torch
Shows live per-flow traffic rates on a MikroTik interface for a few seconds, with optional filters to break down traffic by address, protocol, port, VLAN, or DSCP.
Instructions
Shows live traffic rates per flow on an interface for a few seconds (needs the "sniff" policy).
Notes: Each filter both filters and breaks the table down by that field: "0.0.0.0/0" (or "::/0") lists every address, "any" every protocol/port/VLAN/DSCP. With no filter, flows are broken down by IPv4 src/dst address and IP protocol. Torch turns off fasttrack while it runs (higher CPU). RouterOS prints its first frame after two seconds, so a duration under 3 runs for 3.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"interface": "<interface>"
},
"name": "torch"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| dscp | No | ||
| port | No | ||
| device | No | ||
| vlan_id | No | ||
| duration | No | ||
| interface | Yes | ||
| dst_address | No | ||
| ip_protocol | No | ||
| src_address | No | ||
| dst_address6 | No | ||
| mac_protocol | No | ||
| src_address6 | No |
Output Schema
| Name | Required | Description | Default |
|---|---|---|---|
| result | Yes |