"Amazon Web Services (AWS) information and resources" matching MCP tools:

• run_cost_scanA

  Tomorrow Central: Cloud Cost SentinelB

  Start a cloud cost / FinOps scan of a linked account and return a job_id. Use this when the user wants to find idle, unused or underutilized cloud resources, review cloud spend, or estimate savings. The provider comes from the connection, and **AWS is the only provider supported today** (see `list_connections`). Other clouds will appear on this same tool as connections for them become linkable; nothing else about the call changes. READ-ONLY against your cloud: it reads resource metadata and monitoring metrics and reports; it never changes, stops or deletes anything. (It does create a scan job here and consume that account's scan quota, which is why this tool is not marked read-only.) On AWS it covers EC2 instances, EBS volumes and snapshots, RDS instances, Elastic IPs, NAT Gateways, load balancers, VPCs and VPC endpoints, site-to-site VPN and Transit Gateway attachments, Client VPN endpoints, Secrets Manager secrets, CloudFront distributions and WAF web ACLs. Resource kinds outside that list are not inspected, so a clean scan is not a claim that the whole bill is optimized. `connection_id` picks which linked AWS account to scan (see `list_connections`). Omit it to run against sample data — useful for showing the user what the output looks like before any account is linked. The scan runs asynchronously: poll `get_job(job_id)` roughly every 10 seconds until status is COMPLETED (typically 1-3 minutes), then call `list_cost_findings(job_id)`. Do NOT start another scan while one is running — each scan consumes the account's monthly quota. Pass `idempotency_key` (any unique string you choose) if you may retry on a network error: a retry with the same key returns the original job instead of starting a second scan.

  ConnectorNo auth

• awsinspect_batchA

  InsideOut (Riley)A

  BATCH INSPECTION: run up to 32 AWS inspect probes in one call. ⚠️ **PREREQUISITE**: Same as awsinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single AWS config — for a 12-resource health check this is ~5–8× faster and 12× fewer Oracle round-trips than calling awsinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8 — sub-probes run in parallel but never saturate AWS. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, acm, alb, apigateway, apprunner, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, route53, s3, sagemaker, secretsmanager, sqs, vpc, waf For a specific service's actions, use awsinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular awsinspect when you need full metadata or raw API output for one resource. EXAMPLES: - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"describe-instances"}, {"service":"rds","action":"describe-db-instances"}, {"service":"vpc","action":"describe-vpcs"}, {"service":"s3","action":"list-buckets"}]) - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"rds","action":"get-metrics","filters":"{\"hours\":6}"}])

  ConnectorNo auth

• awsinspect_batchA

  InsideOut (Riley)A

  BATCH INSPECTION: run up to 32 AWS inspect probes in one call. ⚠️ **PREREQUISITE**: Same as awsinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single AWS config — for a 12-resource health check this is ~5–8× faster and 12× fewer Oracle round-trips than calling awsinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8 — sub-probes run in parallel but never saturate AWS. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, acm, alb, apigateway, apprunner, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, route53, s3, sagemaker, secretsmanager, sqs, vpc, waf For a specific service's actions, use awsinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular awsinspect when you need full metadata or raw API output for one resource. EXAMPLES: - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"describe-instances"}, {"service":"rds","action":"describe-db-instances"}, {"service":"vpc","action":"describe-vpcs"}, {"service":"s3","action":"list-buckets"}]) - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"rds","action":"get-metrics","filters":"{\"hours\":6}"}])

  ConnectorNo auth

• get_tier1_recommendationsA

  Tier1 IT AssessmentA

  Maps only stable Tier1 finding identifiers to approved Tier1 services and public resources. Call after a Tier1 score or email-domain check. Do not submit prose, URLs, customer information, or invented identifiers. This tool performs no arbitrary fetching, makes no contact request, changes nothing, and stores nothing.

  ConnectorNo auth

• keyword_cross_marketplaceA

  amazon-product-research-mcpB

  Check which of the 11 Amazon marketplaces a keyword was observed in Amazon's own autocomplete suggestions, with first/last observed dates and an example current suggestion-list position per marketplace. Use when a seller asks 'does anyone type X on Amazon Germany/Japan/…', compares keyword presence across countries, or plans a marketplace expansion (pair with brand_xmarket / operator_xmarket_presence). Exact-keyword match — not volumes, not rankings. Amazon marketplaces only.

