Skip to main content
Glama

Future Micro Mold Lab

Server Details

Scientific-molding calculators: viscosity curve, gate seal, cavity balance, Cpk and gage R&R.

If you are the author of this connector, you can claim ownership by verifying the domain or GitHub account it belongs to. Claimed connector authors can inspect health checks, view analytics, and manage their listing.
Status
Healthy
Uptime
100.0% over the last 24 hours
Last Tested
Transport
Streamable HTTP · MCP 2025-11-25
URL
ChatGPT
–
Claude
–

TDQS

A3.8/5.0

Scored across 11 tools

Disambiguation4/5

Each of the eight study tools maps to a clearly different molding study (fill balance across cavities vs. pressure consumption along the flow path vs. gate freeze hold time vs. cooling vs. cosmetic DOE vs. measurement systems vs. capability), so an agent can select correctly from the descriptions. The only soft overlap is get_study_protocol vs. open_study_sheet, which both surface a procedure, but one is read-only reference and the other is interactive data entry.

Naming Consistency4/5

All names are lower snake_case with no style mixing, and the split is semantically predictable: eight noun-phrase study names (viscosity_curve, gate_seal, gage_rr) and three verb-first helpers (get_study_protocol, open_study_sheet, plan_process_development). The verb/noun split tracks the study-vs-helper distinction rather than being arbitrary, so it is only a minor deviation from a single pattern.

Tool Count5/5

Eleven tools is well within a healthy range and each one is a distinct stage or support function in a molding development workflow. Nothing looks redundant or padded; the helpers exist because the studies need protocols and sequencing.

Completeness4/5

The set covers the full ordered development chain end to end: velocity selection, pressure drop, gate seal, cooling, cavity balance, cosmetic window, gage R&R, and capability, plus planning and protocol retrieval. The gap is persistence — there is no tool to save, list, or compare previously collected study data, so plan_process_development's notion of 'studies already run' has no visible source of truth.

Available Tools

11 tools
cavity_balanceCavity balance studyA
Read-onlyIdempotent
Inspect

Quantify cavity-to-cavity fill imbalance from short-shot weights. Give two or more replicate shots at a fill level and the result also says whether the variation comes from the cavities (runner and gate geometry) or from shot-to-shot process drift — the two have opposite fixes. Judge balance on a short shot at 90% fill or above.

Inputs: levels, context, study_code.

cooling_timeCooling-time studyB
Read-onlyIdempotent
Inspect

Find the shortest cooling time at which a dimension has stopped changing, and the cycle seconds that come off. Supply the drawing tolerance and the rule tightens to a tenth of it. Measure each part at a consistent interval after ejection — the part keeps moving.

Inputs: points, context, study_code, dimensionName, +1 more.

cosmetic_windowCosmetic process-window studyA
Read-onlyIdempotent
Inspect

Map which combinations of two process parameters produce a cosmetically acceptable part, and how much room surrounds the centre. Sweep wider than you expect the window to be: a passing point on the edge of the range tested means the window was never closed on that side. Axes and their units: hold_pressure (psi), melt_temp (°C), mold_temp (°C), injection_velocity (in/s), hold_time (s), cooling_time (s). Defects: short, flash, sink, burn, splay, weld-line, drag, warp.

Inputs: xAxis, yAxis, points, context, +1 more.

gage_rrGage R&R (crossed, ANOVA method)A
Read-onlyIdempotent
Inspect

Rate a measurement system from a crossed study: every operator measures every part, the same number of times. Two-way ANOVA per the AIAG Measurement Systems Analysis manual (4th ed.), matching Minitab's crossed gage R&R defaults: the operator × part interaction is pooled into repeatability when not significant (α = 0.05). Reports %GRR of study variation and, when a tolerance is given, of the tolerance, the repeatability / reproducibility split, the number of distinct categories, and the AIAG band (under 10% acceptable, 10–30% conditional, over 30% unacceptable). The standard study is 10 parts, 3 operators, 2–3 trials. Run it before trusting a Cpk.

Inputs: context, operators, tolerance, study_code.

gate_sealGate-seal studyB
Read-onlyIdempotent
Inspect

Find the hold time at which the gate freezes and part weight stops rising. Seal is the first of three consecutive weights within 0.1% of each other; the recommended production hold time adds a margin of one increment. A weight that falls back after seal means the gate did not stay frozen. Run at the velocity the viscosity curve selected.

