Skip to main content
Glama
substance-painter-mcp

substance-painter-mcp

by jwang47

substance-painter-mcp

An MCP server for driving Adobe Substance 3D Painter conversationally — bake mesh maps, stack smart materials, and tune generator parameters by talking to the app instead of guessing weights and re-baking.

Built for look-dev iteration, where weathering is authored by taste against a reference rather than by fixed numbers.

Requirements

  • Substance 3D Painter 12.x (developed against 12.1.1 / Python API 0.3.5), running

  • Python 3.10+ for the MCP server

Windows, macOS and Linux. No launch flags and no --enable-remote-scripting — Painter can be started normally. If you have no Python installed, Painter bundles a complete CPython 3.13 at <install>/resources/pythonsdk/python.exe that works fine.

Related MCP server: Marmoset Toolbag 5 MCP Server

Install

1. Install the bridge plugin into Painter

python scripts/install_plugin.py

This copies painter_plugin/substance_painter_mcp_bridge into Painter's user plugin folder, <Documents>/Adobe/Adobe Substance 3D Painter/python/plugins/. On Windows the Documents location is read from the shell-folder registry, so OneDrive redirection and moved Documents folders are handled; pass --plugins-dir to override.

Use --link to symlink instead of copy while developing (needs Developer Mode or an elevated shell on Windows), and --uninstall to remove it.

2. Enable it in Painter

Python → Reload Plugins Folder, then tick substance_painter_mcp_bridge under Python → Plugins.

This step is required. Painter treats everything in python/plugins/ as an optional component: modules are discovered but not started until enabled. Only python/startup/ loads automatically. Painter remembers the choice, so this is one-time — but a fresh install that skips it will simply never open the port.

Prefer no UI step? python scripts/install_plugin.py --startup installs into startup/ instead, which always loads, at the cost of losing the on/off toggle.

Either way the log window should show:

[substance-painter-mcp] listening on 127.0.0.1:60043

3. Install the MCP server

python -m venv .venv
.venv/Scripts/python -m pip install -e .     # .venv/bin/python on macOS/Linux

4. Register it with your MCP client

{
  "mcpServers": {
    "substance-painter": {
      "command": "C:/Users/you/code/substance-painter-mcp/.venv/Scripts/python.exe",
      "args": ["-m", "substance_painter_mcp"]
    }
  }
}

Then call painter_status — it distinguishes "Painter isn't running" from "that operation was invalid", so it's the right first thing to try when something fails.

Configuration

Variable

Default

Meaning

SP_MCP_BRIDGE_HOST

127.0.0.1

Bind/connect address

SP_MCP_BRIDGE_PORT

60043

Bridge port

SP_MCP_BRIDGE_TIMEOUT

600

Client socket timeout, seconds

The bridge binds to loopback only. It executes arbitrary Python inside Painter by design (painter_exec), so do not expose the port beyond localhost.

Tools

Tool

Purpose

painter_status

Reachability and version check

painter_project_info / painter_create_project / painter_open_project / painter_save_project

Project lifecycle

painter_search_resources

Find smart materials, generators, masks, export presets

painter_get_baking_parameters / painter_set_baking_parameters

Inspect and set bake settings, including high-poly path and cage distance

painter_bake / painter_baking_status

Bake mesh maps (async, with optional wait)

painter_layer_tree

Read the layer stack; every node has a uid

painter_insert_smart_material

Instantiate a shelf smart material

painter_insert_layer / painter_insert_generator / painter_add_mask

Build stacks

painter_set_fill_source / painter_import_resource

Assign a bitmap or flat colour to a fill layer's channel

painter_set_layer / painter_delete_layer

Name, visibility, opacity, blending mode; delete

painter_screenshot

Capture the viewport — see the result instead of inferring it

painter_get_parameters / painter_set_parameters / painter_apply_preset

Tune generators — the look-dev loop

painter_list_export_presets / painter_export_textures

Export maps

painter_list_ops / painter_call / painter_exec

Escape hatches

The tuning loop

painter_get_parameters is the tool that makes conversational iteration work. It returns each parameter's key, human label, widget type, current value and enum options, so the model discovers that a rust generator exposes Dirt Level rather than guessing at names:

painter_layer_tree()                        → find the generator's uid
painter_get_parameters(uid=42)              → see what knobs exist
painter_set_parameters(uid=42, '{"Dirt Level": 0.7}')
painter_screenshot()                        → look at what that did

painter_screenshot closes the loop. Without it the model is editing blind and has to trust that a parameter did what it claims; with it, each change can actually be checked.

