Skip to main content
Glama
811,798 tools. Updated 2026-11-20 16:27

"A resource for analyzing historical forex prices" matching MCP tools:

  • Access comprehensive historical end-of-day forex price data with the Full Historical Forex Chart API. Gain detailed insights into currency pair movements, including open, high, low, close (OHLC) prices, volume, and percentage changes.
    ConnectorNo auth
  • Get live public-transport departures with real-time delays for a stop. Sourced from GTFS-RT/HVV/VGN. Unlike the static stop list (``get_city_resource(slug, resource='transit')``), this returns minute-fresh departures including delay for ONE stop. A ``stop_id`` is required: fetch the city's transit stops first to discover valid stop IDs, then pass one here. Read-only.
    ConnectorNo auth
  • List beauty products currently discounted in a market, largest discount first. Use when the user asks for current sales, offers or discounts, optionally within a category. discount_percent is calculated from each store's own previous list price (original_price), not from historical prices. Large percentages can be one-off clearance prices; get_price_history shows the actual price trajectory for a product. Prices exclude shipping. Args: country: Market - "se" (Sweden), "no" (Norway), "dk" (Denmark), "fi" (Finland). More markets may be added over time; get_service_info returns the current list. category: Optional filter: skincare, makeup, haircare, fragrance, nails, body, accessories. min_discount: Optional minimum discount percent (e.g. 30). Applied to the fetched top deals; the returned count reflects it, total_on_sale does not. limit: Maximum number of results (1-20).
    ConnectorNo auth
  • Retrieve one complete prepared resource profile, including evidence-backed facts and primary-source provenance, by its stable resource ID.
    ConnectorNo auth
  • Get live arrivals for ANY railway station by its EVA number. Mirror of ``station_board_departures`` for arriving trains (all categories, real-time delays, disruption messages). Get the EVA from ``get_city_resource(slug, resource='stations')``. Read-only.
    ConnectorNo auth

Matching MCP Servers

Matching MCP Connectors

  • historical-baseball -- MLB history from Retrosheet game logs and the SABR Lahman Baseball Database…

  • Precomputed, source-traced historical equity study results for AI agents; not trading signals.

