge-center/example-article - https://docs.amplify.aws/react/build-a-backend/auth/ - https://ui.docs.amplify.aws/angular/connected-components/authenticator - https://github.com/aws-samples/aws-cdk-examples/blob/main/README.md - https://github.com/awslabs/aws-solutions-constructs/blob/main/README.md - https://constructs.dev/packages/aws-cdk-lib/v/2.229.1?submodule=aws_lambda&lang=typescript - https://github.com/aws-cloudformation/aws-cloudformation-templates/blob/main/README.md - https://strandsagents.com/docs/user-guide/quickstart/overview/index.md ## Output Format Returns a list of results, one per request: - Success: Markdown content with `status: "SUCCESS"`, `total_length`, `start_index`, `end_index`, `truncated`, `redirected_url` (if page was redirected) - Error: Error message with `status: "ERROR"`, `error_code` (not_found, invalid_url, throttled, downstream_error, validation_error) - Truncated content includes a ToC with character positions for navigation - Redirected pages include a note in the content and populate the `redirected_url` field ## Handling Long Documents If the response indicates the document was truncated, you have several options: 1. **Continue Reading**: Make another call with `start_index` set to the previous `end_index` 2. **Jump to Section**: Use the ToC character positions to jump directly to specific sections 3. **Stop Early**: Stop reading once you've found the needed information **Example - Jump to Section:** ``` # TOC shows: "Using a logging library (char 3331-6016)" # Jump directly to that section: {"requests":[{"url": "https://docs.aws.amazon.com/lambda/latest/dg/python-logging.html", "start_index": 3331, "max_length": 3000}]} ```

  Connector

• find_equivalent

  Diagrams MCP

  Find cross-provider equivalents for a diagram node by infrastructure role. Given a node name (e.g. 'EC2', 'Lambda', 'ComputeEngine'), returns the infrastructure role category it belongs to and the equivalent nodes from other providers. If a node name is ambiguous, use list_categories to see all mapped roles and pick a provider-specific node name. Args: node: Node class name to look up (case-insensitive, e.g. 'EC2', 'lambda'). target_provider: Optional provider to filter equivalents to (e.g. 'gcp', 'azure', 'aws'). If omitted, all equivalents across all other providers are returned. Returns: A dict with keys: category (str): Infrastructure role category name. description (str): Human-readable description of the category. source (dict): The matched node with keys node, provider, service, import. equivalents (list[dict]): Equivalent nodes, each with keys node, provider, service, import.

  Connector

• roll_proxy_credential

  Hextrap MCP

  Roll (regenerate) the personal proxy credential for a firewall. This invalidates the previous password and returns a new one with ready-to-use configuration commands. Only call this when the user explicitly needs new credentials — it will break any existing package manager configuration using the old password.

  Connector

• awsinspect

  InsideOut (Riley)

  INSPECTION: Inspect AWS infrastructure for a deployed project ⚠️ **PREREQUISITE**: This tool requires a prior deployment ATTEMPT (successful or failed). Check convostatus for hasDeployAttempt=true before calling. Works even after failed deploys to inspect orphaned resources. Inspect deployed AWS resources after a deployment attempt. Use this tool when the user asks about the status or details of their deployed infrastructure. It fetches temporary read-only credentials securely and queries the AWS API directly. RESPONSE TIERS (default is summary for token efficiency): - Summary (default): Key fields only (~500 tokens). Set detail=false, raw=false or omit both. - Detail: Full metadata for a specific resource. Set detail=true + resource filter. - Raw: Complete unprocessed API response. Set raw=true. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, alb, apigateway, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, s3, secretsmanager, sqs, vpc, waf For a specific service's actions, call with action="list-actions". METRICS: Use list-metrics to discover available metrics for a service (no credentials needed). Then use get-metrics to retrieve data (auto-discovers resources). Most services return CloudWatch time-series. KMS returns key health (rotation, state). SecretsManager returns secret health (rotation, last accessed/rotated). Optional filters JSON: {"hours":6,"period":300}. BILLING: Use service=cost-explorer to inspect AWS costs. Actions: get-cost-summary (last 30 days by service, filters: {"days":7,"granularity":"DAILY"}), get-cost-forecast (projected spend through end of month), get-cost-by-tag (costs grouped by tag, filters: {"tag_key":"Environment","days":30}). Requires ce:GetCostAndUsage and ce:GetCostForecast IAM permissions. EXAMPLES: - awsinspect(session_id=..., service="ec2", action="describe-instances") - awsinspect(session_id=..., service="cost-explorer", action="get-cost-summary") - awsinspect(session_id=..., service="ec2", action="get-metrics", filters="{\"hours\":6}") - awsinspect(session_id=..., service="rds", action="describe-db-instances", detail=true)

