CadKit MCP Server
OfficialProvides Bambu Lab-specific functionality, including generating finished Bambu Studio projects with plates and presets, and experimental LAN printer interaction such as reading printer status, matching filament, recording, capturing camera frames, writing K values, and generating surface textures.
This server does not currently have a deployable release on Glama. Follow the repository's setup instructions to install and configure it for your MCP client, including any required credentials and local dependencies.
CadKit
CadKit lets your AI design 3D-printed parts for you. You say what you need ("a holder for my screwdrivers", "an enclosure for this board with USB-C"); your AI builds the part in CadKit, CadKit checks it, and you get files that are ready for your slicer.
You do not model anything yourself. CadKit gives the AI a toolbox: it builds every part from code (build123d), runs a catalog of checks on every part and every pair of parts (wall thickness, overhangs, fits, collisions, tipping over, …), names the exact spot of every problem, and keeps a list of the questions only you can answer.
What CadKit is good at is the print that fits the first time on your own printer:
Measured fits. You print one small calibration piece per printer, nozzle and filament and measure it; every fit is then computed from your numbers. Without them a fit is not released — CadKit stops instead of guessing.
A stop list. Dimensions the AI could only guess (your phone, the nut you bought) block the handoff until you confirm or measure them.
A cross-check on the slicer's result. CadKit slices the plate and reads the G-code: supports inside a fit, thin features the slicer dropped, cooling per layer, first-layer gaps.
Insert pauses for nuts and magnets, checked against the layer the pause lands on.
A finished Bambu Studio project with plates, two materials and your presets, next to plain 3MF, STL and STEP.
What CadKit is not: a CAD program with a drawing surface, a slicer, or a sandbox (see Trust).
What you need
Windows 10 or 11, 64-bit. This release runs on Windows only. Linux and macOS are not supported yet.
An AI app that speaks MCP: Claude Desktop or Claude Code, ChatGPT / Codex, Cursor or VS Code.
A 3D printer and its slicer. The slicer cross-check works with Bambu Studio and OrcaSlicer (PrusaSlicer with an exported
config.ini). Without a slicer CadKit still checks the model and hands off STL, STEP and 3MF; grams, print time and supports then come from your slicer alone.Digital calipers. CadKit asks you to print a small test piece once and measure three dimensions — without them you can design and look at a part, but its fits are not released for printing.
Related MCP server: techhand-print-fab
Install
The installer. Download CadKit-<version>-Setup.exe from the
Releases page and run it. It
installs for your user only, to %LOCALAPPDATA%\Programs\CadKit, adds
CadKit to the Start menu and needs no administrator rights. Every release
lists the SHA-256 of its files; compare it before you run the installer
(Get-FileHash .\CadKit-<version>-Setup.exe in PowerShell). An installed
CadKit updates itself from the Releases page and accepts only updates
that carry the project's signature.
The installer is not yet signed with a Windows code-signing certificate. Windows SmartScreen therefore shows "Windows protected your PC" with an unknown publisher on the first start; after you have compared the SHA-256, choose More info → Run anyway. Updates do not depend on this: they are checked against the project's own Ed25519 signature before anything is installed.
From source. With Python 3.12 and uv:
git clone https://github.com/cadkit-dev/cadkit.git cadkit
cd cadkit
uv sync --extra mcp
uv run cadkit doctorcadkit doctor tells you what works on your machine and what is missing
(slicer, slicer profiles, OpenSCAD — all optional). A source install is
updated with git pull and uv sync, not by CadKit itself.
To remove an installed CadKit: Settings → Apps → Installed apps → CadKit → Uninstall. Your projects and settings stay where they are (see below).
First project
Connect your AI. Open CadKit from the Start menu (from source:
uv run python -m cadkit.programm), go to the Connect AI tab, add CadKit to your AI app, then restart the AI app. Without the window: point your AI app's MCP configuration atcadkit mcp.Ask your AI. Start a new chat and paste the starter prompt from the start page, for example:
Read the CadKit guide first and ask me for my printer, nozzle and material. Then build me a simple phone stand for my desk: phone up to 80 mm wide and 10 mm thick, leaning back at about 60°. Create the project first-try (if it is already there from an earlier try, continue in it), check it until it is green or only questions for me are left, and show me the result.
Watch it. The Studio tab shows the model live and reloads after every check. You can point at a spot in the 3D view and leave a note; ask your AI to look at your selection.
You can also drive CadKit yourself: cadkit new <folder>, cadkit check,
cadkit calibrate, cadkit handoff; cadkit --help lists everything and
cadkit guide prints the guide your AI reads.
What to expect
The first check usually ends with questions — the stop list. The AI asks you to confirm dimensions it could only guess (your phone, your screwdriver handles) and to calibrate once.
Calibrate once per printer, nozzle and material. Print the small calibration block, measure three values with calipers and give them to the AI. Saved with
--shared, every later project for that printer, nozzle and material uses them.Green means no check is red — not that the part works. CadKit does not know your load cases or the real size of things you bought. Print a test piece for anything that has to fit.
Yellow means not checked. A check that could not run, or data that is missing, never counts as passed.
