telemcp

An MCP server that gives AI assistants read-only access to your personal Telegram account. It connects via MTProto (as a regular client, not a bot), enforces a whitelist of allowed chats, and never marks messages as read.

Typical use cases:

• "Summarize unread messages in the XXXXXX folder."

• "What errors appeared in this log channel in the last 24 hours?" (given a t.me link or name)

Requirements

• Python 3.8+

• A Telegram account

• Telegram API credentials (see below)

Related MCP server: MCP Telegram

Installation

Using pipx (recommended for end users):

pipx installs CLI tools into isolated environments and makes them available globally.

pipx install git+https://github.com/ashtokalo/telemcp.git

After this, telemcp, telemcp-auth, and telemcp-test are available system-wide. To upgrade to the latest version:

pipx upgrade telemcp

Using pip:

pip install git+https://github.com/ashtokalo/telemcp.git

On most modern Linux distributions and macOS, system Python is managed externally and pip install into the system environment is blocked. Use a virtual environment or pipx.

From source (for development):

git clone https://github.com/ashtokalo/telemcp.git
cd telemcp
make configure

This creates .venv and installs the package in editable mode including dev tools.

API credentials

Telegram requires an api_id and api_hash to identify the client application. You can get your own for free at https://my.telegram.org - go to "API development tools" and create an application. The name and platform do not matter.

If you leave api_id and api_hash empty in the config, the server falls back to Telegram Desktop's public credentials. This works but carries a small risk: Telegram may flag or restrict the session if its behavior does not match the real Desktop client. For low-volume personal use the risk is minimal. The server prints a warning on startup when using the fallback credentials.

Setup

1. Create a config file.

Copy config.example.json from the repository, or create ~/.telemcp/config.json manually using the template from the Configuration reference section below.

2. Authenticate once. This connects to Telegram and saves the session to disk. After this step, the session file handles all authentication automatically.

Two login methods are available:

Phone + code - Telegram sends a confirmation code to your other devices:

telemcp auth

Enter your phone number with country code (e.g. +79001234567) and the code that arrives in Telegram. If two-factor authentication is enabled, it also asks for the password.

QR code - no SMS or code needed; scan with an existing Telegram client:

telemcp auth --qr

A QR code is printed to the terminal. On your phone or desktop Telegram, go to Settings -> Devices -> Link Desktop Device, then scan the code. If two-factor authentication is enabled, it prompts for the password after scanning.

Use telemcp auth --qr if codes sent to your devices are not arriving, or to avoid phone-based verification.

To see full Telethon protocol logs during auth (useful for debugging):

telemcp auth --verbose

3. Verify the connection. After authentication, run the smoke test to confirm everything works:

telemcp connection

It connects to Telegram, prints all folders and the first 15 dialogs, and if a whitelist is configured, also shows dialogs passing the whitelist filter. A successful run looks like:

Connecting to Telegram...
OK

Folders:
   2  Family
   5  Work

First 15 dialogs (no whitelist filter):
      -1001234567890  supergroup   Team Chat  [3 unread]
             9876543  user         John Smith
  ...

4. Configure the whitelist. Start the server and use tg_list_folders and tg_list_dialogs to find the IDs of the folders and chats you want to allow, then add them to config.json.

5. Register the server in your MCP client.

Via Claude Code CLI (simplest):

claude mcp add telegram -- telemcp --config config.json

Or manually in .mcp.json:

{
  "mcpServers": {
    "telegram": {
      "command": "telemcp",
      "args": ["--config", "~/.telemcp/config.json"]
    }
  }
}

Config file lookup order

When --config is a relative path (or omitted, defaulting to config.json), the server resolves it in this order:

1. Next to the script itself: <telemcp dir>/config.json

2. In the user config directory: ~/.telemcp/config.json

If neither location has the file, the server exits with an error. Absolute paths bypass this lookup and are used as-is.

Configuration reference

All fields are optional except as noted.

{
  "api_id": 12345,
  "api_hash": "abcdef1234567890abcdef1234567890",

  "session_file": "~/.telemcp/session",

  "whitelist": {
    "folders":  [2, 5],
    "groups":   [-1001234567890, "@some_channel"],
    "accounts": [123456789, "@friend"]
  },

  "proxy": {
    "type":     "socks5",
    "host":     "127.0.0.1",
    "port":     1080,
    "username": null,
    "password": null
  }
}

api_id, api_hash

Your Telegram application credentials from https://my.telegram.org. Set to null or omit to use the Telegram Desktop fallback (see above).

session_file

Path to the Telethon session file. Created by telemcp auth. Supports ~ expansion. Default: ~/.telemcp/session.

whitelist

Controls which chats the server will read from.

