ibara
Runs browser tasks in the spare computer's own Chrome/Chromium session, allowing agents to navigate pages, interact with web apps via mouse and keyboard, and capture screenshots.
Controls the Omarchy Hyprland desktop and bar on the spare computer, enabling screen viewing, mouse and keyboard input, and interaction with desktop apps.
Connects the user's computers over their own Tailscale network, enabling encrypted transfer of screenshots, files, and commands between the agent-controlled spare computer and the console.
This server does not currently have a deployable release on Glama. Follow the repository's setup instructions to install and configure it for your MCP client, including any required credentials and local dependencies.
ibara
Computer use for agents on Omarchy.
Give your agent a spare computer while you keep working on yours. It can use the spare’s desktop, browser and apps.
ibara runs in Omarchy’s bar. Its console shows your connected computers, their screens and their tasks. You can send files, collect results and take control.
Website · User guide · Release notes · Roadmap

ibara is free and open source. It works on Omarchy computers and Omarchy virtual machines. Your computers connect through your own Tailscale network.
Before you start
For the setup below, you need:
2 computers running Omarchy on x86_64 hardware, with its Hyprland desktop and bar
a Tailscale account, signed in on both computers
your own account with sudo access on each computer
an agent that supports Model Context Protocol (MCP), such as Codex or Claude Code
Google Chrome or Chromium on the spare for browser tasks
Either computer can be a virtual machine. The spare does not need a connected mouse or monitor. ibara creates a virtual screen when needed.
Only Omarchy is supported. No other platform is planned. The Ubuntu packages from 0.3.0 and 0.3.1 are historical and no longer receive updates.
The 3 Omarchy packages for release 0.3.1-1 total about 52.3 MB to download, excluding additional dependencies. The installer installs dependencies for you.
Related MCP server: rustdesk-mcp-bridge
Install and connect your computers
Run this command on each computer, as your own user rather than root.
(set -eu; umask 077; installer=$(mktemp); trap 'rm -f "$installer"' EXIT; trap 'exit 1' HUP INT TERM; curl -fsSL --proto '=https' --proto-redir '=https' --connect-timeout 15 --max-time 180 https://github.com/MayberryDT/ibara/releases/download/v0.3.4/install -o "$installer"; printf '%s %s\n' 92591da2459f18da47b6567d47cb66c0b16b988d4752fa88ec67283021a03fbe "$installer" | sha256sum -c -; sh "$installer")Follow the setup prompts. Setup asks for your password and adds the ibara icon to your bar.
On your everyday computer, right-click the ibara icon to open the console.
Choose Add Computer, then select the spare.
The command verifies the pinned 0.3.4 bootstrap installer before executing it; download or checksum failures stop installation. The authenticated installer downloads the latest signed release. It checks the release signature and package checksums before installing ibara, ibara-stream and ibara-view.
Your own computers can pair in one step when they use the same Tailscale login and neither computer is tagged. Other pairings need confirmation.
The pairing guide explains those cases. You can also verify a release before installing it.
Connect your agent
In the console, choose Connect an Agent, then Copy Prompt.
Paste the prompt into your agent and let it complete the setup.
Restart the agent if it needs to reload its tools. Ask it to list your ibara computers.
You can also print the connection prompt from a terminal:
ibara promptThe prompt tells your agent to add the ibara MCP server, link its skill and add instructions for future sessions.
We have tested Codex, Claude Code, opencode and omp. Other agents need MCP support. The agent connection reference explains manual setup.
Run your first task
Replace spare-mini with your spare’s name, then paste this into your agent:
On spare-mini, open https://ibara.app/practice.
Check the Settings menu with the mouse and keyboard.
Take a screenshot with the menu open.
Tell me which checks passed or failed.
Do not change system settings.
Finish the task and release the computer when you are done.The practice page needs no sign-in. Watch the spare in the console, then check the screenshot against the report.
The result should include:
a pass or fail for each check
a screenshot showing the open menu
confirmation that the task ended and the computer was released
The first-task guide explains how to collect files and check your own app next.

Use ibara for your work
Give your agent a specific task and ask for evidence. For example, ask it to:
check a web app with the mouse and keyboard, then report failures with screenshots
edit a document, save it, reopen it and check the saved contents
collect information from a page and return a report or file
A local development server must be reachable from the spare. Use a staging URL or your computer’s Tailscale address, rather than localhost.
The spare has its own browser session. Signing in on your everyday computer does not sign you in there. Follow the agent’s sign-in request or take control to sign in yourself.
Need help with setup? Paid setup and support is optional. The software remains free.
Watch and take control
Open a computer in the console to watch its screen, follow tasks and read its history. Drop files onto its card to send them.
Choose Take Control to use its keyboard and mouse through the viewer. This pauses agents while you use the computer.
Choose Hand Back when you finish. Closing the viewer alone does not hand control back. Ask your agent to continue if its task ended.
You can manage each computer’s permissions in the Access tab. You can also share a computer through an invite that expires or that you revoke.
The access and control guide explains permissions, invitations and taking a computer back from an agent.
Privacy and access limits
Pictures, files and commands pass between your computers over Tailscale’s encrypted network. You do not need an ibara account.
Your agent may send screenshots, text and file contents to its model provider. What leaves your computers depends on the agent and model you use.
ibara also records local, content-free operational diagnostics. Uploading those diagnostics is optional, requires a separately configured archive and credential, and is not enabled by installation. See recording and its limits.
ibara checks for signed releases when you install or update it. Release 0.3.1 includes an optional uploader for diagnostic records. It stays off unless you enable it.
