"Telegram login" matching MCP servers:

Enables AI agents to interact with physical embedded target boards over a dual-CDC USB bridge using MCP tools. It exposes console reading, pattern waiting, command sending, reboot/login state machines, and in-RAM MicroPython execution while a single-owner daemon safely arbitrates access to the serial devices.

Enables AI agents to design hardware by writing C-like HDL and compiling it to Verilog, with real toolchain verification including synthesis checks.

Enables MCP clients like Cursor to control logic analyzers, open capture files, decode buses such as Intel 8080, and reconstruct display framebuffers like ST7789.

Enables MCP clients to capture digital waveforms from an ALIENTEK USB logic analyzer, run 208 sigrok protocol decoders with stacked chains (like I2C→SSD1306 or UART→Modbus), and analyze or write .atkdl waveform archives offline without the device attached.

Enables live tag read/write access to Rockwell Automation Logix5000 controllers over EtherNet/IP without requiring Studio 5000 Logix Designer, including discovery, tag listing, and batch operations.

AI-driven USB logic analyzer control via FastMCP. Captures digital traces, decodes UART/I2C/SPI, and exports VCD for PulseView, supporting sigrok hardware and built-in simulator.

Enables AI assistants to control Saleae Logic analyzers, capture and analyze digital/analog signals, and export data via MCP.

Provides serial debugging for embedded Linux targets, enabling boot log capture, automatic login, crash detection, U-Boot interrupt, and hardware reset via MCP protocol.