"Binance" matching MCP tools:

• route_orderA

  ensotradeA

  Cheapest way to fill a crypto perp order across multiple venues, and what that saves versus using the single best venue. Merges every order-book level from Binance, Bybit, Bitget, Hyperliquid, OKX and Gate into one list ordered by FEE-ADJUSTED price and walks it until filled. Use for "how should I split this order", "what's the cheapest venue to buy $2M of SOL", "how much would routing save me". Returns the per-venue allocation, the blended price, the best single venue, and the saving in bp and USD. `coin` = ticker e.g. 'sol'. `notional_usd` = order size in USD. `side` = 'buy' or 'sell'. `venues` = optional comma-separated subset (e.g. "binance,bybit") for a desk that only has accounts on some — the saving is only real on venues you can actually trade. This is a MEASUREMENT of a live book, not a prediction: it is optimal for the static snapshot, prices move while an order works, and it assumes capital is already on each venue and ignores transfer costs. Requires an EnsoTrade Pro API key.

  ConnectorNo auth

• verify_usdt_depositA

  HOTLIKESHOPA

  Check / confirm a USDT deposit created by create_usdt_deposit. Scans the blockchain for a matching transfer and credits your balance when found. Idempotent — safe to poll every ~15s, credits only once. PREREQUISITE: order_code + claim_token from create_usdt_deposit. WHEN TO USE: after the user has sent the USDT, to confirm and credit it; optionally pass method="hash" + tx_hash to verify by a specific transaction. PREFER INSTEAD: verify_binance_deposit for Binance Pay deposits, get_my_balance/wallet_history to inspect balance afterwards. Kiểm tra & xác nhận đơn nạp USDT — quét blockchain, khớp thì cộng tiền (an toàn khi gọi lại nhiều lần).

  ConnectorNo auth

• verify_usdt_depositA

  HOTLIKESHOP MCPA

  Check / confirm a USDT deposit created by create_usdt_deposit. Scans the blockchain for a matching transfer and credits your balance when found. Idempotent — safe to poll every ~15s, credits only once. PREREQUISITE: order_code + claim_token from create_usdt_deposit. WHEN TO USE: after the user has sent the USDT, to confirm and credit it; optionally pass method="hash" + tx_hash to verify by a specific transaction. PREFER INSTEAD: verify_binance_deposit for Binance Pay deposits, get_my_balance/wallet_history to inspect balance afterwards. Kiểm tra & xác nhận đơn nạp USDT — quét blockchain, khớp thì cộng tiền (an toàn khi gọi lại nhiều lần).

  ConnectorNo auth

• stream_register_allA

  ChainHelix for MachinesB

  10 dollars per call paid over Binance b402 in USDT, USDC, USD1 or U on BNB Smart Chain, or over x402 in USDC on the Base network. A ChainHelix API key does not cover this tool. The MEV order flow stream PUSHED to your https URL for all four chains at once (bnb, ethereum, polygon, avalanche): one signed message per chain per completed minute with detected MEV, each carrying the per-pool rows of that minute. 10 dollars buys 7 days of every chain, against 4 dollars per chain one at a time with stream_register. Call again to renew. Manage with webhook_status and webhook_unregister; the contract is in mev_flow_spec

  ConnectorNo auth

• stream_register_allA

  intelB

  10 dollars per call paid over Binance b402 in USDT, USDC, USD1 or U on BNB Smart Chain, or over x402 in USDC on the Base network. A ChainHelix API key does not cover this tool. The MEV order flow stream PUSHED to your https URL for all four chains at once (bnb, ethereum, polygon, avalanche): one signed message per chain per completed minute with detected MEV, each carrying the per-pool rows of that minute. 10 dollars buys 7 days of every chain, against 4 dollars per chain one at a time with stream_register. Call again to renew. Manage with webhook_status and webhook_unregister; the contract is in mev_flow_spec

  ConnectorNo auth

• whale_movesA

  Degenscan IntelA

  Large USDC/USDT transfers on Base and Ethereum from public explorers (no key): USD size, best-effort exchange labels (Binance, Coinbase, OKX, Bybit…), flow tag (to_exchange = potential sell pressure, from_exchange = withdrawal, mint/burn = stablecoin supply, wallet_to_wallet), totals by flow, tx links. Default threshold $1M. $0.002/call. Use for individual large stablecoin transfers; for total supply change use stablecoin_supply.

