Per-room temperature statistics, mean setpoint, time below / within / above target, largest temperature drop and cool-down rate, plus total boiler heat-demand time. Default: yesterday. Deterministic calculations; no energy or gas figures.

Compare all rooms over a period (default: last 7 days): warmest/coolest, most variable, most time below target, largest drop and fastest cool-down after setpoint decreases. Returns per-room metrics and rankings.

Rule-based detection of unusual readings in 30-minute room data (default: last 24 h, at most 14 days): implausible values or jumps, constant readings, missing data, rapid drops at a constant setpoint, sustained deviation from the setpoint. Each finding has severity, confidence, evidence and an explanation; findings are observations, not diagnoses.

List the homes in the Netatmo account that have Energy devices (thermostats, radiator valves), with room and device counts and whether boiler history is available.

Details of one home: heating mode, schedules, rooms and devices (topology only; use the status tools for live values).

List the rooms of a home with their IDs, types and the devices installed in each.

List thermostats, radiator valves and relays/gateways of a home with their model, room and gateway. Use netatmo_get_device_status for battery, signal and reachability.

Current temperature, setpoint, mode and heating demand of every room, boiler on/off, and alerts (unreachable devices, low batteries, open windows).

Current measured temperature and target temperature (setpoint) of one room, with setpoint mode, heating demand and open-window state. Identify the room by room_id or room_name.

Whether the boiler is currently requested to heat, which rooms request heat (heating demand %), and anticipation. Demand is not boiler power or energy use.

Battery, radio/Wi-Fi signal, reachability, firmware and error codes of all devices of a home, or of one device.

Measured temperature history of a room with statistics (min, max, mean, variability) and coverage/gaps. Default: last 24 h, aggregated. Missing data is reported, never filled in.

Target temperature (setpoint) history of a room, including the periods during which each setpoint applied. Default: last 24 h.

How long the thermostat requested heat from the boiler over a period (minutes and share of time), per bucket. Requires a Netatmo thermostat. This is heat-demand time, not gas or energy consumption. Default: yesterday.

Weekly heating schedules of a home: zones (e.g. Comfort, Night, Eco) with the setpoint of each room, away/frost-guard temperatures, and the timetable as day + time + zone. Shows which schedule is active.