Skip to main content
Glama

Electroscope connects your USB microscope to an agent that supports MCP, including Claude Code and Codex. You keep a live view of the board while the agent takes snapshots, inspects close-ups, and draws marks on the picture.

Instead of “the little component on the left,” your agent can circle the component, put a crosshair on a test point, or draw an arrow to the pin it wants you to probe. You can draw back to show exactly where you measured. You handle the probes and measurements; Electroscope makes the visual conversation precise.

Electroscope showing a real circuit board with example circles, arrows, crosshairs, and labels, and the connected agent listed beside it

Example marks on a real microscope image. Both you and the agent can add annotations to the same view.

A second pair of eyes at your bench

  • Inspect together. Ask the agent to look at solder joints, read visible markings, or compare a detail before and after rework.

  • Make the next probe location clear. Circles, arrows, crosshairs, boxes, and text turn “measure here” into a specific place on the board.

  • Keep the detail. The agent can request a full-resolution crop, follow your zoomed view, or take a sequence of stills.

  • Stay in control. Zoom, pan, rotate, mirror, freeze, add a grid, draw your own marks, and save photos while the camera stays open.

  • See what the agent is doing. Connected agents are listed by name, and a running feed shows what each one did, with a thumbnail of the frames it took.

  • Work across your bench. Run the microscope on one computer and connect an agent from another computer on the same trusted network.

Electroscope zoomed into a circuit board with a grid and crosshair, in the light theme

Zoom into the detail you are discussing. The agent can capture that same region without losing the original camera pixels.

Related MCP server: so-dsc

Get started

  1. Install Electroscope using a download above. On Mac, open the DMG and drag Electroscope into Applications. On Windows, run the installer or use the portable app.

  2. Plug in your USB microscope and open Electroscope. Allow camera access and select the microscope in the camera list.

  3. Click “Copy prompt for agent.” Paste it into Claude Code, Codex, or another MCP-capable agent. It contains your camera server’s address, connection instructions, and available tools.

  4. Start looking at the board together. Ask for a fresh image, describe the fault, and share your measurements as you go.

Try a prompt like:

Look at this board. Circle any solder joints worth inspecting more closely, and explain what you see.

Mark the pin you mean before I put the probe on it.

I measured 3.3 V at the point I marked. Take another look and suggest the next measurement.

Your agent’s own service or subscription still applies; Electroscope needs no account. It shares still images on request while you watch the live camera view.

Connect your agent

Copy prompt for agent is the quickest way to get the correct address. For Claude Code, you can also add the server directly:

claude mcp add --transport http electroscope http://<microscope-computer-ip>:7821/mcp

For Codex or another MCP client, add the Streamable HTTP MCP URL shown in Electroscope’s title bar. Use the displayed URL: the port can change if the default is busy.

Agents can take snapshots and sequences, annotate the image, adjust the on-screen view, choose a camera, save photos, brighten or add contrast to the picture, and change hardware controls where the camera supports them. Read the full tool reference →

Your camera, your network

Electroscope serves the camera from your computer. Network access is on by default and has no password, so use it on a trusted network. To keep access on the same computer, turn off Let other computers on the network connect in Settings.

If another app has the microscope open, close that app; Electroscope retries automatically.

Picture sliders — brightness, contrast, saturation — are Electroscope’s own processing, so they work on any camera on either platform, and captures get them too.

Camera controls appear only for things the camera and the operating system really support, which is often nothing at all: macOS exposes at most zoom, pan and tilt over USB video, and many inexpensive UVC cameras accept settings and ignore them. Electroscope tests each control when the camera opens, hides the ones that do nothing, and says why when there are none. What a USB microscope can actually do →

Focus on these microscopes is mechanical: turn the ring until the live focus meter peaks.

Contribute

Want to build from source, report a problem, or improve a tool? See the development guide, release workflow, or open an issue.

Made by UnlikeOtherAI. MIT licensed.

Tool Schema Changelog

Recent tool additions, removals, and schema changes observed during successful MCP inspections.

Loading tool schema changelog…

    Related MCP Connectors

    Related MCP Servers