WhatsApp Channel for Claude Code

Drive your Claude Code session from WhatsApp. Choose a linked device for a personal account or the official WhatsApp Cloud API for business DMs.

The default Baileys provider connects like WhatsApp Web: pair your phone, then Claude replies from your own number. Existing installations keep this provider. The optional Cloud API provider uses Meta's business API and a public HTTPS webhook, with its own credentials, messaging policies and applicable fees. Both providers feed the same MCP channel and access gate.

Community project. This plugin is not made or endorsed by Anthropic or Meta. Its Baileys provider uses an unofficial linked-device protocol, which may conflict with WhatsApp's terms and put the number at risk. The optional Cloud provider uses official API transport; confirm your use is permitted under Meta's business and AI-provider rules before enabling it.

Installation

claude plugin marketplace add Rich627/whatsapp-claude-plugin
claude plugin install whatsapp-channel@whatsapp-claude-plugin
claude --dangerously-load-development-channels plugin:whatsapp-channel@whatsapp-claude-plugin

The --dangerously-load-development-channels flag matters: it registers the plugin as a channel, so an inbound WhatsApp message wakes your session immediately. Without it the tools still load, but nothing wakes the session when messages arrive — they sit unanswered until you (or a watchdog) prompt Claude to check. --channels does not accept this plugin yet (it is not on the research-preview allowlist), so the development flag is currently the only way.

Know what this flag does. Claude Code warns against loading downloaded channels this way: a loaded channel can put text from other people straight into your session. Read this plugin's code before you use it, keep the allowlist to people you trust, and keep permission prompts on. Never combine it with --dangerously-skip-permissions: with prompts off, anyone in an allowlisted chat could get Claude to run commands on your computer.

Inside the session, choose your connection:

/whatsapp-channel:setup
/whatsapp-channel:configure provider

The wizard runs in your own terminal so Cloud credentials never pass through chat. Or run bun scripts/provider.ts choose from the plugin directory.

For linked-device pairing, save your number with /whatsapp-channel:configure <phone> (country code + number, no +). Enter the printed pairing code in WhatsApp → Settings → Linked Devices → Link a Device → Link with phone number instead, or scan the QR.

For official business DMs, follow Cloud API setup. This provider does not yet support groups, message editing, phone history/address-book import or coexistence synchronization. Add an explicitly allowed personal owner; the business number is never auto-added, and the owner must be set explicitly with /whatsapp-channel:access set owner <jid>. A non-empty key saved in ~/.whatsapp-channel/.env by the terminal tools wins over plugin /config values for that key; remove it from .env to return it to plugin management. Configuration readiness is not proof that the public webhook works. Rates vary; consult Meta pricing and FAQ.

Related MCP server: whatsapp-claude-code

Other MCP clients (Codex CLI, Gemini CLI, Cursor)

The server is a plain stdio MCP server, so any MCP client can run it. Two things are Claude Code specific and worth knowing before you start:

• Inbound messages are not pushed. Waking a session on an incoming message uses notifications/claude/channel, a Claude Code extension. MCP has no standard equivalent that reaches the model, and other clients drop unknown notifications silently. Elsewhere the plugin is poll-based: call wait_for_messages (parks up to 40s; the first call on a connection returns whatever is already unreplied, later calls only what arrived since) or catch_up / unreplied. Most tool results also carry a count of unreplied messages, so a client finds out there is traffic on its next call. Three do not: unreplied and wait_for_messages, which just returned those very messages, and catch_up with no arguments, which is that count already.

• Setup is done from a terminal, not a slash command. /whatsapp-channel:access and friends are Claude Code skills. Use bun scripts/access.ts instead (see Access control from a terminal).

Register the server with an absolute path — ${CLAUDE_PLUGIN_ROOT} is substituted by Claude Code only:

Codex CLI (~/.codex/config.toml)

[mcp_servers.whatsapp]
command = "bun"
args = ["run", "--cwd", "/absolute/path/to/whatsapp-channel", "start"]
startup_timeout_sec = 30   # default 10 is tight for a first Baileys connect
tool_timeout_sec = 120     # default 60; wait_for_messages parks for up to 40s

Gemini CLI (~/.gemini/settings.json)

{
  "mcpServers": {
    "whatsapp": {
      "command": "bun",
      "args": ["run", "--cwd", "/absolute/path/to/whatsapp-channel", "start"],
      "timeout": 600000
    }
  }
}

Cursor (~/.cursor/mcp.json for all projects, .cursor/mcp.json for one)

{
  "mcpServers": {
    "whatsapp": {
      "type": "stdio",
      "command": "bun",
      "args": ["run", "--cwd", "/absolute/path/to/whatsapp-channel", "start"]
    }
  }
}

Only one client at a time can hold a state directory’s singleton lock. With Baileys, two connections using the same linked-device auth would kick each other off. Use separate state directories for separate numbers. A second server does not fail silently — it stays up and serves a single whatsapp_unavailable tool naming the process that holds the connection.