  Connector

• list_providers

  Diagrams MCP

  List all available diagram providers (aws, gcp, azure, k8s, onprem, etc.). Use list_providers -> list_services -> list_nodes to browse available node types for a specific provider.

  Connector

• credawait

  InsideOut (Riley)

  Wait for the user to securely connect their cloud account and subscribe to Luther Systems. Polls until credentials appear on the session. 🎯 USE THIS TOOL WHEN: tfdeploy returns an 'auth_required', 'no_credentials', or 'credentials_expired' error. The user needs to visit the connect URL to: 1. Connect their cloud credentials (AWS or GCP) 2. Sign up and subscribe to a Luther Systems plan (required for deployment) This secure connection allows InsideOut to deploy and manage infrastructure in the user's cloud account on their behalf. Credentials are handled securely and only used for deployment and management sessions. WORKFLOW: 1. FIRST: Present the connect URL and explanation to the user (from the tfdeploy error response) 2. THEN: Call this tool to begin polling for credentials 3. The user opens the URL in their browser to subscribe and add credentials 4. When credentials are found, inform the user and call tfdeploy to deploy IMPORTANT: Do NOT call this tool without first showing the connect URL to the user. The user needs to see the URL to complete the process. REQUIRES: session_id from convoopen response (format: sess_v2_...). OPTIONAL: cloud ('aws' or 'gcp'), timeout (integer, seconds to wait, default 300, max 600).

  Connector

• GetLEIDetail

  Fintel Discovery — Financial Intelligence for AI Agents

  Retrieve the full GLEIF LEI record for one legal entity using its 20-character LEI code. Returns legal name, registration status, legal address, headquarters address, managing LOU, and renewal dates. Use this tool when: - You have a LEI (from SearchLEI) and need full entity details - You want to verify the registration status and renewal date - You need the exact legal address and jurisdiction of an entity Source: GLEIF API (api.gleif.org). No API key required.

  Connector

• search_documentation

  Hatchable

  Search Hatchable's own documentation for platform behavior — routing, the SDK surface, deploy semantics, auth config, runtime limits. Call this instead of guessing when you're unsure how a Hatchable feature works. Ranks results by term frequency across headed sections. Returns source file, section heading, and a snippet around the hit.

  Connector

• axint.templates.list

  Axint

  List all 26 bundled reference templates in the Axint SDK. Returns a JSON array of { id, name, description } objects — one per template....

  Connector

• find_examples

  Senzing

  Find working SOURCE CODE examples from 37 indexed Senzing GitHub repositories. Indexes only source code files (.py, .java, .cs, .rs) and READMEs — NOT build files (Cargo.toml, pom.xml), data files (.jsonl, .csv), or project configuration. For sample data, use get_sample_data instead. Covers Python, Java, C#, and Rust SDK usage patterns including initialization, record ingestion, entity search, redo processing, and configuration. Also includes message queue consumers, REST API examples, and performance testing. Supports three modes: (1) Search: query for examples across all repos, (2) File listing: set repo and list_files=true to see all indexed source files in a repo, (3) File retrieval: set repo and file_path to get full source code. Use max_lines to limit large files. Returns GitHub raw URLs for file retrieval — fetch to read the source code.