A smart material is a group of layers, so tuning one means walking into the group and adjusting the generator effects inside it. painter_layer_tree returns the full hierarchy with uids in a single call for that reason.

Wear is driven by the baked mesh maps via generators — mg_metal_edge_wear for edges and bolts, mg_dirt for crevices, mg_position multiplied into a mask to bias wear vertically. Mask effects blend with each other, which is how "heavier down low, lighter up top" gets expressed.

How it works

Claude  ──stdio──>  MCP server (this repo, any Python)
                          │
                          │  newline-delimited JSON over TCP, loopback only
                          ▼
                    Bridge plugin (runs inside Painter, Qt server on the main thread)
                          │
                          ▼
                    substance_painter Python API

The bridge is a Painter plugin rather than the --enable-remote-scripting HTTP endpoint, for two reasons:

  1. No launch flag. Painter can be started normally, including from Creative Cloud.

  2. Thread affinity. The substance_painter API is only safe to call from the main/UI thread. A Qt QTcpServer created inside the plugin lives on Painter's own event loop, so every request handler already runs on the right thread — no cross-thread marshalling and no temp-file result passing.

Wire protocol

Newline-delimited JSON, one object per line:

→ {"id": 1, "op": "layers.tree", "params": {"deep": true}}
← {"id": 1, "ok": true, "result": {...}}
← {"id": 1, "ok": false, "error": {"kind": "no_project", "message": "..."}}

json.dumps escapes newlines inside strings, so a serialised message never contains a raw newline of its own and the framing is safe.

Development

.venv/Scripts/python -m pytest      # protocol tests, no Painter needed
.venv/Scripts/python -m ruff check .

tests/ runs the bridge client against a fake NDJSON server, so framing, error mapping and reconnect-after-plugin-reload are covered without the application installed. Anything touching the substance_painter API needs Painter running.

Against a running Painter:

python scripts/smoke_test.py                      # exercise the bridge end to end
python scripts/reload_plugin.py                   # hot-reload after editing the plugin
python scripts/smoke_test.py --mesh mesh.fbx --force   # also create a project

reload_plugin.py avoids a Painter restart on every edit. Install the plugin with --link so the files are already in place and only the reload is needed.

Notes and limitations

  • Baking is asynchronous. API 0.3.5 has no synchronous bake(), only bake_async. The bridge tracks progress through Painter's BakingProcessProgress / BakingProcessEnded events and painter_bake polls to completion by default.

  • Cage distance matters on meshes with overlapping shells. Cage distances are relative to the bounding box by default, and a generous cage samples interior surfaces and produces black patches. Read the real key names with painter_get_baking_parameters before setting them — they come from Painter, not from this server.

  • One bake at a time. The bridge rejects a second concurrent bake.

See docs/api-findings.md for what was verified against the installed SDK, including several silent-failure modes worth knowing about.

License

MIT — see LICENSE.

Tool Schema Changelog

Recent tool additions, removals, and schema changes observed during successful MCP inspections.

Loading tool schema changelog…

    Related MCP Connectors

    Related MCP Servers

    • A
      license
      Not graded
      quality
      D
      maintenance
      Enables AI-assisted 3D modeling and scene control in Autodesk Maya through natural language commands, supporting object creation, transformation, material application, and more.
      36 npm
      8
      MIT
    • A
      license
      Not graded
      quality
      D
      maintenance
      Enables AI assistants to control Autodesk Maya through natural language for scene creation, modeling, material assignment, and object manipulation.
      1
      MIT