  ConnectorNo auth

• create_cloud_connectionA

  Tomorrow Central: Cloud Cost SentinelB

  Start linking a cloud account so it can be scanned. `provider` is "aws", the only provider supported today; `account_id` is the 12-digit AWS account number. `software` is the Tomorrow Central software the link is for; omit it for Cloud Cost Sentinel. Each software has its own read-only role, so link once per software. This is a two-party flow and you cannot finish it alone — creating the read-only IAM role requires the human's AWS credentials. Returns a `launch_url`. Hand the human these instructions verbatim: 1. Open the launch_url (a pre-filled CloudFormation quick-create link). 2. Review the read-only role it creates, then click Create stack. 3. Tell you when the stack says CREATE_COMPLETE. Then call `verify_connection` with the returned connection_id. Verification fails with a clear message until the role exists, so polling it every ~15 seconds is safe and expected. No ARN or secret needs to be copied by anyone.

  ConnectorNo auth

• amazon_search_resultsA

  amazon-product-research-mcpB

  Fetch a LIVE Amazon search-results page (SERP) right now — the ranked organic + sponsored listings a shopper would see this minute for a query, with position, ASIN, title, price, rating and badges. Use when the user wants CURRENT ranking/visibility: 'who ranks for "dog bed" on Amazon right now', 'is my ASIN on page 1 for this keyword', 'what's sponsored vs organic for this search'. This is a real-time fetch (takes ~10-40 seconds) — for warehouse keyword search use search_products; for buying advice use shopping_search. Amazon marketplaces only; up to 3 pages per call.

  ConnectorNo auth

• get_product_detailA

  Easyparser — Amazon Product & Seller DataA

  Fetch complete, structured information about a single Amazon product: title, brand, images, feature bullets, description, Buy Box price and availability, Prime eligibility, rating and review count, Best Sellers Rank, category path, variants, specifications, and top reviews. This is the primary tool for product analysis, listing enrichment, and price monitoring. Use this tool when you need a full product profile. If you only need competing seller prices, use get_product_offers instead (cheaper context). If you only need the sales rank, use get_bestseller_rank. If you only need shipping dimensions or the FBA fee category, use get_package_dimensions. Provide EITHER the identifier field OR url — never both. Costs 1 credit; set a_plus_content to true only when the user explicitly asks about enhanced brand content, as it costs 1 extra credit.

  ConnectorNo auth

• ads_update_sb_campaignA

  VendoolyC

  Aggiorna una o PIÙ campagne Sponsored Brands (SB) ESISTENTI: budget giornaliero, stato (ENABLED|PAUSED) e OTTIMIZZAZIONE DELL'OFFERTA. Per ottimizzare senza tagliare volume NON strozzare il budget: usa i moltiplicatori per posizionamento con patches.bid_adjustments_by_placement=[{placement, percentage}] — placement (enum verificato): TOP_OF_SEARCH | DETAIL_PAGE | HOME | OTHER (alias comodi: top, detail_page, home, other); percentage = aumento % dell'offerta su quella posizione, SOLO valori positivi (0 o più): dal 15/6/2026 Amazon NON accetta più moltiplicatori SB negativi e il tool li rifiuta prima di chiamare Amazon. Per spendere meno su una posizione abbassa i bid di keyword/target (ads_update_sb_keyword_bid/ads_update_sb_target_bid) e alza le altre posizioni. Passare i moltiplicatori implica bid_optimization=false (ottimizzazione Amazon spenta — richiesto da Amazon); con bid_optimization=true/AUTO ottimizza Amazon e i moltiplicatori non servono. SINGOLA: campaign_id + patches. BATCH: items=[{campaign_id, daily_budget?, state?, bid_adjustments_by_placement?}], MAX 25. Esito verificato per-id e PER-PLACEMENT (read-after-write). NON crea campagne nuove.

  Connector

  Destructive

  OAuth

• prepare_product_ad_state_v1A

  Sellantica Amazon AdsA

  Create an idempotent, auditable write intent to change the state of one or more EXISTING product ads: enable, pause, or archive (archiving is dispatched as an Amazon delete, not a state PUT). ad_id must be the Amazon product ad's own id (not its ASIN or its ad group id); a request for a state the ad is already in is rejected at prepare time. Nothing changes on Amazon or in Sellantica until the returned request is confirmed via approve_write_v1 and then execute_write_v1. The preview states `will_dispatch`: true means execute_write_v1 sends it to Amazon, false (execution_mode PREVIEW_ONLY) means it is recorded and never sent. To create a brand-new product ad instead of changing an existing one's state, use prepare_product_ad_create_v1.