• folders - list of Telegram folder IDs. All chats inside the folder are allowed.

• groups - list of group or channel identifiers (numeric IDs or @usernames).

• accounts - list of user identifiers for private conversations (numeric IDs or @usernames).

Numeric group and channel IDs are negative (e.g. -1001234567890). Use tg_list_folders and tg_list_dialogs to find IDs.

When the whitelist is empty, tg_list_folders and tg_list_dialogs still work (so you can discover IDs), but tg_get_messages and tg_get_unread_summary will refuse all requests.

proxy

Optional. Supported types:

SOCKS5 or SOCKS4:

"proxy": {
  "type":     "socks5",
  "host":     "127.0.0.1",
  "port":     1080,
  "username": null,
  "password": null
}

HTTP:

"proxy": {
  "type": "http",
  "host": "proxy.example.com",
  "port": 8080,
  "username": null,
  "password": null
}

MTProto proxy:

"proxy": {
  "type":   "mtproto",
  "host":   "proxy.example.com",
  "port":   443,
  "secret": "dd1234abcdef..."
}

Set to null to connect directly.

Session encryption

By default, the Telethon session is stored as a plain SQLite file on disk. To encrypt it, set the TELEMCP_PINCODE environment variable before running telemcp auth and the server.

export TELEMCP_PINCODE="your-passphrase"
telemcp auth          # or telemcp auth --qr

When the variable is set:

• telemcp auth exports the session as a string, encrypts it with Fernet (AES-128-CBC + HMAC-SHA256, key derived via PBKDF2-HMAC-SHA256 with 200 000 iterations), and saves it to <session_file>.enc. The plain SQLite file is deleted.

• The server loads the encrypted file into memory on startup and saves it back on shutdown. The plain session file is never written to disk.

The .enc file is useless without the passphrase.

If TELEMCP_PINCODE is not set, the server falls back to the plain SQLite session with no change in behavior.

Passing the pin to Claude Code

In .mcp.json, use the env field:

{
  "mcpServers": {
    "telegram": {
      "command": "/path/to/telemcp/telemcp.sh",
      "args": ["--config", "/path/to/telemcp/config.json"],
      "env": {
        "TELEMCP_PINCODE": "your-passphrase"
      }
    }
  }
}

Via CLI (claude mcp add does not support env directly — edit .mcp.json after adding):

claude mcp add telegram telemcp --config ~/.telemcp/config.json
# then open .mcp.json and add the "env" block manually

Running tests

Tests are intended for development. Clone the repo, then:

make configure
make test

Tests cover config loading and path resolution, whitelist filtering, session encryption round-trips, and URL/chat-ref parsing. They run without a Telegram connection.

To run a specific file or test:

.venv/bin/pytest tests/test_session.py -v
.venv/bin/pytest tests/ -k "wrong_pin" -v

Available tools

tg_list_folders

Returns all Telegram folder filters (the custom tabs in the sidebar) with their IDs and names. Use the IDs to populate whitelist.folders in the config.

tg_list_dialogs

Returns accessible dialogs (chats, groups, channels) with ID, name, type, unread count, and last message date. Respects the whitelist when configured; returns all dialogs when the whitelist is empty, which is useful for initial setup.

Optional parameter: folder_id - limit results to a specific folder.

tg_get_messages

Reads messages from a single chat. Never marks them as read. The chat must be in the whitelist.

Parameters:

Accepted chat_ref formats:

• -1001668839992 - numeric channel ID

• @username - public username

• https://t.me/c/1668839992/5699 - private channel link (message ID is ignored, only the channel ID is used)

• https://t.me/username - public channel link

tg_get_unread_summary

Returns a digest of unread messages across all whitelisted chats. For each chat with unread messages, returns the most recent N messages. Does not mark anything as read.

Optional parameters:

• folder_id - scope to a specific folder

• max_messages_per_chat - messages per chat (default: 20)

What this server does not do

• Send messages

• Mark messages as read

• Download media files (text and captions only)

• Edit or delete messages

• Manage contacts, groups, or channels