Inputs: points, context, study_code.

get_study_protocolHow to run a studyA
Read-onlyIdempotent
Inspect

Return the full procedure for one study: what it is for, the equipment needed, the step-by-step method at the press, and what a good result looks like, so the numbers collected at the press are the ones the calculation needs.

Inputs: study (required).

open_study_sheetOpen a study data sheetA
Read-onlyIdempotent
Inspect

Open an empty data sheet for one study in an interactive card: the procedure beside a table the person fills in or pastes into, with the result computed as they type. Also returns the procedure as text and a link to the same calculator on the Lab website.

Inputs: study (required), setpoints.

plan_process_developmentPlan the study sequenceA
Read-onlyIdempotent
Inspect

Given the studies already run, return the full development sequence with each one marked done or outstanding, what each fixes, what it depends on, and which study to run next. The order matters: each study fixes a setpoint the next one holds constant, so running them out of order produces numbers that do not transfer.

Inputs: completed, setpoints.

pressure_dropPressure-drop studyB
Read-onlyIdempotent
Inspect

Find where injection pressure is consumed along the flow path. Each reading is the CUMULATIVE peak pressure needed to fill through that section — an air shot gives the nozzle figure, then sprue, runner, gate and the full part — so the values ascend. Known sections: Nozzle, Sprue, Runner, Gate, Part. Run every reading at the velocity the viscosity curve selected.

Inputs: stages, context, study_code, machineMaxPressure, +1 more.

process_capabilityProcess capability (Cp, Cpk, Pp, Ppk)A
Read-onlyIdempotent
Inspect

Judge whether a running process can hold a dimension inside its tolerance. Reports Cp and Cpk from within-subgroup sigma and Pp and Ppk from overall sigma — the second pair is what a customer's SPC package computes from the same measurements — each with a 95% confidence interval, an upper bound on parts per million out of spec, and an Anderson–Darling normality check. Estimators follow Minitab's defaults. No verdict is given when the data cannot support one (no limit, zero spread, badly non-normal data). One specification limit is enough. Sample at least 25 consecutive parts without adjusting the process.

Inputs: lsl, usl, target, samples, +3 more.

viscosity_curveViscosity curve studyA
Read-onlyIdempotent
Inspect

Find the optimal injection velocity from a velocity / peak-pressure sweep. Computes relative viscosity (plastic pressure times fill time) against relative shear rate, locates the shear-thinning plateau, and picks a velocity from the middle of it. Record a fill time on every point for a result that transfers between machines. This is the first study in the sequence; every later study holds its velocity constant.

Inputs: points, context, study_code, machineMaxPressure, +1 more.

Tool Schema Changelog

Recent tool additions, removals, and schema changes observed during successful MCP inspections.

Loading tool schema changelog…

    Related MCP Connectors

    Related MCP Servers

    • A
      license
      C
      quality
      C
      maintenance
      Deterministic Odoo ERP calculators: implementation, migration and upgrade cost, ROI and TCO, US/Canada/EU sales tax and VAT, Canadian payroll source deductions, and inventory maths (reorder point, safety stock, EOQ, landed cost, OEE). 24 tools, each a pure function, the numbers are arithmetic rather than a model's guess. Hosted remote server, no install and no API key; a stdio bridge is included
      24
      MIT
    • A
      license
      Not graded
      quality
      D
      maintenance
      Enables AI agents to perform statistical process control calculations using validated, deterministic tools such as control charts, capability analysis, and tolerance intervals.
      3
      MIT
    • A
      license
      A
      quality
      C
      maintenance
      Connects AI agents to over 2,700 interactive precision scientific, engineering, horological, and bullion calculators, returning verified formulas and step-by-step mathematical proofs without login or API keys.
      5
      412 npm
      MIT
    • A
      license
      A
      quality
      D
      maintenance
      Provides professional-grade data center engineering calculations including cooling, power, GPU thermal optimization, UPS/battery sizing, tier classification, and commissioning workflows, compliant with ASHRAE and Uptime Institute standards.
      8
      49 npm
      1
      MIT
    Try in Browser

    Glama MCP Gateway

    Add one secure layer between your agents and this server.

    Resources