  Connector

• awsinspect

  InsideOut (Riley)

  INSPECTION: Inspect AWS infrastructure for a deployed project ⚠️ **PREREQUISITE**: This tool requires a prior deployment ATTEMPT (successful or failed). Check convostatus for hasDeployAttempt=true before calling. Works even after failed deploys to inspect orphaned resources. Inspect deployed AWS resources after a deployment attempt. Use this tool when the user asks about the status or details of their deployed infrastructure. It fetches temporary read-only credentials securely and queries the AWS API directly. RESPONSE TIERS (default is summary for token efficiency): - Summary (default): Key fields only (~500 tokens). Set detail=false, raw=false or omit both. - Detail: Full metadata for a specific resource. Set detail=true + resource filter. - Raw: Complete unprocessed API response. Set raw=true. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, alb, apigateway, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, s3, secretsmanager, sqs, vpc, waf For a specific service's actions, call with action="list-actions". METRICS: Use list-metrics to discover available metrics for a service (no credentials needed). Then use get-metrics to retrieve data (auto-discovers resources). Most services return CloudWatch time-series. KMS returns key health (rotation, state). SecretsManager returns secret health (rotation, last accessed/rotated). Optional filters JSON: {"hours":6,"period":300}. BILLING: Use service=cost-explorer to inspect AWS costs. Actions: get-cost-summary (last 30 days by service, filters: {"days":7,"granularity":"DAILY"}), get-cost-forecast (projected spend through end of month), get-cost-by-tag (costs grouped by tag, filters: {"tag_key":"Environment","days":30}). Requires ce:GetCostAndUsage and ce:GetCostForecast IAM permissions. EXAMPLES: - awsinspect(session_id=..., service="ec2", action="describe-instances") - awsinspect(session_id=..., service="cost-explorer", action="get-cost-summary") - awsinspect(session_id=..., service="ec2", action="get-metrics", filters="{\"hours\":6}") - awsinspect(session_id=..., service="rds", action="describe-db-instances", detail=true)

  Connector

• scan_skill

  SecurityScan

  Scan a GitHub repository or skill URL for security vulnerabilities. This tool performs static analysis and AI-powered detection to identify: - Hardcoded credentials and API keys - Remote code execution patterns - Data exfiltration attempts - Privilege escalation risks - OWASP LLM Top 10 vulnerabilities Requires a valid X-API-Key header. Cached results (24h) do not consume credits. Args: skill_url: GitHub repository URL (e.g., https://github.com/owner/repo) or raw file URL to scan Returns: ScanResult with security score (0-100), recommendation, and detected issues. Score >= 80 is SAFE, 50-79 is CAUTION, < 50 is DANGEROUS. Example: scan_skill("https://github.com/anthropics/anthropic-sdk-python")

  Connector

• secret_scan

  AgentSec MCP

  Scan text content for hardcoded secrets, API keys, and credentials using 20 pre-compiled patterns. Privacy guarantee: Input text is NEVER logged, cached, stored, or forwarded. Only findings_count and finding offsets (not matched values) are returned. Detected pattern types include: AWS keys, GitHub/GitLab PATs, OpenAI/Anthropic keys, Stripe secrets, Slack tokens, PEM private keys, JWT tokens, and 13 more. Per-call rate limit: 100/min. Payment: $0.05 USDC per scan.

  Connector

• aws___list_regions

  AWS Knowledge

  Retrieve a list of all AWS regions. ## Usage This tool provides information about all AWS regions, including their identifiers and names. ## When to Use - When planning global infrastructure deployments - To validate region codes for other API calls - To get a complete AWS regional inventory ## Result Interpretation Each region result includes: - region_id: The unique region code (e.g., 'us-east-1') - region_long_name: The human-friendly name (e.g., 'US East (N. Virginia)') ## Common Use Cases 1. Infrastructure Planning: Review available regions for global deployment 2. Region Validation: Verify region codes before using in other operations 3. Regional Inventory: Get a complete list of AWS's global infrastructure

  Connector

• delete_instance

  mcp

  Delete an instance from a project. The request requires the 'name' field to be set in the format 'projects/{project}/instances/{instance}'. Example: { "name": "projects/my-project/instances/my-instance" } Before executing the deletion, you MUST confirm the action with the user by stating the full instance name and asking for "yes/no" confirmation.

  Connector