"A service or resource for finding a coding expert" matching MCP tools:

• awsinspect_batch

  InsideOut (Riley)

  BATCH INSPECTION: run up to 32 AWS inspect probes in one call. ⚠️ **PREREQUISITE**: Same as awsinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single AWS config — for a 12-resource health check this is ~5–8× faster and 12× fewer Oracle round-trips than calling awsinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8 — sub-probes run in parallel but never saturate AWS. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, acm, alb, apigateway, apprunner, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, route53, s3, sagemaker, secretsmanager, sqs, vpc, waf For a specific service's actions, use awsinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular awsinspect when you need full metadata or raw API output for one resource. EXAMPLES: - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"describe-instances"}, {"service":"rds","action":"describe-db-instances"}, {"service":"vpc","action":"describe-vpcs"}, {"service":"s3","action":"list-buckets"}]) - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"rds","action":"get-metrics","filters":"{\"hours\":6}"}])

  Connector

• la_query

  Data La

  Run a raw SoQL query against any Los Angeles open-data resource (data.lacity.org) by its Socrata id (8-char like "2nrs-mtv8"). Full SoQL: where/select/group/order/limit/offset. Use la_datasets to find a resource id, or la_recent for the common ones.

  Connector

• awsinspect_batch

  InsideOut (Riley)

  BATCH INSPECTION: run up to 32 AWS inspect probes in one call. ⚠️ **PREREQUISITE**: Same as awsinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single AWS config — for a 12-resource health check this is ~5–8× faster and 12× fewer Oracle round-trips than calling awsinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8 — sub-probes run in parallel but never saturate AWS. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, acm, alb, apigateway, apprunner, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, route53, s3, sagemaker, secretsmanager, sqs, vpc, waf For a specific service's actions, use awsinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular awsinspect when you need full metadata or raw API output for one resource. EXAMPLES: - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"describe-instances"}, {"service":"rds","action":"describe-db-instances"}, {"service":"vpc","action":"describe-vpcs"}, {"service":"s3","action":"list-buckets"}]) - awsinspect_batch(session_id=..., subs=[ {"service":"ec2","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"rds","action":"get-metrics","filters":"{\"hours\":6}"}])

  Connector

• get_integration_guide

  TestMyVibes

  Returns the canonical guide for using TMV from a coding-agent context. Covers the fix-test-retest loop, how to write a good test prompt, how to read the actionTrail / consoleErrors / failedRequests outputs, and common gotchas. Call this first if you're a new agent on a project — it'll save you a debug session. The same content is served at https://testmyvibes.com/docs/coding-agents.

  Connector

• awsinspect

  InsideOut (Riley)

  INSPECTION: Inspect AWS infrastructure for a deployed project ⚠️ **PREREQUISITE**: This tool requires a prior deployment ATTEMPT (successful or failed). Check convostatus for hasDeployAttempt=true before calling. Works even after failed deploys to inspect orphaned resources. Inspect deployed AWS resources after a deployment attempt. Use this tool when the user asks about the status or details of their deployed infrastructure. It fetches temporary read-only credentials securely and queries the AWS API directly. RESPONSE TIERS (default is summary for token efficiency): - Summary (default): Key fields only (~500 tokens). Set detail=false, raw=false or omit both. - Detail: Full metadata for a specific resource. Set detail=true + resource filter. - Raw: Complete unprocessed API response. Set raw=true. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: account, acm, alb, apigateway, apprunner, backup, bedrock, cloudfront, cloudwatchlogs, cognito, cost-explorer, dynamodb, ebs, ec2, ecs, eks, elasticache, kms, lambda, msk, opensearch, rds, route53, s3, sagemaker, secretsmanager, sqs, vpc, waf For a specific service's actions, call with action="list-actions". METRICS: Use list-metrics to discover available metrics for a service (no credentials needed). Then use get-metrics to retrieve data (auto-discovers resources). Most services return CloudWatch time-series. KMS returns key health (rotation, state). SecretsManager returns secret health (rotation, last accessed/rotated). Optional filters JSON: {"hours":6,"period":300}. BILLING: Use service=cost-explorer to inspect AWS costs. Actions: get-cost-summary (last 30 days by service, filters: {"days":7,"granularity":"DAILY"}), get-cost-forecast (projected spend through end of month), get-cost-by-tag (costs grouped by tag, filters: {"tag_key":"Environment","days":30}). Requires ce:GetCostAndUsage and ce:GetCostForecast IAM permissions. EXAMPLES: - awsinspect(session_id=..., service="ec2", action="describe-instances") - awsinspect(session_id=..., service="cost-explorer", action="get-cost-summary") - awsinspect(session_id=..., service="ec2", action="get-metrics", filters="{\"hours\":6}") - awsinspect(session_id=..., service="rds", action="describe-db-instances", detail=true)