  • Query verified ERCOT wholesale electricity prices — ERCOT's Day-Ahead Market Settlement Point Prices ($/MWh, EMIL NP4-190-CD), the price cleared the day before each operating day at every ERCOT (Texas) settlement point, served hourly. Returns cited prices for each (`settlement_point`, `delivery_date`, `hour_ending`): the per-hour `price_usd_per_mwh` in detail records, plus `avg_price_usd_per_mwh`, `min_price_usd_per_mwh`, and `max_price_usd_per_mwh` over the result scope. Each `settlement_point` is one of ERCOT's locations — a trading Hub (e.g. `HB_NORTH`, `HB_HOUSTON` — the regional benchmark prices), a Load Zone (e.g. `LZ_HOUSTON`), a Resource Node (one generator's connection point), or a DC-tie — and `settlement_point_type` carries ERCOT's OWN verbatim classification code (`HU`/`LZ`/`RN`/`LZ_DC` and finer codes) so an agent can tell a regional benchmark from a single-plant node. Filter or group by `settlement_point`, `settlement_point_type`, `hour_ending`, or `delivery_date`; filter a date window with `delivery_date_from` / `delivery_date_to`, or one day with `delivery_date`. Pass each parameter as a top-level key of `params` (flat — not nested). Example: `{"settlement_point": "HB_NORTH", "delivery_date": "2026-06-20", "group_by": ["hour_ending"]}` for the North hub's 24 hourly day-ahead prices; `{"delivery_date": "2026-06-20", "group_by": ["settlement_point_type"]}` for the average price by location type. With no date filter the result defaults to the latest delivery day with prices (it does not scan all history); served delivery coverage begins 2014-05-02 from ERCOT's official Data Access Portal archive. Historical settlement-point names remain exactly as published, and names absent from the current pinned type list have a null type rather than being rewritten. Returns JSON with citations and optional row-level records when `include_records` is true; every value carries `source`, `as_of` (the delivery day), and a `source_row` verifiable with get_source_evidence_v1. A price is INTENSIVE ($/MWh): it is AVERAGED, min'd, and max'd over a scope — NEVER summed (a "total price" is meaningless, so no sum is offered). An average across more than one settlement point (e.g. a hub and a resource node together) is indicative, not a settlement value — group_by `settlement_point` for the per-point series, or filter to one point/type. This is the DAY-AHEAD hourly market, NOT real-time / 5-minute prices. ERCOT's day-ahead settlement-point price is a TOTAL only — there is no energy/congestion/loss component split and no loss component, and none is synthesized. ERCOT's own hour-ending label (`01:00`..`24:00`) and `dst_flag` are carried verbatim (a day is 24 hours normally, 25 on the fall-back DST date with `02:00` repeated, 23 on spring-forward). A settlement point is an electrical/aggregate location, not a plant — ERCOT supplies no county or lat/lon, so the only geography anchor is `state` = TX. This is a PRICE ($/MWh) — not capacity (MW) or generation (MWh): for installed/operating capacity use query_power_capacity_v1, for electricity generated use query_power_generation_v1. ERCOT only — prices are NEVER blended, averaged, or compared across ISOs (each ISO's market design and redistribution license differ); this tool serves ERCOT's day-ahead settlement-point prices alone.
    ConnectorNo auth
  • Get retweets of specific post. FAST (default, omit responseType or responseType="fast"): Returns up to 300 results directly (use limit param to reduce, e.g. limit=5). Database-only. Results include guidance for full mode. PAGING (responseType="paging"): Async paginated results (100/page), returns operationId for polling via checkOperationStatus. Supports pageNumber/tableName for subsequent pages. Database-only search for historical retweet data. Date filter: OMIT startDate by default. ONLY pass if user explicitly requests filtering from specific date (YYYY-MM-DD format). IMPORTANT!!!!!: THE CURRENT YEAR IS 2026. When user requests relative dates (last week, last month), verify the current date from your system context and double-check the calculated dates - models often get the year wrong, searching one year earlier than intended. Use to analyze post amplification patterns. NOT for quotes - use getTwitterPostQuotes. Optional fields parameter for performance: ["id", "authorUsername", "createdAt"]. This is a safe, read-only tool for analyzing searchable information.
    ConnectorOAuth
