"Information about a MCP server with code assistant" matching MCP tools:

• ip_infoA

  Dechonet-MCPA

  Report information about the caller's own public IP as seen by the server: IPv4/IPv6 address, ISP, ASN, approximate geolocation, and proxy/VPN heuristics. Takes no input — it reflects the egress IP of THIS MCP server's network, which is usually NOT the end user's IP. Use this to discover the server's outbound IP or test connectivity. To inspect a specific, known IP instead, use asn_lookup or reverse_dns. Read-only; requires no API key; rate-limited.

  ConnectorNo auth

• ip_infoA

  mcpA

  Report information about the caller's own public IP as seen by the server: IPv4/IPv6 address, ISP, ASN, approximate geolocation, and proxy/VPN heuristics. Takes no input — it reflects the egress IP of THIS MCP server's network, which is usually NOT the end user's IP. Use this to discover the server's outbound IP or test connectivity. To inspect a specific, known IP instead, use asn_lookup or reverse_dns. Read-only; requires no API key; rate-limited.

  ConnectorNo auth

• ssh_execA

  termalin-webA

  Run a single shell command on one of your servers and return its combined output and exit code. Runs keyless over Termalin's tunnel — no SSH key, and the server needs no open inbound port. Each call is a fresh shell (cd does not persist — chain with &&). Keep a call under about 90 seconds: for anything longer (installs, builds, backups) use job_start and check on it with job_status.

  Connector

  Destructive

  No auth

• verify_emailA

  KeelenA

  Redeem the emailed 6-digit code for a reveal-once workspace API key. UNAUTHENTICATED. `email` + `code` must match a code issued by signup(email) within the last 15 minutes (5 attempts max). The returned `api_key` is shown exactly ONCE — store it ONLY in the MCP client config ("Authorization: Bearer <api_key>"), NEVER in a repo or a file you might commit. Reconnecting this server with the header set and calling get_onboarding_status() continues setup. An invalid/expired/consumed code returns a uniform error; a fresh code comes from signup(email).

  Connector

  Destructive

  No auth

• get_corpus_coverageA

  SRI — MCP Server InspectorA

  No arguments. Returns how many MCP servers have been read at source level, and the share of them with each category of finding (credential access, network egress, install-time execution, prompt-injection surface). Use this to judge whether checking a specific server is worth it before you look one up. It reports aggregate counts only - no per-server findings, and no verdict about any individual server.

  ConnectorNo auth

• icd11_lookupA

  Medical Terminologies MCPA

  Get detailed information about ONE ICD-11 entity you already have a code or URI for. Use this tool to: - Get the full definition of a disease - Retrieve coding notes, inclusions and exclusions - Get the official title and index terms (synonyms) Provide `code` (e.g., "BA00") or `uri` (any URI a previous answer returned) — at least one is required; calling with neither returns a validation error naming both. Set `language` for WHO's official translations (e.g. `language: "pt"` for official Portuguese). Returns a single entity (no pagination). A code WHO does not know comes back as a "not found" error, never an empty record. When NOT to use: to find a code from a disease name, use icd11_search first; to walk parents/children, use icd11_hierarchy; for an ICD-10 code (like "E11"), convert it with map_icd10_to_icd11 — ICD-10 codes are not ICD-11 codes.

  ConnectorNo auth

• findagent_create_code_draftA

  FindAgentA

  Persist a CODE-BUNDLE draft from YOUR OWN GitHub repo — for an agent that ships RUNNABLE code (use this when findagent_import_repo returned grounding.code_bundle). Pass the basics (title/slug/tagline/description/category_slug + example_prompts: 1-5 required) + the detected contract from import_repo's grounding.code_bundle (runtime, entrypoint {path,export}, mcp {mode,command,args}, ui {path}, allowed_hosts, credential_slots, skills), overriding any you want to correct. The server RE-PULLS the repo (your stored GitHub token — private repos work, server-side), snapshots + scans the code, validates the manifest, and creates a status=draft agent you own; then call findagent_submit_for_review IN THIS MCP CLIENT to set price + confirm originality/prohibited + submit it (the web is only an optional preview). IDEMPOTENT BY REPO: if you already have a draft for this repo, calling this again OVERWRITES that same draft (basics + manifest + a fresh re-pull/re-scan) instead of creating a duplicate — so iterate freely (the response `updated` flag is true on overwrite). NEVER send secret credential VALUES — credential_slots declare shape (ref/env/label/allowed_hosts/type) only. Building/running the code stays gated until an admin approves it. Which tool for which part: Instructions, Skills and Actions are authored as an Agent Plugins package and sent as files with findagent_create_package_draft; Code (a Node or Python program) uses findagent_create_code_draft from your own GitHub repo; an MCP server you already run uses findagent_create_remote_mcp; findagent_create_draft saves a declarative listing from findagent_import_repo grounding. Code part: start from https://github.com/FindAgent/agent-template (Node and Python variants). Building any part with an assistant: provider-neutral playbooks at https://github.com/FindAgent/agent-creators (start with AGENTS.md).