Access control from a terminal

Everything the access skill does, without Claude Code:

bun scripts/access.ts status                 # policy, allowlist, pending codes, groups
bun scripts/access.ts policy pairing         # open the door
bun scripts/access.ts pair <code>            # approve someone who messaged you
bun scripts/access.ts allow <jid>            # add directly
bun scripts/access.ts remove <jid>
bun scripts/access.ts group add <groupJid> [--mention] [--allow jid1,jid2]
bun scripts/access.ts set replyToMode first  # ackReaction, textChunkLimit, chunkMode, mentionPatterns

Approving always needs the specific code, even when only one pairing is waiting: anyone can create a pending entry just by messaging the account, so "approve the pending one" is exactly what a prompt-injected request looks like. For the same reason this is a terminal command and deliberately not an MCP tool, so nothing arriving over WhatsApp can reach it.

Features

The list below describes the default linked-device provider. See the provider capability comparison for the initial Cloud API scope. Shared DM access, attachment processing, transcription and context recovery also work with Cloud API.

• Bidirectional messaging. Send and receive from the session; long replies are chunked to WhatsApp's limits or sent as a document attachment past a configurable threshold.

• @-mentions. reply can tag people so they actually get notified — ids are accepted as phone, LID, or full JID, and mentions attach only to the chunk that names them.

• Full media support. Photos, voice notes, video, documents, and stickers, in both directions.

• Voice transcription. Incoming voice notes are transcribed locally via mlx-whisper (see setup); without the script they arrive as plain attachments.

• Access control. Pairing codes, allowlists, and per-group policies gate every inbound message — strangers never reach your session. Managed via /whatsapp-channel:access in Claude Code, or bun scripts/access.ts anywhere.

• Per-group personalities. Each group gets its own config.md with a custom personality and conversation memory.

• Permission relay. Approve or deny Claude's tool requests from WhatsApp with an emoji reaction (👍 / 👎).

• Cron tasks. A ## Cron Jobs section in a group's config.md schedules recurring server-side tasks.

• Context recovery. After a restart, catch_up with no arguments says how many messages are waiting per chat - counts only, no message text - plus open tasks from tasks.md. Name a chat and it replays that room's recent two-way conversation, so a fresh session resumes mid-flight work without reading every chat it has.

• Dual accounts. Run personal and business numbers side by side with separate state and behaviors.

• Self-diagnosis. /whatsapp-channel:doctor checks the server process, device link, singleton lock, and config, then walks you through the fixes — no more guessing why replies stopped.

How it works

WhatsApp linked device <──Baileys────────> MCP Server <──stdio──> Claude Code
WhatsApp business DMs   <──Cloud API/HTTPS─> MCP Server

The server (a single Bun process) holds either the linked-device connection or the Cloud API webhook listener and forwards inbound messages after they pass the access gate. Claude acts through shared MCP tools such as reply, react, download_attachment, status, unreplied and catch_up. Provider-specific tools include linked-device group/edit operations and Cloud send_template. Runtime state lives in ~/.whatsapp-channel/ (or WHATSAPP_STATE_DIR), never in the repo.

Messages sent by Claude appear from your linked personal number or configured business number. Use a dedicated number if you want a distinct assistant identity.

Voice transcription (optional)

One-time setup (Apple Silicon, mlx-whisper):

brew install ffmpeg                      # mlx-whisper uses it to decode audio
python3 -m venv ~/whisper-env
source ~/whisper-env/bin/activate
pip install mlx-whisper
cp scripts/whisper-transcribe.sh ~/whisper-transcribe.sh
chmod +x ~/whisper-transcribe.sh
~/whisper-transcribe.sh path/to/sample.ogg   # optional: test

The reference script uses mlx-community/whisper-large-v3-turbo — accurate, fast, multilingual. Swap the model in the script if you prefer a smaller one.

Cloud alternative. To skip the local setup, open /plugin, pick this plugin, and set Voice transcription provider to groq or openai along with that provider's API key. Keys are kept in your OS keychain, not in settings.json. Voice notes are then uploaded to api.groq.com or api.openai.com for transcription. The older TRANSCRIPTION_PROVIDER, GROQ_API_KEY and OPENAI_API_KEY environment variables still work.

Troubleshooting

Documentation

Full documentation lives in USAGE.md: access control, the tools exposed to the assistant, dual-account setup, session conflicts, and resetting auth.

Contributing

Issues and pull requests are welcome — read CONTRIBUTING.md before opening one. Report security issues privately per SECURITY.md.

Star History

License

Apache 2.0 — Copyright 2025 Richie Liu