  ConnectorNo auth

• whale_movesA

  Degenscan IntelA

  Large USDC/USDT transfers on Base and Ethereum from public explorers (no key): USD size, best-effort exchange labels (Binance, Coinbase, OKX, Bybit…), flow tag (to_exchange = potential sell pressure, from_exchange = withdrawal, mint/burn = stablecoin supply, wallet_to_wallet), totals by flow, tx links. Default threshold $1M. $0.002/call. Use for individual large stablecoin transfers; for total supply change use stablecoin_supply.

  ConnectorNo auth

• find_label_valuesA

  Bitquery: Crypto & Blockchain DataA

  DISCOVER which label values exist — resolve a human term to the stored label_type / label_value before calling `addresses_by_label` or `labels_for_addresses`. Case-insensitive substring search over label_value (e.g. "binance" -> cex-deposit-address:'binance-deposit'; "uni-v2" -> token-clone:'clone-uni-v2-…'). Returns each matching label_type + label_value with how many addresses carry it. Optionally restrict to one label_type. Backed by directory.labels. Call this FIRST when the user names an entity or category in words and you need the exact stored value. Counts are across ALL chains unless you pass chain — pass it to judge how well one chain is covered before relying on labels there. Before concluding "no service links", sanity-check coverage against a known entity (e.g. 'binance' → cex-deposit-address, hundreds of thousands of addresses). A value matching a TOKEN name (token-contract / token-clone) is the same-named token, NOT that exchange's wallet — don't conflate them.

  ConnectorOAuth

• get_market_readA

  kr-crypto-intelligenceA

  AI-powered Korean crypto market analysis. Combines Kimchi Premium, stablecoin premium, FX rate, Upbit/Bithumb volume rankings, Binance funding rate, open interest, BTC dominance, and Fear & Greed index. Returns AI-generated signal (BULLISH/BEARISH/NEUTRAL), confidence score, actionable summary, and all raw data. 💰 Price: $0.10 USDC per call 💳 Payment: x402 micropayment on Base, Polygon, or Solana 🔧 Client: AgentCash, Pay.sh, or any x402 SDK 📖 Docs: https://api.printmoneylab.com/.well-known/x402

  ConnectorNo auth

• getCoinMarketsA

  CoinPaprikaA

  Get the specific markets and trading pairs where a coin trades, with per-market price and 24h volume. Use for 'where can I buy X', 'X price on Binance', 'best market for X'. For just the list of exchange names use getCoinExchanges. Read-only; coinId is a canonical id, quotes sets quote currencies, limit caps results. No API key required.

  ConnectorNo auth

• resolve_price_eventA

  Permit VerdictsA

  Settlement verdict for a crypto price event. Answers 'did this asset trade or close above/below a threshold during a window?' with YES/NO/DISPUTED/UNRESOLVED, per-venue evidence from Hyperliquid, Coinbase and Kraken, and stated confidence. (Binance is configured but blocks this host's region; it is reported unavailable rather than silently counted.) Use mode='close' when a market settles on candle closes and mode='touch' when any intrabar print counts — they give different answers and that difference is the most common settlement dispute. Paid: $0.05 in USDC via x402.

  ConnectorNo auth

• get_funding_arbitrageA

  mcpA

  Call this when the user asks about funding arbitrage, funding rate differences between exchanges, or delta-neutral carry trades. Compares funding across every venue on the board, from Binance, OKX and Bybit to Hyperliquid, dYdX and the smaller perp venues fed by the venue snapshot, for 12 major perps and returns the best long/short venue per symbol with gross and net annualized APR (net of taker fees and weekly rebalance cost).

  ConnectorNo auth

• get_altseasonA

  mcpA

  Call this when the user asks whether it is altseason, how altcoins are doing against Bitcoin, or about market rotation. Returns the live Altcoin Season Index (share of the top 50 Binance perpetual altcoins beating BTC over the trailing 90 days; >=75 altseason, <=25 bitcoin season), the strongest and weakest large alts, and the recorded daily history (never reconstructed).

