edinet — Japanese corporate filings (EDINET, Financial Services Agency)

Status: PUBLIC, shipped BYOK 2026-09-16 (fleet #1942/#1928). The keyless company lookup works for every caller with no credential; the two filing-list tools take the CALLER's own EDINET Subscription-Key as _apiKey. See "Auth" below for why it shipped that way rather than on a platform key.

Part of Pipeworx — an MCP gateway connecting AI agents to 1663+ live data sources.

EDINET is Japan's EDGAR: securities reports (有価証券報告書), quarterly and half-year reports, extraordinary reports, large-shareholding reports (大量保有報告書), tender offers, and the XBRL/PDF/CSV documents behind them.

Tools

Related MCP server: edinet-mcp

The two access rules

1. The code list is keyless. https://disclosure2dl.edinet-fsa.go.jp/searchdocument/codelist/Edinetcode.zip is served by the FSA with no credential — a ~570 KB ZIP holding one Shift_JIS CSV. The pack unzips it (DecompressionStream('deflate-raw')) and decodes it (TextDecoder('shift_jis')); both are supported in workerd, verified 2026-09-13 on a local wrangler dev, which is worth knowing because no other pack in this repo decodes a legacy Japanese encoding.

2. The API v2 needs a free Subscription-Key, passed by the caller as _apiKey. Sent upstream as the Subscription-Key query parameter.

Auth

BYO key. edinet_search_filers needs none. edinet_list_filings and edinet_company_filings require an EDINET API v2 Subscription-Key, which the caller supplies as _apiKey; without one they refuse with the words "requires an API key", so the gateway books the refusal as a gate rather than as a defect of ours.

Pipeworx holds no platform key for EDINET, and that is a decision, not an oversight (fleet #1942, 2026-09-16). Bruce registered an EDINET account — the account exists — but the FSA's own key-issuance page rendered blank on their side, so the account could not yield a key. Rather than hold a finished pack behind a third party's outage, the pack shipped BYOK.

Anyone re-checking this: the thing to look at is the key page behind a logged-in EDINET account, not the pre-auth URL — …/api/auth/index.aspx?mode=1 302s to Azure B2C and answers normally whether or not the page behind the login works, so probing it unauthenticated tells you nothing either way.

If a key is obtained, platformKeyEnv: 'PLATFORM_EDINET_KEY' goes in the manifest in the same change that lands wrangler secret put — declaring it early un-sinks routing and points Japanese-filings questions at tools that can only refuse (the fda-inspections precedent, #617).

Traps

• There is no company-search endpoint. The API lists filings BY DATE and nothing else (documents.json?date=YYYY-MM-DD&type=2). "Toyota's filings" is therefore a walk of the daily lists — one upstream request per day, which is why edinet_company_filings caps its range at 31 days. Resolve the company first with the keyless edinet_search_filers.

• The securities code has five digits. Toyota is 72030 in EDINET and 7203 on the exchange. Both tools accept either and return both (sec_code / ticker).

• Shift_JIS, not UTF-8. Decoding the code list as UTF-8 yields mojibake for every Japanese name, silently — the ASCII columns still parse.

• Individual filers. ~3,200 of the ~11,400 rows are natural persons (大量保有報告書 filers, 提出者種別 starting 個人). Their 所在地 is a home address, so the pack drops location for those rows and keeps it for organisations.

• Annual reports cluster. Most listed Japanese companies close 31 March and file in late June; an empty two-week window is usually the calendar, not a bug.

Why there is no platform key (history)

EDINET API v2 registration is not 法人番号-gated (that was the worry carried over from NTA houjin-bangou — see fleet #1928). It is an Azure AD B2C self-service signup whose form asks for exactly four things:

email · emailed verification code · password · CAPTCHA

Field IDs read live off the signup page, 2026-09-13: email, emailVerificationCode, newPassword, reenterPassword, captchaEntered / challengeString / captchaControlChallengeCode ("ボットを倒すお手伝いをします"). No organisation, no corporate number, no Japanese address — a US individual can register.

The CAPTCHA made registration a human step, so it went to Bruce. He did it — and then EDINET's key-issuance page came back blank (2026-09-16). The pack was promoted BYOK at that point rather than waiting on a vendor website.

What is still outstanding, for whoever picks this up when the page recovers:

1. wrangler secret put PLATFORM_EDINET_KEY on the gateway.

