Skip to main content
Glama

Server Configuration

Describes the environment variables required to run the server.

NameRequiredDescriptionDefault
--portNoPort for the local chamfer-serve HTTP bridge that chamfer-mcp connects to, e.g. 4310.

Instructions

Guidance the server publishes about itself, which clients place ahead of the tool catalog so the model reads it before choosing anything.

This server publishes no instructions, or was last inspected before Glama recorded them.

Capabilities

Features and capabilities supported by this server

Protocol revision2025-11-25

CapabilityDetails
tools
{}

Tools

Functions exposed to the LLM to take actions

NameDescription
chamfer_get_drawingA

Read the active millimeter 2D CAD drawing state (layers, entities, revision) and its deterministic geometry verification summary.

chamfer_executeA

Execute deterministic 2D CAD drafting commands in millimeters atomically and run manufacturing/geometry verification. Supported commands: NEW [name], LAYER [#hex] [CONSTRUCTION], RECTANG <x1,y1> <x2,y2> [id=...], PLINE [... C] [id=...], LINE [...] [id=...], CIRCLE <cx,cy> [D] <r_or_d> [id=...], ARC [id=...] (or ARC C <cx,cy> <start_deg> <end_deg>), OFFSET [entity_id] <side_x,y> [id=...], CHAMFER, FILLET, TRIM, ROTATE, MIRROR, ARRAY, TEXT, DIM <dim_pt> [id=...], SELECT <ALL|NONE|ids>, MOVE , COPY , ERASE [ids], UNDO, REDO.

chamfer_modify_entityA

Update an existing entity's properties by ID (center, radius, points, closed, layer) and re-verify geometry. Use this to fix open contours or clearance collisions.

chamfer_lintB

Run deterministic 2D geometry and CNC/manufacturing checks (open contour gaps, self-intersections, duplicate cuts, hole-edge collisions, thin webs, stray holes).

chamfer_export_dxfA

Export the verified 2D drawing to ASCII R2010 millimeter DXF. Optionally write the output to a local .dxf file path (refuses to overwrite unless overwrite=true).

chamfer_import_dxfB

Import planar millimeter ASCII DXF text into the active workspace.

chamfer_cam_reportA

Compute laser/CNC manufacturing telemetry for the active 2D drawing: total cutting path length (mm), pierce count, net part area (mm2), scrap percentage, and sheet mass.

chamfer_extrude_3dA

Extrude the active single-part planar 2D drawing into an exact Open CASCADE 3D B-Rep solid and optionally save STEP or STL to disk.

Prompts

Interactive templates invoked by user choice

NameDescription

No prompts

Resources

Contextual data attached and managed by the client

NameDescription

No resources

TDQS

A3.7/5.0

Scored across 8 tools

Disambiguation4/5

Most tools have clear distinct roles across drafting, modification, linting, import/export, CAM reporting, and 3D extrusion. However, chamfer_execute is a broad catch-all that includes editing operations overlapping with chamfer_modify_entity, and verification appears in get_drawing, execute, and lint, creating some potential misselection.

Naming Consistency4/5

All tool names use a consistent chamfer_ prefix and snake_case formatting. The pattern is mostly verb_noun, but a few names deviate as bare verbs (execute, lint) or noun phrases (cam_report), preventing a perfect score.

Tool Count5/5

Eight tools are well-scoped for a 2D CAD/CAM server, covering state access, command execution, entity modification, validation, DXF I/O, manufacturing telemetry, and 3D extrusion. Each tool has a clear reason to exist without excessive granularity.

Completeness5/5

The surface covers the full lifecycle: read state, execute drawing commands, modify entities, import/export DXF, lint geometry and manufacturing issues, compute CAM metrics, and extrude to 3D. No obvious gaps remain for the stated CAD/CAM domain.

Maintenance

ActivityNo data
ResponsivenessOutdated data