Make a calibration print
make_calibration_printGenerate and slice calibration prints to tune filament temperature, flow, retraction, and first-layer settings.
Instructions
Generate and slice a calibration print for tuning a filament or the printer.
temperature_tower: one tower with a block per nozzle temperature, with the temperature changes written into the G-code. flow: one small cube per flow ratio. retraction: two towers per retraction length. first_layer: five single-layer squares across the bed to check levelling. Use it when a filament is new or prints look off and diagnose_print points to temperature, flow or retraction. Writes the G-code and .gcode.3mf files and returns their paths plus how to read the result.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"kind": "<kind>"
},
"name": "make_calibration_print"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| kind | Yes | 'temperature_tower', 'flow', 'retraction' or 'first_layer'. | |
| values | No | Values to test: temperatures in °C, flow ratios, or retraction lengths in mm; at most 8. Default: a sensible range for the filament. | |
| printer | No | Printer preset name or a unique part of it, e.g. 'Kobra X'. Omit to use the printer selected in the slicer window. | |
| process | No | Process preset (layer height, speeds), e.g. '0.20mm Standard'. Omit to use the slicer window's selection. | |
| filament | No | Filament preset to calibrate. Default: the selected filament. | |
| output_dir | No | Folder for the files. Default: Documents/Anycubic Slicer MCP/calibration. |