  Connector

  Destructive

  OAuth

• amazon_get_competitorsA

  Manifold MCPA

  Amazon products that compete with one product for the same searches, with how many they share and how each ranks. Use when: "which products compete with ours on Amazon", "who shows up beside this ASIN", building a competitor set for a listing. Not for: the results for one search, use amazon_search_products. Web competitors, use seo_get_serp_competitors. Returns: List. rows[]: asin, shared_keywords, avg_position, organic_keywords, organic_volume, sponsored_keywords. ASINs only: call amazon_get_product for a title. The product itself is left out. Cost: 5 + 5 per 100 rows. Default 100 rows = 10 credits. Cached 7 days. Example: {"asin": "B0B41YH9B6", "limit": 20}

  ConnectorAPI key

• amazon_get_keyword_metricsA

  Manifold MCPA

  Monthly Amazon search volume for up to 1,000 keywords you already have, in the order given. Use when: "how many people search Amazon for X", comparing Amazon demand with Google demand, sizing a product idea on Amazon. Not for: Google volume, use seo_get_keyword_metrics. Finding keywords, use amazon_search_keywords. Returns: List. rows[]: keyword, volume (monthly Amazon searches; null = no data). Cost: 5 + 5 per 100 keywords. 10 keywords = 6 credits. Cached 7 days. Example: {"keywords": ["standing desk", "desk converter"]}

  ConnectorAPI key

• amazon_search_keywordsA

  Manifold MCPA

  Amazon search ideas around a seed, from Amazon's related searches, with monthly Amazon search volume. Use when: "what else do people search on Amazon around X", building an Amazon keyword list for a listing or ads. Not for: Google keyword ideas, use seo_search_keywords. Volume for keywords you already have, use amazon_get_keyword_metrics. Returns: List. rows[]: keyword, volume. Cost: 5 + 5 per 100 rows. Default 100 rows = 10 credits. Cached 7 days. Example: {"seed": "standing desk", "limit": 50}

  ConnectorAPI key

• amazon_productA

  FastAFA

  Looks up Amazon products. With asin it returns one product (asin, title, brand, price, availability, rating, reviews_count, url, image); with query, up to 20 results from the first search page (title, url, asin, price, rating, reviews_count, position). Send asin or query, not both; marketplace selects the Amazon site (default com). It does not return reviews, offers, bestseller lists or price history, nor prices from other merchants (use google_shopping_prices). A search with no matches is charged; errors are not. Required: asin or query.

  ConnectorNo auth

• wafermap_resourcesA

  WafermapA

  Lists Wafermap's pay-per-call resources (35 of its own) and the live Inference Marketplace listings (ids "m/<name>", run and paid directly to their seller, provider "community") with id, name, category, USD price and a one-line summary. Use it first to find the right resource id; then read its input schema with wafermap_resource_schema and run it with wafermap_call. Categories: LLMs, image generation, audio (speech and transcription), vision, web (reading and translation), on-chain data on Robinhood Chain and Base, tokenized stocks, Polymarket prediction markets and content tools. Free, no payment needed.

  ConnectorNo auth

• panda_delete_ai_resourceA

  Panda VideoB

  Delete ONE AI package resource of a video in one language (eBook, mind map or quiz) — cannot be undone: its content, PDF, images and the published file are removed, also for legacy resources. Same as the dashboard's Remove. Refused while it is still generating (checked before deleting; if that check fails nothing is deleted). Other languages and resources stay. To remove a failed generation card use panda_delete_ai_workflow.

  Connector

  Destructive

  No auth

• awsinspectA

  InsideOut (Riley)A

  INSPECTION: Inspect AWS infrastructure for a deployed project ⚠️ **PREREQUISITE**: This tool requires a prior deployment ATTEMPT (successful or failed). Check convostatus for hasDeployAttempt=true before calling. Works even after failed deploys to inspect orphaned resources. Inspect deployed AWS resources after a deployment attempt. Use this tool when the user asks about the status or details of their deployed infrastructure. It fetches temporary read-only credentials securely and queries the AWS API directly. RESPONSE TIERS (default is summary for token efficiency): - Summary (default): Key fields only (~500 tokens). Set detail=false, raw=false or omit both. - Detail: Full metadata for a specific resource. Set detail=true + resource filter. - Raw: Complete unprocessed API response. Set raw=true. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, acm, alb, apigateway, apprunner, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, route53, s3, sagemaker, secretsmanager, sqs, vpc, waf For a specific service's actions, call with action="list-actions". METRICS: Use list-metrics to discover available metrics for a service (no credentials needed). Then use get-metrics to retrieve data (auto-discovers resources). Most services return CloudWatch time-series. KMS returns key health (rotation, state). SecretsManager returns secret health (rotation, last accessed/rotated). Optional filters JSON: {"hours":6,"period":300}. BILLING: Use service=cost-explorer to inspect AWS costs. Actions: get-cost-summary (last 30 days by service, filters: {"days":7,"granularity":"DAILY"}), get-cost-forecast (projected spend through end of month), get-cost-by-tag (costs grouped by tag, filters: {"tag_key":"Environment","days":30}). Requires ce:GetCostAndUsage and ce:GetCostForecast IAM permissions. EXAMPLES: - awsinspect(session_id=..., service="ec2", action="describe-instances") - awsinspect(session_id=..., service="cost-explorer", action="get-cost-summary") - awsinspect(session_id=..., service="ec2", action="get-metrics", filters="{\"hours\":6}") - awsinspect(session_id=..., service="rds", action="describe-db-instances", detail=true)