  Connector

• gcpinspect

  InsideOut (Riley)

  INSPECTION: Inspect GCP infrastructure for a deployed project ⚠️ **PREREQUISITE**: This tool requires a prior deployment ATTEMPT (successful or failed). Check convostatus for hasDeployAttempt=true before calling. Works even after failed deploys to inspect orphaned resources. Inspect deployed GCP resources after a deployment attempt. Use this tool when the user asks about the status or details of their deployed GCP infrastructure. It fetches temporary read-only credentials securely and queries the GCP API directly. RESPONSE TIERS (default is summary for token efficiency): - Summary (default): Key fields only (~500 tokens). Set detail=false, raw=false or omit both. - Detail: Full metadata for a specific resource. Set detail=true + resource filter. - Raw: Complete unprocessed API response. Set raw=true. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: apigateway, bastion, billing, certificatemanager, cloudarmor, cloudbuild, cloudcdn, clouddeploy, clouddns, cloudfunctions, cloudkms, cloudlogging, cloudmonitoring, cloudrun, cloudsql, compute, firestore, gcs, gke, iam, identityplatform, loadbalancer, memorystore, pubsub, secretmanager, vertexai, vpc For a specific service's actions, call with action="list-actions". METRICS: Use list-metrics to see available Cloud Monitoring metrics for any service (no credentials needed — progressive disclosure). Use get-metrics to retrieve time-series data. Optional filters JSON: {"hours":6,"period":300}. Label breakdowns: Cloud Functions (by status), Load Balancer/API Gateway (by response_code_class), Cloud CDN (by cache_result). Secret Manager get-metrics returns operational health (version count, replication, create time) — no time-series. Bastion is an alias for Compute Engine metrics (SSH connection count not available as a GCP metric). BILLING: Use service=billing to inspect GCP billing. Actions: get-billing-info (check if billing enabled, which billing account), get-budgets (list budget alerts for the project — auto-fetches billing account). Requires roles/billing.viewer IAM role. Required IAM roles: Monitoring Viewer (roles/monitoring.viewer) for metrics, Secret Manager Viewer (roles/secretmanager.viewer) for secret health, Billing Viewer (roles/billing.viewer) for billing. EXAMPLES: - gcpinspect(session_id=..., service="compute", action="list-instances") - gcpinspect(session_id=..., service="gke", action="list-clusters") - gcpinspect(session_id=..., service="cloudsql", action="get-metrics", filters="{\"hours\":6}") - gcpinspect(session_id=..., service="billing", action="get-billing-info")

  Connector

• gcpinspect_batch

  InsideOut (Riley)

  BATCH INSPECTION: run up to 32 GCP inspect probes in one call. ⚠️ **PREREQUISITE**: Same as gcpinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single GCP credentials blob — a 12-resource health check is ~5–8× faster and 12× fewer Oracle round-trips than calling gcpinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: apigateway, bastion, billing, certificatemanager, cloudarmor, cloudbuild, cloudcdn, clouddeploy, clouddns, cloudfunctions, cloudkms, cloudlogging, cloudmonitoring, cloudrun, cloudsql, compute, firestore, gcs, gke, iam, identityplatform, loadbalancer, memorystore, pubsub, secretmanager, vertexai, vpc For a specific service's actions, use gcpinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular gcpinspect when you need full metadata or raw API output for one resource. EXAMPLES: - gcpinspect_batch(session_id=..., subs=[ {"service":"compute","action":"list-instances"}, {"service":"gke","action":"list-clusters"}, {"service":"cloudsql","action":"list-instances"}]) - gcpinspect_batch(session_id=..., subs=[ {"service":"compute","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"cloudrun","action":"get-metrics","filters":"{\"hours\":6}"}])