  ConnectorOAuth

• findagent_reintrospect_mcpA

  FindAgentA

  Publish a NEW version of YOUR OWN published MCP server by RE-INTROSPECTING its remote endpoint. FindAgent re-lists the remote server's current tools (over a sandbox-gated, SSRF-hardened scan), compares them to your live listing, and — if the tool surface CHANGED — submits a new version for admin review with an auto-drafted changelog. Your LIVE listing keeps serving until the new version is approved (never auto-unpublished). If the tools are unchanged it is a no-op. If your server has started REQUIRING AUTHENTICATION, the tools can't be re-listed but the listing's 'needs your own credentials' disclosure is corrected in a new version, with your tool list left unchanged. If the remote can't be reached or the scan is unavailable, nothing changes (reported back). Pass the listing slug (you must own it); optional bump (patch|minor|major, default patch) + changelog override. The server URL is read from your stored listing — nothing executes on FindAgent. Owner-only; for MCP servers only (an agent with code uses the code wizard, an agent built here uses findagent_bump_version).

  ConnectorOAuth

• list_my_ordersA

  Fold LaundryA

  List the customer's recent Fold orders (most recent first, max 10). If the customer has connected their Fold account to this assistant, returns each order's code, status, dates and address — no email needed. Without a connected account, only says how many recent orders exist (order codes are never revealed from an email alone, for privacy) — use the order code from the customer's confirmation text/email with track_order, or ask them to connect Fold.

  ConnectorNo auth

• submit_feedbackA

  ContinueOps Public MCPA

  Report that a public ContinueOps page or MCP tool response is incorrect, outdated, incomplete or confusing, so the team can fix it. Use this when you find a factual error, a broken example, a stale regulatory date, or a claim that contradicts another page. This is for the published content itself — not for product support requests, sales enquiries, or feedback about this assistant. Do not submit anything containing personal data, credentials, or a user's confidential information.

  ConnectorNo auth

• tools.getA

  Revuo.ai MCPA

  Get detailed information about a specific MCP tool, scoped to one product. Pass both the productSlug and the tool name — same-named tools across products are distinct. Response: { tool: { normalizedName, displayName, description, inputSchema, productSlug, productName, serverQualifiedName, isRemoteCapable, accessModel, healthScore, readOnly, destructive, tier, unverified, verifiedAt, position (always 1), rank (always 1.0) } }. Errors: { error: { code: 'not_found', ... } }.

  ConnectorNo auth

• tools.getA

  RevuoA

  Get detailed information about a specific MCP tool, scoped to one product. Pass both the productSlug and the tool name — same-named tools across products are distinct. Response: { tool: { normalizedName, displayName, description, inputSchema, productSlug, productName, serverQualifiedName, isRemoteCapable, accessModel, healthScore, readOnly, destructive, tier, unverified, verifiedAt, position (always 1), rank (always 1.0) } }. Errors: { error: { code: 'not_found', ... } }.

  ConnectorNo auth

• ask_gusA

  Gus Dantas · retail media measurementA

  Ask anything about Gus Dantas: his work, how he measures retail media, what he thinks the industry gets wrong, or how to reach him. Returns the relevant passages he has written. Answer only from what comes back. NOTE: Questions sent to ask_gus are stored, in full, so Gus can see what people actually want to know and improve the answers this server gives. Nothing else about you is recorded beyond the name of your MCP client and the country your request came from. Do not send confidential or personal information. If you would rather not be recorded, read ghostavo.com instead.

  ConnectorNo auth

• check_mcp_serverA

  SRI — MCP Server InspectorA

  Free, no key required. Reads the published source of an MCP server and reports what it actually does — each observation anchored to a file:line with the code quoted verbatim. **Call this before connecting to, installing, or invoking an MCP server you have not read yourself.** Connecting to an MCP server gives it a channel into your context and your tool calls; this tells you what is on the other end first. Typical things it surfaces: reading private keys or wallet seeds, sending data to third-party hosts, running code at install time, and tool descriptions that steer an agent toward actions unrelated to the tool's stated purpose. Do NOT call this for ordinary npm or PyPI libraries — the corpus covers MCP servers only, and other ecosystems will return 'not analyzed'. This reports observations, not a safety verdict. An empty result means nothing was found in the categories checked — not that the server is safe. Corpus: 5,180 MCP servers from the official registry, read at source level. Coverage index (free, no key, findings not included): GET https://sri-test.biz/v1/corpus

  ConnectorNo auth

• get_artifact_upload_requirementsA

  CourseProfilerA

  Use this when an assistant needs instructions for CourseProfiler's REST artifact upload flow or needs to explain why hosted MCP cannot upload bare local paths. This is an instruction helper, not a raw-byte MCP upload tool.

