Server Quality Checklist

Tool Scores

• get_maintenance_recommendationsB
  3/5.0
  Behavior3/5

  Does the description disclose side effects, auth requirements, rate limits, or destructive behavior?

  With no annotations, the description must carry the burden of behavioral disclosure. It explains the operation combines service-interval mileage and active anomaly flags and returns prioritized results, which is useful. However, it does not clarify read-only nature, prerequisites (e.g., vehicle must exist), error conditions, or what happens if no anomalies exist, leaving gaps in transparency.

  Agents need to know what a tool does to the world before calling it. Descriptions should go beyond structured annotations to explain consequences.

  Conciseness5/5

  Is the description appropriately sized, front-loaded, and free of redundancy?

  A single sentence that front-loads the tool's purpose ('Get prioritized maintenance recommendations for one vehicle') and then specifies the inputs. No fluff, reads naturally, and is appropriately sized for the tool's simplicity.

  Shorter descriptions cost fewer tokens and are easier for agents to parse. Every sentence should earn its place.

  Completeness2/5

  Given the tool's complexity, does the description cover enough for an agent to succeed on first attempt?

  For a tool with no annotations and zero parameter schema descriptions, the description leaves out critical details: what the output format is, how prioritization is determined, whether it requires prior anomaly detection, and how to ensure the vehicle ID is valid. While an output schema exists, its content is unknown, so the description should explain enough for an agent to call it confidently, which it does not.

  Complex tools with many parameters or behaviors need more documentation. Simple tools need less. This dimension scales expectations accordingly.

  Parameters2/5

  Does the description clarify parameter syntax, constraints, interactions, or defaults beyond what the schema provides?

  Schema coverage for parameters is 0%, and the description provides no additional meaning for vehicle_id beyond the schema's type/name. It does not specify that vehicle_id is the unique identifier of the vehicle, how to obtain a valid value, or any format hints. Since the description is the only source of param semantics, it is insufficient.

  Input schemas describe structure but not intent. Descriptions should explain non-obvious parameter relationships and valid value ranges.

  Purpose4/5

  Does the description clearly state what the tool does and how it differs from similar tools?

  The description clearly states the tool returns 'prioritized maintenance recommendations' for 'one vehicle', combining two data sources. The 'one vehicle' scope implicitly distinguishes it from fleet-level tools like fleet_health_summary, but it does not explicitly name the alternatives, so it's clear but not maximally differentiated.

  Agents choose between tools based on descriptions. A clear purpose with a specific verb and resource helps agents select the right tool.

  Usage Guidelines2/5

  Does the description explain when to use this tool, when not to, or what alternatives exist?

  No explicit guidance is given on when to use this tool versus siblings (e.g., list_vehicles, get_vehicle_telemetry, detect_anomalies). While 'one vehicle' implies it is not for fleet-level summaries, the description does not state exclusions or recommend alternatives based on use cases, leaving the decision to inference.

  Agents often have multiple tools that could apply. Explicit usage guidance like "use X instead of Y when Z" prevents misuse.

• detect_anomaliesA
  3.8/5.0
  Behavior2/5

  Does the description disclose side effects, auth requirements, rate limits, or destructive behavior?

  With no annotations provided, the description carries full responsibility for disclosing behavioral traits. It does not mention whether the operation is read-only, has side effects, requires specific permissions, or any rate limits. The verb 'list' implies read-only but it is not explicit, and no additional behavioral context is given.

  Agents need to know what a tool does to the world before calling it. Descriptions should go beyond structured annotations to explain consequences.

  Conciseness5/5

  Is the description appropriately sized, front-loaded, and free of redundancy?

  The description is a single, well-structured sentence that front-loads the core action and resource, then immediately adds clarifying parameters and examples. Every element earns its place; there is no redundancy or fluff.

  Shorter descriptions cost fewer tokens and are easier for agents to parse. Every sentence should earn its place.

  Completeness4/5

  Given the tool's complexity, does the description cover enough for an agent to succeed on first attempt?

  For a simple tool with one optional parameter and an output schema present, the description covers purpose, parameter semantics, and scope. It does not explicitly address integration with siblings or pagination, but the presence of an output schema reduces the need to describe return format. Overall, it is adequately complete for its complexity.

  Complex tools with many parameters or behaviors need more documentation. Simple tools need less. This dimension scales expectations accordingly.

  Parameters4/5

  Does the description clarify parameter syntax, constraints, interactions, or defaults beyond what the schema provides?

  Schema coverage is 0%, so the description must compensate. It does so by explaining that the optional vehicle_id parameter, if provided, scopes the anomaly listing to a single vehicle; otherwise, it returns fleet-wide anomalies. This clarifies the default behavior (null) and adds meaning beyond the bare schema declaration.