  ConnectorNo auth

• market_candlesA

  f1owA

  OHLC(V) candle history for a coin by symbol (e.g. 'ETH', 'BTC'). 'interval' picks the candle size (1m|5m|15m|30m|1h|4h|12h|1d|1w, default 1d); 'limit' the number of candles (default 100, max 400); 'market' picks the series — 'spot' (Binance, Bybit, then CoinGecko/CoinMarketCap), 'perp' (Hyperliquid, Bybit, then Binance futures — perpetual marks), or 'auto' (default: spot preferred, perp fallback). spot/perp are hard constraints and error rather than substitute. The response labels the market, interval and source actually delivered, includes USD volume when the source carries it, and flags a still-forming last candle.

  ConnectorNo auth

• token_priceA

  Agent Margin RouterA

  Multi-venue median spot price for any major crypto asset (Binance, Coinbase, Kraken, CoinGecko) with min/max, deviation and confidence score – one call instead of four. No API key. Pay per call with USDC or USDT on Base via x402. 3 free calls per wallet.

  ConnectorNo auth

• entity_name_searchA

  NansenA

  Search Nansen's entity names by a partial name and get back the exact entity names that match. Use this when a tool needs an exact entity name and the user gave an approximate one (e.g. "binance" -> "Binance 14"). Matching is case-insensitive and matches anywhere in the name. For tokens or addresses use `general_search` instead.

  ConnectorNo auth

• entity_name_searchA

  NansenA

  Search Nansen's entity names by a partial name and get back the exact entity names that match. Use this when a tool needs an exact entity name and the user gave an approximate one (e.g. "binance" -> "Binance 14"). Matching is case-insensitive and matches anywhere in the name. For tokens or addresses use `general_search` instead.

  ConnectorNo auth

• get_liquidation_heatmapA

  LiquidVision — Crypto Derivatives DataA

  [modeled] How the liquidation map evolved over time: grid[t][b] is the estimated USD of leveraged positions with their liquidation price in price bin b at time cols[t] (ms), bins[b] is the bin's centre price (240 bins fitted to the traded range) and price[t] is the close. A level disappears once price trades through it. Use get_liquidation_map for the current picture only (smaller answer, split by leverage and exchange); use this one to see when a cluster formed and whether it is still there. The answer is large (about 35,000 numbers). symbol: BASEUSDT. exchange: all | binance | bybit | okx. range: 12h | 1d | 3d | 7d.

  ConnectorNo auth

• get_orderbook_heatmapA

  LiquidVision — Crypto Derivatives DataA

  [measured] Resting limit orders over time on ONE exchange: cells of (time bucket, price bucket, quantity in coins) from archived order-book snapshots, with price_min, price_max, price_step and time_step (seconds) describing the grid. Shows where bid and ask walls stood and when they were pulled; not liquidations (see get_liquidation_heatmap for those) and not trades (get_footprint). exchange: binance | bybit | okx. symbol: BTCUSDT, ETHUSDT or SOLUSDT only. minutes: 1 to 1440.

  ConnectorNo auth

• get_liquidation_heatmapA

  LiquidVision — Crypto Derivatives DataA

  [modeled] How the liquidation map evolved over time: grid[t][b] is the estimated USD of leveraged positions with their liquidation price in price bin b at time cols[t] (ms), bins[b] is the bin's centre price (240 bins fitted to the traded range) and price[t] is the close. A level disappears once price trades through it. Use get_liquidation_map for the current picture only (smaller answer, split by leverage and exchange); use this one to see when a cluster formed and whether it is still there. The answer is large (about 35,000 numbers). symbol: BASEUSDT. exchange: all | binance | bybit | okx. range: 12h | 1d | 3d | 7d.

  ConnectorNo auth

• get_orderbook_heatmapA

  LiquidVision — Crypto Derivatives DataA

  [measured] Resting limit orders over time on ONE exchange: cells of (time bucket, price bucket, quantity in coins) from archived order-book snapshots, with price_min, price_max, price_step and time_step (seconds) describing the grid. Shows where bid and ask walls stood and when they were pulled; not liquidations (see get_liquidation_heatmap for those) and not trades (get_footprint). exchange: binance | bybit | okx. symbol: BTCUSDT, ETHUSDT or SOLUSDT only. minutes: 1 to 1440.

  ConnectorNo auth