Home Controller

# Home Controller Slash Commands Quick access commands for managing your Miele, LG, and HUUM Sauna appliances through Claude Code. ## 🏠 All Devices ### `/home-status` Complete overview of ALL appliances (Miele + LG + HUUM) - Shows every device with current status - Temperatures, running programs, alerts - Your daily "everything at a glance" command ### `/check-alerts` Check for notifications across all devices - Completed cycles - Error messages or alerts - Things that need attention - Shows "All clear!" if nothing needs action --- ## 🧺 LG Appliances (Laundry) ### `/laundry-status` Quick check on washers and dryers - Current state (running, idle, finished) - Time remaining if running - Current cycle/program - Any alerts or issues ### `/start-washer` Show washer information - Which washers you have - Current status of each - Available programs/cycles - **Note:** Use natural language to actually start: "start washer on delicate" ### `/start-dryer` Show dryer information - Which dryers you have - Current status of each - Available programs/settings - **Note:** Use natural language to actually start: "start dryer on normal" --- ## 🔥 Miele Appliances (Kitchen) ### `/miele-status` Quick status of all Miele devices - Oven (H7263BP) - Refrigerator (KS 7793 D) - Freezer (FNS 7794 E) - Brief summary of each ### `/kitchen-status` Check all kitchen appliances - Oven: On/off, temperature, program - Refrigerator: Current & target temps - Freezer: Temperature, alerts - Perfect for morning/evening checks ### `/oven-status` Quick oven check - Is it on or off? - Current temperature - Running program - Remote control status ### `/fridge-status` Refrigerator and freezer temperatures - Fridge: Current temp, target temp, status - Freezer: Current temp, target temp, alerts - Quick temp check ### `/freezer-check` Focused freezer check (especially alerts) - Current temperature - Any alerts or notifications - Door status - Quick "is everything OK?" check --- ## 🧖 HUUM Sauna ### `/sauna-status` Check sauna temperature and status - Current temperature (°C) - Target temperature if heating - Heater on/off status - Door state (open/closed) - Light status - Perfect before heading to the sauna! ### `/start-sauna` Show sauna information and guide - Current sauna state - Door status (must be closed to start) - Safety reminders - **Note:** Use natural language to actually start: "heat sauna to 80 degrees" ### `/stop-sauna` Turn off the sauna - Stops the heater - Confirms sauna is powering down - Use when you're done or to cancel heating --- ## 📋 Command Categories ### Morning Routine ``` /home-status → Everything at once /check-alerts → Any overnight issues? /kitchen-status → Kitchen appliances check ``` ### Before Cooking ``` /oven-status → Is oven ready? /kitchen-status → Overall kitchen check ``` ### Laundry Day ``` /laundry-status → Check washer/dryer /start-washer → See washer info /start-dryer → See dryer info ``` ### Temperature Monitoring ``` /fridge-status → Temps for fridge & freezer /freezer-check → Quick freezer check ``` ### Sauna Time ``` /sauna-status → Check temperature & status /start-sauna → See sauna info & guide /stop-sauna → Turn off sauna ``` ### Complete Overview ``` /home-status → Absolutely everything /miele-status → Just Miele devices /laundry-status → Just LG devices ``` --- ## 💡 Usage Tips ### Commands Are Quick Checks All slash commands are designed for **fast, read-only information**. They require minimal approvals. ### Use Natural Language for Control For actually controlling devices: - ❌ Don't use: `/start-washer` then navigate menus - ✅ Do use: "start washer on delicate cycle" ### Combine for Efficiency Instead of multiple commands: - ❌ Slow: `/laundry-status` then `/kitchen-status` - ✅ Fast: `/home-status` (gets both) ### Create Your Own Routines You can ask naturally: - "Morning check" → Claude will check everything - "Kitchen ready?" → Check kitchen appliances - "Laundry update" → Check laundry status --- ## 🎯 Quick Reference **Most Used Commands:** ``` /home-status → Everything /laundry-status → Washer & dryer /kitchen-status → Kitchen appliances /sauna-status → Sauna temperature & status /check-alerts → Notifications ``` **Specific Devices:** ``` /oven-status → Oven only /fridge-status → Fridge & freezer temps /freezer-check → Freezer + alerts /sauna-status → Sauna check ``` **Device Info (for starting):** ``` /start-washer → Show washer options /start-dryer → Show dryer options /start-sauna → Show sauna info & guide ``` **Device Control:** ``` /stop-sauna → Turn off sauna ``` --- ## 🔧 Adding More Commands To create a new command: 1. Create a new `.md` file in this directory 2. Add frontmatter with `name` and `description` 3. Write the prompt/instructions 4. Restart Claude Code to load it **Example:** ```markdown --- name: my-command description: What this command does --- Your command instructions here... ``` --- ## 📞 Need Help? - **Full Guide:** See `INSTRUCTIONS.md` - **Quick Start:** See `QUICK-START.md` - **Setup Info:** Check `README.md` Just ask: "Help me with slash commands"