  Input schemas describe structure but not intent. Descriptions should explain non-obvious parameter relationships and valid value ranges.

  Purpose5/5

  Does the description clearly state what the tool does and how it differs from similar tools?

  The description clearly states the tool lists rule-based anomalies, enumerates specific types (overheating, low battery, fault codes, harsh driving), and specifies the scope as fleet-wide or single-vehicle via an optional parameter. This is a specific verb-resource pairing that distinguishes it from sibling tools by its unique focus on anomalies.

  Agents choose between tools based on descriptions. A clear purpose with a specific verb and resource helps agents select the right tool.

  Usage Guidelines3/5

  Does the description explain when to use this tool, when not to, or what alternatives exist?

  The description implies usage for anomaly detection but provides no explicit guidance on when to choose it over alternatives like fleet_health_summary or get_vehicle_telemetry. It does not mention when not to use it or name any sibling. The usage context is implied by the purpose, but there is no direct comparison or exclusionary statement.

  Agents often have multiple tools that could apply. Explicit usage guidance like "use X instead of Y when Z" prevents misuse.

• list_vehiclesA
  3.8/5.0
  Behavior3/5

  Does the description disclose side effects, auth requirements, rate limits, or destructive behavior?

  With no annotations, the description carries the burden of behavioral disclosure. It states what the tool returns (vehicles with first/last telemetry timestamp), which gives some transparency. However, it does not disclose whether the operation is read-only (likely but not stated), any performance implications, rate limits, or pagination behavior. For a simple list operation this is partially sufficient but not comprehensive.

  Agents need to know what a tool does to the world before calling it. Descriptions should go beyond structured annotations to explain consequences.

  Conciseness5/5

  Is the description appropriately sized, front-loaded, and free of redundancy?

  The description is a single clear sentence that front-loads the primary action ('List every vehicle') and then specifies the key output detail. There is no redundant wording or filler. It is optimally concise for the information conveyed.

  Shorter descriptions cost fewer tokens and are easier for agents to parse. Every sentence should earn its place.

  Completeness4/5

  Given the tool's complexity, does the description cover enough for an agent to succeed on first attempt?

  The presence of an output schema means the return value structure is already defined, so the description need not explain it. The description adds the key detail of including first/last telemetry timestamps, which is useful for selection. However, it omits any mention of ordering, pagination, or limits, which could matter for large fleets, but for a simple list this is acceptable.

  Complex tools with many parameters or behaviors need more documentation. Simple tools need less. This dimension scales expectations accordingly.

  Parameters4/5

  Does the description clarify parameter syntax, constraints, interactions, or defaults beyond what the schema provides?

  The tool has zero parameters, so the schema description coverage is trivially 100%. According to the rubric, zero parameters justify a baseline of 4 because there is nothing for the description to explain about parameters. The description adds no parameter info, but none is needed.

  Input schemas describe structure but not intent. Descriptions should explain non-obvious parameter relationships and valid value ranges.

  Purpose5/5

  Does the description clearly state what the tool does and how it differs from similar tools?

  The description clearly states the verb 'List' and the resource 'every vehicle in the fleet', with the added detail of returning 'first/last telemetry timestamp'. This unambiguously distinguishes it from siblings like get_vehicle_telemetry (which targets a single vehicle) and fleet_health_summary (which provides summary metrics).

  Agents choose between tools based on descriptions. A clear purpose with a specific verb and resource helps agents select the right tool.

  Usage Guidelines2/5

  Does the description explain when to use this tool, when not to, or what alternatives exist?

  No guidance is provided on when to use this tool versus alternatives. The description does not mention any exclusions, prerequisites, or context where another sibling would be more appropriate. The agent must infer the use case solely from the purpose, which is a gap in routing decision support.

  Agents often have multiple tools that could apply. Explicit usage guidance like "use X instead of Y when Z" prevents misuse.

• get_vehicle_telemetryA
  4/5.0
  Behavior3/5

  Does the description disclose side effects, auth requirements, rate limits, or destructive behavior?

  With no annotations, the description carries the full burden of behavioral disclosure. It reveals that results are capped by 'limit' and ordered 'most recent first', which is valuable. However, it does not mention error handling (e.g., unknown vehicle, empty results) or whether the operation is read-only, though 'Get' implies non-mutating. It could go further.

  Agents need to know what a tool does to the world before calling it. Descriptions should go beyond structured annotations to explain consequences.

  Conciseness5/5

  Is the description appropriately sized, front-loaded, and free of redundancy?

  The description is two sentences with no redundancy. The purpose is stated first, then the limit and ordering are added efficiently. Every clause earns its place, and the wording is clean and direct.