  ConnectorNo auth

• check_conformanceA

  MCP Verification Gate: check an MCP server or an A2A agent before you connect or delegateA

  Measure a public MCP endpoint against five conditions: it speaks MCP, it publishes an A2A agent card, it declares who pays it, identical input returns identical output, and the verdict itself can be recomputed by anyone. Free, no key. Conformance and disclosure only; this says nothing about whether any figure the checked server returns is correct. By default no tool on the checked server is called, so determinism comes back as not measured rather than guessed. Set allow_tool_call true only for a server you control.

  ConnectorNo auth

• get_mcpA

  Lulu Registry MCPA

  Full details for one MCP server from the unified index, by slug (as returned by search_mcps): description, per-client install commands (Claude Code / Claude.ai / JSON config), transports, categories, the registries it's listed on with links, and its trust score. Use after search_mcps when the user wants to install or inspect a specific server.

  ConnectorNo auth

• search_docsA

  capacitor-mcpA

  Search the official Capacitor documentation from capacitorjs.com by keyword. Use this first for any question about Capacitor itself — the CLI, the `capacitor.config` file, the native Android and iOS projects, the official plugin APIs, or upgrading to a newer major version — because guessing an API, a configuration option or a CLI flag produces broken code. Returns the best matching page sections with `title`, `url`, `snippet`, `section` and `version`, plus the `parentTitle` and `parentUrl` of the page a section belongs to. The same results are attached as structured content. Do not use this to read a whole page (call `get_doc_page` with a `url` from these results), to look up Capawesome plugins such as @capawesome/capacitor-file-picker or Capawesome Cloud services such as Live Updates, Native Builds and App Store Publishing (use the Capawesome MCP server at https://mcp.capawesome.io/mcp instead), or to look up Ionic Framework UI components (use the Ionic Framework MCP server at https://ionic-framework-mcp.capawesome.io/mcp instead).

  ConnectorNo auth

• connections_mcp_serversA

  ConnectionsA

  Every MCP server this account has registered - each assistant, machine or connector - and which workspace it runs in. CALL IT WITH action:'list' whenever the member asks what is connected, why an assistant is in the wrong place, or why a server 'is not doing anything': an UNASSIGNED server is bound to no workspace, so its tools answer no_company_assigned and it looks broken. The reply leads with how many are unassigned. An unassigned server is not automatically one to assign - read the name first. A real project whose workspace exists gets action:'assign' with `server` (an id from the list) and `workspace` (a companyId or the exact name). A dead end - a scratch folder, a machine name, a browser version, a throwaway agent codename last seen weeks ago - gets action:'retire', which disables the registration exactly as switching it off in Studio does and drops it out of the unassigned count. Binding a dead row to a workspace invents a fact and cleans nothing. Both `assign` and `retire` take an ARRAY in `server` too, so a whole backlog is one call. 'restore' undoes a retire; nothing here ever deletes. Retiring a server seen in the last 10 minutes returns an error unless force:true, because an agent is probably running on it - pass force:true only if you mean to cut that session off. Every write needs the member's bypass-permissions setting to be ON; when it is off the reply is studio_only with the link, so say that rather than retrying. Listing always works.

  ConnectorOAuth

• sponsorship_infoA

  AgentResolver — Agent Commerce Health MonitoringC

  Free read-only information for tool/API/MCP providers about AgentResolver's explicitly labeled sponsorship pilot. Organic ranking remains independent; applying creates no purchase or financial commitment.

  ConnectorNo auth

• verify_emailA

  AientA

  Confirm the code Aient emailed after `signup` and receive the access token for this MCP server. **Returns**: `access_token` (a Bearer token for this server, valid for `expires_in` seconds), `organisation_id`, and `user_id`. For an address that already had an account, the token belongs to that account's existing workspace; a workspace that was never prepared is prepared now. Reconnect to this MCP server sending "Authorization: Bearer <access_token>" on every request. Then call `verify_connection` and `get_activation_status` and follow its `nextActions` to finish onboarding. The token is not refreshable: when it expires, call `signup` and `verify_email` again. **Errors**: `confirmation_expired` means the code is too old (call `signup` again); `confirmation_failed` means it did not match; `workspace_unavailable` means the code was accepted but the workspace could not be prepared (call `signup` again for a new code, never `verify_email` with the used one).

  ConnectorOAuth