desktop-mcp

Windows desktop-control MCP server: screenshot, window management, mouse/keyboard input, and ffmpeg screen-recording, config-gated by tool group (input off by default) -- built to the same standard as mcp-factory and rag-mcp: own pyproject, fastmcp server, honest README, real test suite.

Quickstart

pip install desktop-mcp

// ~/.claude.json (or any MCP-host stdio client config)
{
  "mcpServers": {
    "desktop-mcp": {
      "command": "desktop-mcp"
      // or: "command": "python", "args": ["-m", "desktop_mcp"]
    }
  }
}

window/input/record tool groups are env-gated -- input stays off unless you explicitly opt in. See Env vars below for the full table.

Related MCP server: Computer Control MCP

Tool groups

A disabled group returns a structured policy_refusal error (never a silent no-op, never a crash). Input actions are additionally rate-capped (default 60 actions/min, tunable via DESKTOP_MCP_RATE_LIMIT_PER_MIN) -- exceeding the cap returns a structured rate_limited error.

This is defense-in-depth: harness-level permission prompts are the first gate, but the server itself refuses input/window/record actions unless its own env explicitly enables them, so a misconfigured or overly-permissive harness can't turn on capabilities the operator didn't opt into for this process.

Security

Read this before you register desktop-mcp. This is a desktop-control server; what it can do to your machine is spelled out here plainly so you can make an informed decision. Honesty about the blast radius is the point.

• The observe group (screenshot, window enumeration) is ALWAYS ON and cannot be disabled. Any caller that can reach this server can capture the contents of any visible window on the machine -- including a password manager, an authenticator/2FA app, a seed phrase, a banking tab, or a private message. screenshot returns a file path to a PNG written to the scratch dir (default %TEMP%\desktop-mcp-scratch), not inline pixels, so captured screen contents also persist on disk until that directory is cleared. Treat the scratch dir as sensitive and run this server only on a machine and under a harness you trust.

• DESKTOP_MCP_ENABLE_INPUT=1 grants keystroke and mouse injection into the focused window -- this is RCE-equivalent. With the input group enabled, a caller can type commands, press hotkeys, and drive the mouse in whatever window currently has focus (a terminal, a browser, an admin tool). It is OFF by default for exactly this reason; turn it on only when you understand that you are handing the caller the keyboard. When disabled every input tool returns a structured policy_refusal (never a silent action).

• Least privilege: leave input, window, and record groups off unless a specific task needs them, keep this server on a trusted host, and do not run it elevated (admin) unless you have accepted that an elevated input group can drive elevated windows.

The env-gating, default-off input group, structured refusals, and rate cap described above are the enforced controls; this section states, without softening, what remains reachable by design.

Honest-capabilities table

Every claim below maps to the file that implements it and the test(s) that verify it -- no capability is asserted without a corresponding implementation + test.

Limitations (read before relying on this)

• UIPI (User Interface Privilege Isolation) -- protects window handles, not input. A medium-integrity process (this server, unless you elevate it) cannot manipulate a window owned by a higher-integrity (elevated/admin) process: focus_window, move_resize_window, minimize_window, and restore_window go through pygetwindow's window-handle APIs (desktop_mcp/groups/window.py), which Windows blocks under UIPI and which this server surfaces as a structured window_action_failed error naming UIPI, never a silent no-op. Keyboard/mouse input tools ARE covered by UIPI too -- and worse, they fail silently. type_text, hotkey, key_press, and the mouse actions (desktop_mcp/groups/input_tools.py) go through pyautogui, whose Windows backend actually calls the legacy keybd_event/mouse_event Win32 functions (not SendInput -- pyautogui tried SendInput and reverted to the older calls; see _pyautogui_win.py in the installed package). Per Microsoft's own docs, UIPI applies to synthesized input generally: "[applications] are permitted to inject input only into applications that are at an equal or lesser integrity level" (MSDN SendInput reference), and critically, "neither GetLastError nor the return value will indicate the failure was caused by UIPI blocking." keybd_event/mouse_event are void-return legacy calls with no failure signal at all, so pyautogui (and this server) cannot detect a block even in principle: if an elevated window has focus, these tools report {"ok": true} while Windows silently discards the injected keystrokes/clicks -- no exception, no error field, nothing reaches the target. This is worse than the window-handle path above, which at least raises a structured window_action_failed error naming UIPI. There is no code-level bypass and no workaround short of running the server elevated (or not enabling the input group at all), which this project does not do or recommend. Operators should treat any elevated app that could plausibly have focus as silently unreachable by this server's input tools, not as a gap that lets them through. Possible future enhancement (not implemented): detect the foreground window's integrity level before injecting and return a structured refusal instead of a false {"ok": true} -- tracked as a v2 idea, not a current capability.

