Set heating temperature
hive_set_heating_temperatureSet a Hive heating zone's target temperature: schedule mode lasts until the next scheduled change, while manual mode holds it until changed. Confirm open-ended holds; use boost for temporary changes.
Instructions
Set a zone's target temperature. In schedule mode this lasts until the next scheduled change, like turning the thermostat dial; pass mode=manual to hold it. If the zone is off, the target is saved but nothing heats until the mode changes. Holding a temperature in manual mode (mode=manual, or a zone that is already in manual) lasts indefinitely, so it needs confirm: true; prefer hive_boost_heating for a temporary change.
Tool call template
Replace each placeholder with a value matching the input schema. Only required parameters are included; add optional parameters as needed.
{
"id": 1,
"jsonrpc": "2.0",
"method": "tools/call",
"params": {
"arguments": {
"temperature": "<temperature>"
},
"name": "hive_set_heating_temperature"
}
}Input Schema
| Name | Required | Description | Default |
|---|---|---|---|
| mode | No | Also switch mode: manual (hold this temperature) or schedule (just until the next scheduled change, as turning the dial does) | |
| zone | No | Heating zone or TRV zone, by name (for example "Heating" or "Bedroom") or ID. Can be left out when there's only one. See hive_get_heating | |
| confirm | No | Must be true for heating mode manual or hot water mode on, which last indefinitely (until something changes them). Only set it once the user has agreed to an open-ended change; for a temporary one, boost instead | |
| dry_run | No | Preview only: check the call and return the exact requests it would send to Hive, without sending them. Nothing is changed | |
| temperature | Yes | Target temperature in °C, from 5 in steps of 0.5, up to HIVE_MAX_TEMP (see the schema maximum) |