By default, recognized sending, spending, deleting and access changes need approval. You can change approval settings for your own agents.
Approvals cannot cover every action. ibara cannot always tell what a command or click will do. Agents are not confined to an isolated environment.
Give access only to agents you trust with that computer. Read the approval limits before using sensitive accounts or files.
Releases and test results
Release 0.3.1-1 improves desktop input, browser discovery, cleanup and console recovery. It includes reading pages inside iframes and shadow roots.
The release passed package checks and focused desktop tests. Its longer test campaign did not achieve 2 consecutive clean runs per operating system.
Recorded failures include Writer focus problems, partial typing, workbook errors and incomplete checks after reopening files. See the 0.3.1-1 release notes for scope and limitations.
The September 2026 benchmark passed 132 of 157 runs on 0.1.0-17. That is a historical result, not a success rate for today’s release.
The September results retain every published table, including failures. The benchmark archive lists other campaigns and their methods.
The roadmap describes planned work. Source changes on this repository’s main branch may not be in the latest package.
Update or remove ibara
Use these commands on the computer you want to change:
Task | Command |
Show the installed version |
|
Check for an update |
|
Install the latest signed release |
|
Restore the previous release, if available |
|
Remove ibara but keep its identity and history |
|
To remove identity, pairings, history and viewer settings too, use ibara uninstall --delete-data. Files you received remain in ~/Downloads/Ibara.
The separate cua-driver-bin package stays installed because other software may use it. Remove each agent’s ibara server, skill link and instruction block separately.
See the removal details before deleting data.
Get help and read the technical guides
If something fails, start with troubleshooting. If you still need help, report a problem.
Use these guides for more detail:
architecture explains the services, network connections and stored data
agent tools describes the MCP tools and their results
computer use on Linux compares the built-in computer use of common coding agents
compositor settings explains optional Hypoland input and its reduced safeguards
development explains building and checking the source
internals describes the implementation
security reporting explains how to report a vulnerability privately
Credits and licenses
ibara’s core and Omarchy console plugin use the MIT license. The console has its own repository for Omarchy’s plugin marketplace.
Cua provides the desktop driver and Hyprland plugin. Release 0.3.1 bundles Cua 0.34.1. The vendored plugin changes retain their MIT license and notices.
Take Control uses separate GPL-3.0 programs:
ibara-streamis a Sunshine fork that accepts a viewer through a single-use ticketibara-viewis a Moonlight fork with keyboard handover, file drop and its own viewer identity
The fork details explain how these programs differ from their upstream projects. The forks are included in the release source archive. The release downloads include their source, dependencies and changes alongside the core and console source.
ibara also depends on Omarchy, Hyprland and Tailscale.
Report bugs and suggest changes
Bug reports and suggestions are welcome. Tyler maintains ibara and does not merge outside contributions directly.
You can submit a pull request to demonstrate a proposed fix. Tyler uses Claude or Codex to review submissions and decides which changes to make independently.
Read the contribution policy before spending time on a patch.
Omarchy plugin updates
Fresh core setups link the bundled console plugin. If you installed the plugin through Marketplace, core setup preserves that copy; update it through Marketplace. Core 0.3.4 includes the notification privacy fix. Older core releases can replace a corrected Marketplace copy with an older bundle: update core before running setup again.
Tool Schema Changelog
Recent tool additions, removals, and schema changes observed during successful MCP inspections.
Loading tool schema changelog…
This server cannot be deployed
Maintenance
Related MCP Connectors
Give your AI hands on every computer you own. Remote control of your Windows, Mac and Linux machines from one ChatGPT, Claude or Cursor chat — even from your phone. Ask it to find out why the office server is crawling, update every PC in the house, sort out your mom's laptop from another city, or ship the site from your work machine while you're on a train. It runs commands, reads files and takes a screenshot when it needs to see the screen. You decide what each computer allows, and you can cut any of them off in a second.
Securely control computers you explicitly pair through files, terminals, processes, screenshots, desktop UI/input, clipboard, browser automation, diagnostics, and document tools.
Use a person's computer after they approve it there: files, Terminal, browser, local MCP.
Use a person's computer after they approve it there: files, Terminal, browser, local MCP.
Related MCP Servers
- AlicenseNot gradedqualityCmaintenanceEnables MCP clients to securely inspect and control registered Windows PCs over a private Tailscale network, with risk-based approvals for actions such as launching apps, capturing screens, managing files, and simulating input.Apache 2.0
- AlicenseNot gradedqualityBmaintenanceEnables AI agents to control remote desktops through screen capture, mouse movement, and keyboard input.MIT
- AlicenseNot gradedqualityBmaintenanceEnables AI assistants like Claude, Codex and ChatGPT to actually operate a computer — finding files, running commands, taking screenshots and driving a browser — and, after a one-time pairing, to help on family members' computers anywhere. Connections between machines are end-to-end encrypted through a relay, requiring no VPN, port forwarding or router setup.1MIT
- AlicenseNot gradedqualityBmaintenanceEnables an AI agent to inspect and operate a remote Windows machine over a private tailnet, listing and reading files, transferring and mutating them within a configured sandbox root, capturing screenshots, and — only when explicitly double-opted-in — executing commands and sending keystrokes. It runs self-hosted with no third-party client or vendor cloud in the session path, and reports its live policy rather than asserting its own safety.MIT