  • Get USER PROFILES of people who interacted with an Instagram post. Returns full user data (bio, followerCount, followingCount, etc.). RETURNS USER PROFILES: id, username, fullName, biography, followerCount, followingCount, isVerified, profilePicUrl. Use for analyzing WHO engaged with a post. NOT FOR COMMENT TEXT: To read the actual comment content (what people wrote), use getInstagramCommentsByPostId instead. INTERACTION TYPES: "commenters" (users who commented), "likers" (users who liked). WHEN TO USE THIS TOOL: Analyzing commenters/likers demographics, finding influencers who engaged, building audience profiles, network analysis of who interacts with posts. WHEN TO USE getInstagramCommentsByPostId: Reading comment text, sentiment analysis of what was said, analyzing discussion content. FAST (default, omit responseType or responseType="fast"): Returns up to 300 results directly (use limit param to reduce, e.g. limit=5). Auto API fallback for commenters when stale. PAGING (responseType="paging"): Async paginated results (1000 users per page with default fields), returns operationId - IMMEDIATELY call checkOperationStatus to get results. CSV export included via dataDumpExportOperationId. Supports pageNumber/tableName for subsequent pages. Optional fields (default: ["id", "username", "fullName"]). Available: biography, isPrivate, isVerified, followerCount, followingCount, mediaCount, profilePicUrl. This is a safe, read-only tool for analyzing searchable information.
    ConnectorOAuth
  • Check the status of a submitted job. Call this after submit_query to see if your job is ready. Status progression: submitted -> analyzing -> fetching -> clustering -> enriching -> completed/failed IMPORTANT: Jobs take several minutes to process. First check after ~1-2 minutes, then poll every 30-60 seconds. Broad searches can take 10-30+ minutes; for long jobs, poll every 60-120 seconds. Do NOT call this tool in a tight loop. Stop polling when status is `completed` or `failed`. Treat `submitted`, `analyzing`, `fetching`, `clustering`, and `enriching` as active states and continue polling. You don't need to wait for completion to pull results. Partial results are available during `enriching` — call pull_results after ~2 minutes, then poll status every 30-60 seconds and pull again for fresher results. Do not stop pulling just because an intermediate pull is empty/unchanged. Use `progress_validated` vs `candidate_records` to track whether more results may still appear (`progress_validated < candidate_records`). If transport/session fails, resume using the same `job_id`.
    ConnectorNo auth
  • Returns the real-time exchange rate quote for a forex pair. Common pairs: EURUSD, GBPUSD, USDJPY, USDCHF, AUDUSD, USDCAD. yearHigh / yearLow are the feed's trailing-year range, roughly the past 12-13 months: call them trailing-year figures. For a year-to-date or calendar-year change, a dated extreme or an exact 52-week figure use get_forex_historical, since the quote does not date its extremes. A pair quotes the BASE currency (first three letters) in units of the QUOTE currency (last three): USDHUF 320 means 1 USD = 320 HUF. A rising rate, or a rate above its priceAvg50 / priceAvg200, is the base strengthening against the quote. changePercentage is measured against previousClose as of the quote's timestamp. Spot FX is closed from Friday 17:00 to Sunday 17:00 New York time; a quote stamped in that window shows the change as of the last close, not a move made that day. Args: symbol: Forex pair symbol (e.g. 'EURUSD')
    ConnectorNo auth
  • Real-time forex quotes: the most-traded pairs, each with a display name. The feed carries 1,550 pairs in alphabetical order, which is far more than one response can hold — so this returns the most prominent `limit` of them (majors first, then by volume), and the response states how many were left out. Pass `symbols` for specific pairs, or call get_forex_quote for a single one. Read `note` before summarising: it says how many pairs the slice covers out of how many exist, so a "top pairs" answer is not mistaken for the whole market. `volume` on a forex row is a per-venue tick count, not market turnover — FX is over-the-counter and most pairs report 0. It does not rank the market. Args: symbols: Comma-separated pairs (optional; overrides the ranked slice) limit: How many ranked pairs to return (optional)
    ConnectorNo auth
  • Get one page of decoded transaction history for an EVM wallet across DeBank-supported chains. Returns send, receive, and approval categories with protocol, token, exchange, gas, and USD metadata. Use the returned next_cursor as start_time to page backward. Use when: Use for wallet activity discovery, protocol interaction history, exchange exposure, and gas analysis. Page backward with next_cursor for older activity. Use get_transaction or decode_transaction when one known transaction needs block-level details. Limitations: DeBank returns at most 20 entries per call and the data may be stale. This tool is not a complete ledger, PnL engine, or cost-basis calculator because historical execution prices and all transfer semantics are not guaranteed. Alternatives: get_transaction, decode_transaction
    ConnectorNo auth
  • Read the existing fuel-price provenance/status, not current pump prices or a vehicle's consumption. No arguments. Currently succeeds with SOURCE_REQUIRED_AT_RUNTIME and prices=[] because no validated current-price adapter is configured. Use get_source_context for an exact source ID or search_vehicle_knowledge for broader fuel knowledge. Never treat empty prices as zero or invent a current price. Public read-only access; no knowledge writes. Calls consume rate limits.
    ConnectorNo auth