2. Add platformKeyEnv: 'PLATFORM_EDINET_KEY' to the edinet entry in workers/gateway/src/pack-manifest.json, in that same change.

3. Replace the two keyed tool-examples.json entries with calls that actually returned rows. As shipped, edinet:edinet_list_filings and edinet:edinet_company_filings carry argument shapes taken from the FSA's own spec (ESE140206, EDINET API仕様書 Version 2) and from a real EDINET code we resolved live (E02144 = Toyota) — but the calls themselves have never completed, because we have never held a key. Treat those two examples as unverified until someone runs them.

Verified live (keyless half only)

2026-09-13, re-run 2026-09-16 against the promoted pack:

edinet_search_filers({query:"Toyota", limit:3})   → 6 matches of 11,389 filers
  E02144  7203  トヨタ自動車株式会社 / TOYOTA MOTOR CORPORATION
  E02505  8015  豊田通商株式会社   / TOYOTA TSUSHO CORPORATION
  E00540  3116  トヨタ紡織株式会社 / TOYOTA BOSHOKU CORPORATION
edinet_search_filers({query:"トヨタ自動車"})       → 1 match  (E02144)
edinet_search_filers({query:"7203"})               → 1 match  (E02144)
edinet_search_filers({query:"E02144"})             → 1 match  (E02144)
edinet_search_filers({query:"Mitsubishi UFJ", listed_only:true})
                                                   → E03606 / 8306

edinet_list_filings and edinet_company_filings refuse without a key, with the words "requires an API key" so the gateway books the refusal as a gate rather than an error.

Quick Start

Add to your MCP client (Claude Desktop, Cursor, Windsurf, etc.):

{
  "mcpServers": {
    "edinet": {
      "url": "https://gateway.pipeworx.io/edinet/mcp"
    }
  }
}

What this endpoint actually serves

tools/list at https://gateway.pipeworx.io/edinet/mcp returns the tools in the table above plus the shared Pipeworx meta-tools — ask_pipeworx, discover_tools, search_within, remember/recall and the rest of the gateway-wide set. So the tool count you see is larger than this table: a single-pack endpoint currently lists roughly 30 shared tools alongside the pack's own. The connection's initialize response states its exact scope, and is the authoritative answer for a given day.

This is deliberate, not multiplexing by accident. The meta-tools are what let a scoped connection answer a question this pack does not cover — via ask_pipeworx, which routes across the whole catalog — without you adding a second MCP server. There is currently no way to mount a pack endpoint without them; if the extra schemas cost you more context than the routing is worth, connect to the full gateway once rather than to several pack endpoints.

Or connect to the full Pipeworx gateway to get every pack's tools listed directly, instead of just this one's:

{
  "mcpServers": {
    "pipeworx": {
      "url": "https://gateway.pipeworx.io/mcp"
    }
  }
}

Both URLs reach the same gateway and the same 1663+ data sources. The only difference is which pack's tools are listed directly; ask_pipeworx reaches all of them from either one.

No MCP client? Call it over HTTP

curl -X POST https://gateway.pipeworx.io/v1/tools/edinet_search_filers \
  -H 'Content-Type: application/json' \
  -d '{"query":"Toyota"}'

No account needed for the first calls. Inspect any tool: GET https://gateway.pipeworx.io/v1/tools/edinet_search_filers. Find one: POST https://gateway.pipeworx.io/v1/tools/search_packs with {"query":"..."}.

Standalone (no gateway account)

This package also runs as a local stdio MCP server — no Pipeworx account, no gateway round-trip:

{
  "mcpServers": {
    "edinet": {
      "command": "npx",
      "args": ["-y", "@pipeworx/mcp-edinet"]
    }
  }
}

Or run it directly to confirm it starts:

npx -y @pipeworx/mcp-edinet

It speaks MCP over stdin/stdout and answers initialize/tools/list/tools/call for only this pack's tools — none of the shared meta-tools the gateway connection above adds. Same source, same tools, no ask_pipeworx routing.

Using with ask_pipeworx

Instead of calling tools directly, you can ask questions in plain English — this works on the pack endpoint above as well as on the full gateway:

ask_pipeworx({ question: "your question about Edinet data" })

The gateway picks the right tool and fills the arguments automatically.

More

• Docs and guides

• pipeworx.io

License

MIT