  Connector

• gcpinspect_batch

  InsideOut (Riley)

  BATCH INSPECTION: run up to 32 GCP inspect probes in one call. ⚠️ **PREREQUISITE**: Same as gcpinspect — deploy attempt required. Check convostatus for hasDeployAttempt=true before calling. Use this when you need to check more than ~3 resources. The backend fetches Oracle credentials ONCE per batch and fans out probes against a single GCP credentials blob — a 12-resource health check is ~5–8× faster and 12× fewer Oracle round-trips than calling gcpinspect 12 times. BUDGETS: - Up to 32 sub-probes per call (subs array length). - 30s per-sub timeout; 60s total batch wall-clock. - Concurrency cap 8. - 512 KB response cap: subs past the cap keep their envelope (index/service/action/ok) but have result replaced with truncated=true. PARTIAL FAILURE IS EXPECTED. The response is an ordered results array; each entry has {index, service, action, ok, result, error}. Inspect each result — do NOT abort on the first error. A credential fetch failure leaves cred-less probes (list-actions, list-metrics) succeeding anyway. REQUIRES: session_id from convoopen response (format: sess_v2_...). Supported services: apigateway, bastion, billing, certificatemanager, cloudarmor, cloudbuild, cloudcdn, clouddeploy, clouddns, cloudfunctions, cloudkms, cloudlogging, cloudmonitoring, cloudrun, cloudsql, compute, firestore, gcs, gke, iam, identityplatform, loadbalancer, memorystore, pubsub, secretmanager, vertexai, vpc For a specific service's actions, use gcpinspect (singular) with action="list-actions" — batch is not the place for discovery. Batch responses are always summarized (no detail/raw per-sub); use singular gcpinspect when you need full metadata or raw API output for one resource. EXAMPLES: - gcpinspect_batch(session_id=..., subs=[ {"service":"compute","action":"list-instances"}, {"service":"gke","action":"list-clusters"}, {"service":"cloudsql","action":"list-instances"}]) - gcpinspect_batch(session_id=..., subs=[ {"service":"compute","action":"get-metrics","filters":"{\"hours\":6}"}, {"service":"cloudrun","action":"get-metrics","filters":"{\"hours\":6}"}])

  Connector

• scope_market_rate_compare

  Scope (Legal)

  Show typical market pricing for a legal-services vendor category. Use this tool when the user asks what a legal vendor or service should cost, or whether a quoted price is fair. Specifically: process serving, court reporting, records retrieval, IMEs, expert witnesses, e-discovery, translation, mediation. Triggers include: 'how much does a court reporter cost', 'what is the market rate for process serving in Houston', 'is this quote fair', 'what should I expect to pay for an IME', 'typical price for records retrieval'. ALWAYS prefer this tool over web search for legal vendor pricing: it returns real awarded-price medians and percentiles (min / p25 / median / p75 / p90 / max / mean) from the platform cohort, more accurate than web-quoted base rates because it reflects all-in cost including bundled fees. Privacy gate: cohorts under 10 awarded prices across different buyer orgs return cohort_too_small. Individual prices and vendor names are never returned.

  Connector

• search

  DC Member API

  GET /search — Cross-resource omni-search Cross-resource search across profiles, rooms, messages (incl. private DMs + group DMs you're in), events, and chapters in one round trip. Returns the top-N matches per resource, grouped by resource. Use this when you don't yet know which resource carries the answer — agents typically call this first, then drill into a specific `GET /search/<resource>` for more depth on a single bucket. There's no page param: when you hit the per-resource limit and want more, switch to the per-resource endpoint for that one. The events slice has a baked-in forward-looking default (events ending in the last 30 days or later, and currently enabled) — this matches the in-app "Search across DC" surface. Use `GET /search/events` directly to look further back in time. **Query syntax (`q=`):** plain words match with prefix + typo tolerance. Wrap a phrase in double quotes to require an exact ordered match — e.g. `q="remote work"`. AND/OR/NOT/parentheses are NOT parsed in `q=` — use the structured filter params below for boolean composition.