  • Prices. kind='gas' (chain): EIP-1559 gas recommendations (slow/standard/fast) computed from our pool on an EVM chain, 1 weighted unit. kind='token' (symbols, comma-separated e.g. 'ETH,USDC'): current token prices in USD. Use it before sending a transaction (gas) or to value a balance (token). Not for what a FlexYield call costs in units (use get_quote) and not for plan prices (use list_plans). Returns JSON: gas → chain, base_fee_per_gas, recommendations, computed_from, computed_at, unit_weight; token → prices, quote, source, checked_at. Read-only. Needs your API key.
    ConnectorNo auth
  • Total swap/rollover cost (or credit) for holding a forex position overnight, converted to a given account currency via a live FX rate (same TrueFX/frankfurter.app source as the other forex _live tools). swapPerLotPerNight is still always a manual input: swap rates are broker-set, with no free live feed available for them. Precious-metal pairs (XAU, XAG, XPT, XPD) are refused with an error, because their pip and lot size differ by broker. Edge cases: same input rules as workflow.run_forex_swap_cost (nights a whole number, swap any sign); when no rate is found for the account currency, available is false and no figure is returned. Not covered: the triple swap on Wednesday and swap rates that change during the hold. Use when user asks "how much will holding this position overnight cost me in my account currency?" and it differs from the pair's own quote currency. Returns everything workflow.run_forex_swap_cost does, plus accountCurrency, totalSwapAccount, fxRate, fxSource, available (false + error if no rate could be found). If available is false, do not use any result field (computed figures and any verdict are null or empty), so read available first.
    ConnectorNo auth
  • Prices. kind='gas' (chain): EIP-1559 gas recommendations (slow/standard/fast) computed from our pool on an EVM chain, 1 weighted unit. kind='token' (symbols, comma-separated e.g. 'ETH,USDC'): current token prices in USD. Use it before sending a transaction (gas) or to value a balance (token). Not for what a FlexYield call costs in units (use get_quote) and not for plan prices (use list_plans). Returns JSON: gas → chain, base_fee_per_gas, recommendations, computed_from, computed_at, unit_weight; token → prices, quote, source, checked_at. Read-only. Needs your API key.
    ConnectorNo auth
  • Get one page of decoded transaction history for an EVM wallet across DeBank-supported chains. Returns send, receive, and approval categories with protocol, token, exchange, gas, and USD metadata. Use the returned next_cursor as start_time to page backward. Use when: Use for wallet activity discovery, protocol interaction history, exchange exposure, and gas analysis. Page backward with next_cursor for older activity. Use get_transaction or decode_transaction when one known transaction needs block-level details. Limitations: DeBank returns at most 20 entries per call and the data may be stale. This tool is not a complete ledger, PnL engine, or cost-basis calculator because historical execution prices and all transfer semantics are not guaranteed. Alternatives: get_transaction, decode_transaction
    ConnectorNo auth
  • Authoritative REST API reference for writing integration code into the user's app. Base URL: https://api.volanea.com — auth is `Authorization: Bearer <secret key>`; sends accept an `Idempotency-Key` header. Use this instead of guessing endpoint shapes or SDK names. THREE MODES, and the default is the expensive one: `{ resource, indexOnly: true }` lists every operation's id, method, path, and one-line summary with NO schemas (a few KB); `{ resource, operations: [ids] }` returns full request/response schemas for just those operations, plus only the schemas they reference; `{ resource }` alone returns the entire resource, which for Campaigns or Contacts is 40-50 KB of one reply. Start with indexOnly, then expand the two or three operations you are actually going to call — every byte of a reference dump re-enters your context on every later turn.
    ConnectorNo auth
  • Authoritative REST API reference for writing integration code into the user's app. Base URL: https://api.volanea.com — auth is `Authorization: Bearer <secret key>`; sends accept an `Idempotency-Key` header. Use this instead of guessing endpoint shapes or SDK names. THREE MODES, and the default is the expensive one: `{ resource, indexOnly: true }` lists every operation's id, method, path, and one-line summary with NO schemas (a few KB); `{ resource, operations: [ids] }` returns full request/response schemas for just those operations, plus only the schemas they reference; `{ resource }` alone returns the entire resource, which for Campaigns or Contacts is 40-50 KB of one reply. Start with indexOnly, then expand the two or three operations you are actually going to call — every byte of a reference dump re-enters your context on every later turn.
    ConnectorNo auth
  • Lists every entity of one Star Wars resource type as a JSON array (Episodes I-VI data). Responses are large (all 82 PEOPLE, about 38 KB); to find a single entity, prefer sw_search, then sw_get; for a compact index pass fields, e.g. ["name"] (about 5 KB).
    ConnectorNo auth