autoshop
Server Configuration
Describes the environment variables required to run the server.
| Name | Required | Description | Default |
|---|---|---|---|
| AUTOSHOP_MFC_PATH | No | Optional path to specify for checking mfc90.dll, defaults to auto-detection | |
| AUTOSHOP_INSTALL_DIR | Yes | The installation directory of AutoShop, e.g., C:\Program Files (x86)\AutoShop |
Instructions
Guidance the server publishes about itself, which clients place ahead of the tool catalog so the model reads it before choosing anything.
This server publishes no instructions, or was last inspected before Glama recorded them.
Capabilities
Features and capabilities supported by this server
Protocol revision2025-11-25
| Capability | Details |
|---|---|
| tools | {
"listChanged": false
} |
| experimental | {} |
Tools
Functions exposed to the LLM to take actions
| Name | Description |
|---|---|
| capabilitiesA | 工具清单、支持格式矩阵、限制与原生运行库状态。 |
| project_inspectB | 列出工程机型、POU/文件类型、每个文件的 SHA256、支持级别与派生表。 |
| il_readA | 读取纯明文 .IL POU 的 IL 源码文本（LF 换行，GBK 解码）。 |
| il_patch_copyB | 在不改动源工程的前提下，生成打了唯一匹配文本补丁的新工程副本，并把失效缓存/陈旧产物移入隔离区。 |
| project_diffA | 对比两个工程目录：新增/删除/改动文件、IL 文本 diff、配置与索引变化。 |
| package_projectA | 打包源码与配置（排除派生表/陈旧编译结果），输出 ZIP 与 SHA256/CRC32 清单。 |
| native_compile_probeA | 静态读取 PE 证据/安装目录，报告架构、SHA256 与编译相关导出；不执行 DLL、不假编译。 |
| native_compile_copyA | 在全新副本中调用原厂 x86 DLL 编译 H3U IL/LD；校验完整覆盖、稳定产物和配置不变，成功后输出工程 ZIP。无需 GUI，不连接 PLC。 |
| ld_to_il_copyA | 调用原厂接口将指定 LD 转成可编辑 IL，仅转换前后编译产物逐字节一致时交付新副本。无需 GUI。 |
| il_to_ld_copyA | 原厂 IL 转梯形图；独立回读 IL、清缓存编译并要求机器码一致后交付。 |
| symbols_readA | 原厂接口读取全局符号名称、地址、注释；只在工程副本中运行。 |
| symbols_patch_copyA | 新增或修改全局符号，独立进程回读并要求前后机器码一致；只交付新副本。 |
| project_searchA | 搜索已登记 IL 的字面文本，返回文件、行号和上下文；明确未覆盖的 LD/保护块。 |
| project_xrefA | 列出显式软元件地址的指令和读写分类；范围、隐式双字和间接地址不作完整性保证。 |
| project_auditA | 静态检查缺失文件、多处 OUT、跨块写入和未知指令；不是运行仿真或逻辑合格证明。 |
| project_exportB | 导出 UTF-8 IL 文本、哈希、引用和静态检查 JSON 到新目录，供审查。 |
| il_batch_patch_copyA | 一次核对多文件、多处非重叠补丁；成功才发布副本，隔离旧产物并核对其余文件。 |
| project_convert_all_copyA | 将工程内全部 LD 依次转成 IL，每次验证机器码等价，最后统一编译交付。 |
| project_build_copyA | 可选全部 LD 转换、多文件补丁、原厂编译和打包的一次调用；失败不发布中间工程。 |
Prompts
Interactive templates invoked by user choice
| Name | Description |
|---|---|
No prompts | |
Resources
Contextual data attached and managed by the client
| Name | Description |
|---|---|
No resources | |
TDQS
Scored across 19 tools
Each tool has a clearly distinct purpose—read, patch, convert, compile, inspect, etc.—with no overlapping functionality. Even the copy variants are differentiated by their operation (IL-to-LD, LD-to-IL, patch, batch patch, convert-all, build).
Names use underscores and lowercase but mix conventions: some are verb-noun (package_project), some noun-verb (project_search), and others are compound phrases (il_batch_patch_copy). The pattern is not uniform but still readable.
19 tools is on the higher side but fits the server's comprehensive scope of PLC code manipulation, offering both granular operations and a combined build tool. The count is justified, though it approaches the heavy range.
The toolset covers reading, patching, converting, compiling, inspecting, searching, auditing, exporting, diffing, and packaging. Minor gaps exist (e.g., no delete/restore), but core workflows for IL/LD conversion and patching are fully covered.