  Shorter descriptions cost fewer tokens and are easier for agents to parse. Every sentence should earn its place.

  Completeness4/5

  Given the tool's complexity, does the description cover enough for an agent to succeed on first attempt?

  The description covers the core call requirements: vehicle_id is implied, optional time bounds are explained, and the result cap is specified. The presence of an output schema covers return details. It lacks explicit alternative routing (e.g., 'for fleet summaries use fleet_health_summary'), but the sibling names are self-explanatory and the tool's purpose is clear.

  Complex tools with many parameters or behaviors need more documentation. Simple tools need less. This dimension scales expectations accordingly.

  Parameters4/5

  Does the description clarify parameter syntax, constraints, interactions, or defaults beyond what the schema provides?

  Schema coverage is 0%, so the description must explain parameter meaning. It clarifies that 'start' and 'end' are ISO-8601 timestamps and that 'limit' caps the number of readings. vehicle_id is self-evident from its name and the singular 'one vehicle'. This adds meaning beyond the schema for 3 of 4 parameters.

  Input schemas describe structure but not intent. Descriptions should explain non-obvious parameter relationships and valid value ranges.

  Purpose5/5

  Does the description clearly state what the tool does and how it differs from similar tools?

  The description uses a specific verb 'Get' and a clear resource 'raw telemetry readings for one vehicle', and distinguishes it from sibling tools like fleet_health_summary (summaries) and detect_anomalies (anomaly detection). The term 'raw' signals it's the underlying data, not derived artifacts.

  Agents choose between tools based on descriptions. A clear purpose with a specific verb and resource helps agents select the right tool.

  Usage Guidelines3/5

  Does the description explain when to use this tool, when not to, or what alternatives exist?

  The description implies when to use it (when raw per-vehicle readings are needed) and provides optional parameters (start/end, limit), but it does not explicitly compare to siblings or state when not to use it. The alternatives are inferable from their names, so usage guidance is adequate but implicit.

  Agents often have multiple tools that could apply. Explicit usage guidance like "use X instead of Y when Z" prevents misuse.

• fleet_health_summaryA
  4.5/5.0
  Behavior4/5

  Does the description disclose side effects, auth requirements, rate limits, or destructive behavior?

  No annotations exist, so the description carries the full burden. It fully describes the return content and implies a read-only operation ('Get'), which is accurate. It doesn't mention side effects or latency, but given it's a summary tool with no parameters, this is adequate. No contradiction with annotations (which are absent).

  Agents need to know what a tool does to the world before calling it. Descriptions should go beyond structured annotations to explain consequences.

  Conciseness5/5

  Is the description appropriately sized, front-loaded, and free of redundancy?

  A single, front-loaded sentence that states the purpose and the three key outputs. Every phrase carries meaning, with no filler or redundancy.

  Shorter descriptions cost fewer tokens and are easier for agents to parse. Every sentence should earn its place.

  Completeness5/5

  Given the tool's complexity, does the description cover enough for an agent to succeed on first attempt?

  Without an output schema, the description is responsible for conveying what the tool returns. It covers all essential elements (latest reading, averages, anomaly flags) and is sufficiently complete for an agent to decide when and how to use it. No gaps are apparent for a simple fleet-summary tool.

  Complex tools with many parameters or behaviors need more documentation. Simple tools need less. This dimension scales expectations accordingly.

  Parameters4/5

  Does the description clarify parameter syntax, constraints, interactions, or defaults beyond what the schema provides?

  With zero parameters, the baseline is 4. The description doesn't need to add parameter details, and it doesn't. It correctly implies that no inputs are required.

  Input schemas describe structure but not intent. Descriptions should explain non-obvious parameter relationships and valid value ranges.

  Purpose5/5

  Does the description clearly state what the tool does and how it differs from similar tools?

  The description uses a specific verb ('Get') and resource ('fleet-wide snapshot'), and explicitly lists what it returns (latest reading per vehicle, fleet averages, active anomaly flags). This clearly distinguishes it from siblings like list_vehicles and get_vehicle_telemetry which target individual entities.

  Agents choose between tools based on descriptions. A clear purpose with a specific verb and resource helps agents select the right tool.

  Usage Guidelines4/5

  Does the description explain when to use this tool, when not to, or what alternatives exist?

  The description implies usage for fleet-wide overviews without stating when not to use it. It doesn't name alternatives explicitly, but the clear scope makes it obvious this is the go-to for aggregated fleet health. A minor omission is the lack of explicit exclusions.

  Agents often have multiple tools that could apply. Explicit usage guidance like "use X instead of Y when Z" prevents misuse.