At the end, the handoff gives you STL, STEP and 3MF files with the parts in print orientation, plus the parameters and the open questions.
Printers and slicers
CadKit's checks on the model do not depend on a printer brand. The parts around the slicer do:
Slicer profiles are taken from the Bambu Studio or OrcaSlicer installed on your machine; CadKit ships none. For a printer it cannot resolve, the project's
profile/README.mdsays which presets to export.The finished Bambu Studio project, the preset tools and the chamber climate profile are made for Bambu Lab printers.
Experimental, tried on the Bambu Lab X2D only: reading the printer over the LAN (
cadkit printer: start stages, filament match, recording, camera frames), writing K values, and the surface texture generator (cadkit surface). Expect rough edges on other machines.
Trust: CadKit runs a project's code
A CadKit project is Python code. check, build, audit and handoff
run that code with your user rights — there is no sandbox, only a
memory and time limit.
Projects your AI creates in CadKit are trusted automatically. An AI you connected to CadKit can therefore run code as you; connect only an AI you would also let use your terminal.
A project you downloaded or copied runs only after you trust it: Trust this project on its page in the CadKit window, or
cadkit trust <folder>typed at a terminal. Until then every run ends with "not trusted yet". Your AI cannot do this for you.Trust only projects whose source you trust, the same as any program.
More in SECURITY.md.
Examples
beispiele/gridfinity_bin and beispiele/pcb_enclosure are small
projects to look at. Copy one into your projects folder, trust it
(cadkit trust <folder>), then run cadkit check in it.
Where your files are
What | Where |
Your projects |
|
Settings, trust list, calibration cache |
|
The installed program |
|
CadKit runs on your computer. It has no telemetry and does not upload your projects or files. What your AI reads through CadKit (the guide, reports, images of the model) goes to your AI provider, as everything else in that chat. The network connections CadKit itself makes are listed in SECURITY.md.
What CadKit generates is yours
Everything you design with CadKit belongs to you: your models, your project code, the reports, dashboards, drawings and packages. You may print, share, sell and publish them under any terms you like — MakerWorld and similar platforms included. The project templates and the 3D viewer that CadKit embeds in a dashboard are licensed under MIT-0 for exactly that reason (see NOTICE).
Feedback and problems
There is no support promise: CadKit is a one-person project. Bug reports
and ideas are welcome as
issues. The project folder
(zipped, or cadkit support-bundle) helps a lot. Copy this into the issue
and fill it in:
Build: (cadkit --version, or the About/Update tab)
AI app and model: (e.g. Claude Desktop, Sonnet)
Printer, nozzle, filament, slicer:
What I asked the AI:
What I expected:
What happened: (exit code, the red or stop row, an error text)
Last step that worked:For a print problem, also a photo and what you measured.
Security problems never go into a public issue — see SECURITY.md.
Worth telling: where the AI got stuck, where it asked you something it should have known, where a green part did not fit or print, and where the CadKit window confused you. How to contribute code: CONTRIBUTING.md.
Supporting CadKit
CadKit is free. If it saved you a few failed prints and you want to give something back: GitHub Sponsors. Sponsoring buys nothing — no features, no support — it just helps.
Licence
CadKit is free software under the
GNU General Public License, version 3 or later. The project
templates and the viewer embedded in generated output are MIT-0; details
and attributions are in NOTICE. The Windows installer bundles
open-source components; their licences are in THIRD-PARTY-NOTICES.txt
next to the installer and in the program folder.
Tool Schema Changelog
Recent tool additions, removals, and schema changes observed during successful MCP inspections.
Loading tool schema changelog…
Related MCP Connectors
Parametric 3D CAD for AI agents: build print-ready parts, check them, export STL, 3MF or STEP.
CAD in ChatGPT and Claude: editable parts, STEP/STL/drawings, in-chat 3D, automatic checks.
3D printing: printable models, calculators, troubleshooting wiki, build guides, AI 3D + CAD design.
Text-to-CAD: build exact STEP or 3MF/STL on the server, each stated requirement measured.
Related MCP Servers
- AlicenseNot gradedqualityNot gradedmaintenanceProvides end-to-end 3D printing automation for Bambu Lab printers, allowing users to generate, slice, and monitor prints using natural language. It features model generation from text or images, real-time camera monitoring, and automated print quality improvement.MIT
- AlicenseAqualityBmaintenanceEnables generating parametric 3D-printable parts from OpenSCAD/CadQuery models, exporting STL/3MF files, running DFM checks, and retrieving Bambu X1 Carbon starting profile notes.8MIT
- AlicenseNot gradedqualityBmaintenanceEnables AI agents to design, modify, and verify exact B-rep 3D CAD models by running build123d scripts on an OpenCascade kernel, with live three.js preview, collision and FDM printability checks, text-based spatial perception, user notes/sketch annotations, version history, and one-click export to OrcaSlicer.1MIT
- AlicenseAqualityBmaintenanceEnables MCP clients to design, verify, and export FDM 3D-printable parts by running model-written build123d scripts in a sandbox, rendering previews and cross-sections, running print checks, and exporting STEP, STL, 3MF, or PNG. It supports workflows from photos or caliper readings to finished part files through natural language.35131 PyPI3MIT