• DPI scaling. The server sets per-monitor-v2 DPI awareness at startup so mss pixel coordinates and pyautogui point coordinates should agree on scaled displays. This bootstrap is unit-tested for idempotency/no-crash only -- actual coordinate agreement on a live multi-DPI multi-monitor setup has not been automated-tested and should be spot-checked if you're targeting a non-100%-scaled monitor.

• UAC secure desktop. When Windows switches to the secure desktop (UAC elevation prompts, Ctrl+Alt+Del, lock screen), no process running on the regular desktop -- including this server -- can see or interact with it. Screenshots will show whatever was on the regular desktop before the switch; input calls will not reach the secure desktop at all.

• Single machine, local only. No network transport, no remote control. stdio only, spawned by the MCP host on the same machine.

• Input group is off by default in this repo's own registration. See ~/.claude.json's desktop-mcp entry -- DESKTOP_MCP_ENABLE_INPUT is not set there. Enabling it is a deliberate per-registration operator choice, not a code change.

• pyautogui failsafe. FAILSAFE=True is intentional: slamming the cursor into a screen corner mid-action raises inside pyautogui and aborts the call. This can interrupt an in-flight mouse_drag. Treated as acceptable v1 behavior (see plan's Open questions) -- it's a deliberate human kill-switch, not a bug.

• No OCR / vision analysis. Screenshots are raw PNGs; interpreting their content is the consumer's job, not this server's.

• No clipboard tools. Credential-adjacent surface, deferred to a v2 with its own safety design.

• Not registered with the mcp-factory hub. This ships as a standalone repo (own pyproject, own venv-free system-Python312 install), matching the rag-mcp model. Hub/registry integration is a v2 candidate.

Env vars

Usage examples

// A tool call from the MCP host, illustrative -- not a shell command.
{"tool": "screenshot", "arguments": {"monitor": 0}}
// -> {"ok": true, "path": "C:\\Users\\...\\Temp\\desktop-mcp-scratch\\screenshot-....png", "w": 3840, "h": 1080, "monitor": 0}

{"tool": "record_start", "arguments": {"fps": 30, "max_duration_s": 30}}
// -> {"ok": true, "path": "...\\recording-....mp4", "pid": 12345, "fps": 30, "max_duration_s": 30}
{"tool": "record_stop", "arguments": {}}
// -> {"ok": true, "path": "...\\recording-....mp4", "bytes": 800560, "duration_s": 3.13}

// input group disabled (default):
{"tool": "mouse_click", "arguments": {"x": 500, "y": 500}}
// -> {"ok": false, "error": {"type": "policy_refusal", "group": "input", "required_env": "DESKTOP_MCP_ENABLE_INPUT", ...}}

Testing

# unit suite (mocked backends, no real screen/input/recording touched)
python -m pytest -q

# handshake check -- prints every registered tool name
python scripts/list_tools.py

# real-hardware smokes (real screenshot PNG, real ~3s screen recording;
# never input-injection -- see safety rails above)
DESKTOP_MCP_LIVE=1 python -m pytest -q -k live_screenshot
DESKTOP_MCP_LIVE=1 python -m pytest -q -k live_record

Install

pip install -r requirements.txt   # or: pip install .
# deps: fastmcp==3.4.2, mss==10.2.0, pyautogui==0.9.54, PyGetWindow==0.0.9, pywin32==312
# also requires ffmpeg + ffprobe on PATH for the record group

Registered in ~/.claude.json as desktop-mcp (stdio, system Python312, observe+window+record groups enabled, input group absent from env).

Commercial support

Maintained by Jaimen Bell. For production MCP integrations, custom servers, or agent-reliability work, see jaimenbell.dev or sponsor ongoing maintenance via GitHub Sponsors.

mcp-name: io.github.jaimenbell/desktop-mcp