  ConnectorNo auth

• list_booking_servicesA

  Vila BuarqueA

  List a venue's services — what it offers, with price and duration. Pass `place_slug` (from search_places) to list the services of a specific VENUE — a salon, clinic or studio listed in this directory; that is what you want in almost every case, and it is the only form whose serviceId works with create_booking. Omitting `place_slug` lists the directory site's own services instead, which most sites do not have. Returns name, description, price, duration in minutes, and `bookableViaMcp`. Services are listed for EVERY venue, including those with no online booking system — check `bookableViaMcp`: when it is false, `id` is null and you cannot book through create_booking, so point the user at `bookingUrl` or the venue's page instead.

  ConnectorNo auth

• awsinspectA

  InsideOut (Riley)A

  INSPECTION: Inspect AWS infrastructure for a deployed project ⚠️ **PREREQUISITE**: This tool requires a prior deployment ATTEMPT (successful or failed). Check convostatus for hasDeployAttempt=true before calling. Works even after failed deploys to inspect orphaned resources. Inspect deployed AWS resources after a deployment attempt. Use this tool when the user asks about the status or details of their deployed infrastructure. It fetches temporary read-only credentials securely and queries the AWS API directly. RESPONSE TIERS (default is summary for token efficiency): - Summary (default): Key fields only (~500 tokens). Set detail=false, raw=false or omit both. - Detail: Full metadata for a specific resource. Set detail=true + resource filter. - Raw: Complete unprocessed API response. Set raw=true. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, acm, alb, apigateway, apprunner, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, route53, s3, sagemaker, secretsmanager, sqs, vpc, waf For a specific service's actions, call with action="list-actions". METRICS: Use list-metrics to discover available metrics for a service (no credentials needed). Then use get-metrics to retrieve data (auto-discovers resources). Most services return CloudWatch time-series. KMS returns key health (rotation, state). SecretsManager returns secret health (rotation, last accessed/rotated). Optional filters JSON: {"hours":6,"period":300}. BILLING: Use service=cost-explorer to inspect AWS costs. Actions: get-cost-summary (last 30 days by service, filters: {"days":7,"granularity":"DAILY"}), get-cost-forecast (projected spend through end of month), get-cost-by-tag (costs grouped by tag, filters: {"tag_key":"Environment","days":30}). Requires ce:GetCostAndUsage and ce:GetCostForecast IAM permissions. EXAMPLES: - awsinspect(session_id=..., service="ec2", action="describe-instances") - awsinspect(session_id=..., service="cost-explorer", action="get-cost-summary") - awsinspect(session_id=..., service="ec2", action="get-metrics", filters="{\"hours\":6}") - awsinspect(session_id=..., service="rds", action="describe-db-instances", detail=true)

  ConnectorNo auth

• list_booking_servicesA

  Bela VistaA

  List a venue's services — what it offers, with price and duration. Pass `place_slug` (from search_places) to list the services of a specific VENUE — a salon, clinic or studio listed in this directory; that is what you want in almost every case, and it is the only form whose serviceId works with create_booking. Omitting `place_slug` lists the directory site's own services instead, which most sites do not have. Returns name, description, price, duration in minutes, and `bookableViaMcp`. Services are listed for EVERY venue, including those with no online booking system — check `bookableViaMcp`: when it is false, `id` is null and you cannot book through create_booking, so point the user at `bookingUrl` or the venue's page instead.

  ConnectorNo auth

• list_booking_servicesA

  Agenda RioA

  List a venue's services — what it offers, with price and duration. Pass `place_slug` (from search_places) to list the services of a specific VENUE — a salon, clinic or studio listed in this directory; that is what you want in almost every case, and it is the only form whose serviceId works with create_booking. Omitting `place_slug` lists the directory site's own services instead, which most sites do not have. Returns name, description, price, duration in minutes, and `bookableViaMcp`. Services are listed for EVERY venue, including those with no online booking system — check `bookableViaMcp`: when it is false, `id` is null and you cannot book through create_booking, so point the user at `bookingUrl` or the venue's page instead.

  ConnectorNo auth