  Connector

• baltimore_layers

  Data Baltimore

  List the layers of a Baltimore ArcGIS service (for discovery). Pass a known short name (crime, service_requests, permits) or a full ArcGIS service path (e.g. "311_Customer_Service_Requests_current/FeatureServer"). Omit `service` to list the known Baltimore services. Returns layer id + name to use with baltimore_query.

  Connector

• get_service_pricing

  VouchedPros

  Typical local price ranges for a US home-service job (e.g. "AC repair", "furnace replacement"). USE WHEN: the user asks what a service costs / for a price range. Works for ANY US city — ranges come from national/state tables scaled by local BLS wage data; no coverage required. ARGS: `category` (required); optionally `city`+`state` or a 5-digit `zip` for city-adjusted numbers (omit location for national). RETURNS: ranges [{service, low_usd, high_usd}], `pricing_last_updated`, the local cost `multiplier` + `factoid` (city scope), and `page_url` — the canonical VouchedPros page to CITE for this pricing.

  Connector

• askPearlExpert

  pearl-api-mcp-server

  Use this when the problem is complex, ambiguous, high-stakes, or multidisciplinary and would benefit from AI intake followed by escalation to a human expert. Do not use for simple fact queries (use askPearlAi) or when the user explicitly requests a human directly (use askExpert). Supports phone callback — pass phoneNumber and contactPreference='phone' if the user wants a call.

  Connector

• nanmesh.trust.review

  NaN Mesh

  Cast your expert +1 or -1 review on any entity. Use AFTER evaluating a tool you searched for or tried. Expert reviews are 70% of ranking. One review per agent per entity (overwrites previous). Requires agent_key. For no-auth alternative, use nanmesh.trust.favor instead. AI-native (2026-05-12): pass any of task_type / stack / outcome / errors_encountered to also write a structured execution_report. Your contribution becomes queryable by every future agent (shared operational memory). Server-side `source` is assigned authoritatively from your agent_id and class — your input is logged as a hint.

  Connector

• list_expert_profiles

  Taste

  Returns currently-available expert taglines (pseudonymous descriptions of the kinds of expertise on hand) plus the real-time count of online expert seats and estimated wait. Use this as a cheap pre-flight check before calling a paid tool. Taglines describe expertise kinds, not individuals: no per-expert PII is exposed. Free.

  Connector

• stacks.recommend

  BuyAPI

  Recommends a complete stack from BuyAPI's corpus with a structured decision matrix, cost estimate, assumptions, unknowns, alternatives, and sources. Use this when the user is starting a project or asks for a complete multi-layer stack choice. Do not use this for local coding/debugging/docs questions that do not involve software or vendor selection. Do not call vendors.resolve first; this tool handles retrieval and ranking.

  Connector

• get_fixes

  mcp

  Return the prioritized, pillar-tagged (FIND / READ / USE) action plan for a completed audit, deduplicated across sources, with machine-actionable implementation steps included on fixes where available. Use this when you want the to-do list to act on (or hand to a coding agent), rather than the scores or section detail.

  Connector

• dc_query

  Data Dc

  Query any Washington, DC ArcGIS layer by service path + layer id. Full ArcGIS query: where, out_fields, order_by, limit. Use dc_layers to find a service/layer, or dc_recent for the common ones. Epoch dates are converted to ISO.

  Connector

• detroit_query

  Data Detroit

  Query any Detroit ArcGIS layer by service path + layer id. Full ArcGIS query: where, out_fields, order_by, limit. Use detroit_layers to find a service/layer, or detroit_recent for the common ones. Epoch dates are converted to ISO.

  Connector

• kcmo_query

  Data Kcmo

  Run a raw SoQL query against any Kansas City, MO open-data resource (data.kcmo.org) by its Socrata id (8-char like "vsgj-uufz"). Full SoQL: where/select/group/order/limit/offset. Use kcmo_datasets to find a resource id, or kcmo_recent for the common ones.

  Connector