"A tool or method for editing code using diffs" matching MCP servers:

An oil & gas data-analytics MCP server that enables guarded SQL queries, well valuation, and map rendering within chat apps.

Provides real-time South African load shedding data through the EskomSePush API. Enables users to check current load shedding stages, monitor API usage, and access area-specific schedules and searches with natural language queries.

Exposes a single read-only tool that retrieves live Huawei SUN2000 inverter telemetry over local Modbus TCP, including model, firmware, active power, daily and lifetime yield, device status, and observation timing. Readings are briefly cached, with failures returned as errors rather than stale or fabricated values.

Enables MCP clients to pull US ZIP-code-level electricity data — Scope 2 location- and market-based emission factors, Scope 1 fuel factors, hourly grid carbon intensity, plant-level emissions, retail rates, and utility tariffs — for carbon accounting, multi-site comparison, and finding the cleanest hours to run flexible loads. It requires no API key or signup and works as either a hosted remote endpoint or a local stdio process.

Enables users to ask directly within a Claude Code or Codex chat how much energy and CO2eq their current session or entire project has consumed, estimated locally from session logs with no telemetry or network calls. It also reports everyday-activity equivalents such as kettle boils or washing machine cycles for the resulting figures.

MCP server providing deterministic, standards-traceable engineering calculations for combined-cycle power plant balance-of-plant design, such as fluid properties, pipe sizing, pump NPSH, and valve sizing, with every result including method, assumptions, and warnings.

Enables users with a scheduling code to see real inspection times and book visits, while connected customers in the US and Europe can view sites and production and preview, approve, book, move, or cancel visits.

Enables classifying electricity meter days as active, standby, off, or unsure from 96 fifteen-minute kWh readings plus a meter reference, with batch support for up to 31 days and model metadata. Runs fully offline as a frozen scikit-learn classifier, exposing single-day and batch classification plus model-info tools over STDIO or HTTP.

A local MCP server that enables building energy analysis through tools for anomaly detection, flexible-load schedule optimization, and battery/solar outage-autonomy simulation using reproducible synthetic data.

This MCP server provides a single read-only tool to query official CPFL (electric utility) bill download data via a hosted, prepaid service without requiring platform credentials.

PyPSA MCP is a Model Context Protocol (MCP) server for creating, analyzing, and optimizing energy system models using PyPSA (Python for Power System Analysis).

Provides real-time grid carbon intensity, power generation breakdown, and carbon-intensity forecasts for any zone or lat/lon location.

An MCP server that exposes Home Assistant's REST and WebSocket APIs as 182 tools, enabling clients like Claude Code to control lights, climate, media, automations, and more. It also provides a status dashboard and supports running as a Home Assistant app or container.

Read-only MCP server for querying Enel Rio de Janeiro's official list of installations using a single tool, hosted with prepaid pay-per-use pricing.

Enables access to real-time electricity data for a 15-state US region plus Manitoba: fuel mix, five-minute wholesale prices, binding transmission constraints, load and forecasts, and wind/solar output. Can run as a remote MCP endpoint or a local stdio server with no authentication.

A TypeScript-based Model Context Protocol (MCP) server with web interface for calculating CO2 emissions using the Climatiq API.

MCP server that estimates photovoltaic production using the European Commission's PVGIS API, deployed on Cloudflare Workers for serverless, free-tier operation.

Exposes Frank Energie energy data (electricity and gas prices, account info) as MCP tools for LLMs, using python-frank-energie for API communication.

Enables users to consult and download second copies (2ª via) of Comgás gas bills from the official source via a read-only tool, with prepaid per-query credit.

Read-only MCP server for consulting CPFL utility data via official source using link and OCR, with prepaid per-query pricing.

WattScope helps teams see the carbon cost of the AI they are already using. Ask Claude to record a piece of work and it attributes the estimated footprint to your organization and to a project, then reports it back — per session, per project, or organization-wide. Every figure is an estimate, and carries the strength of the evidence behind it.

MCP server for consulting and downloading Light utility bills using CEP and OCR from official sources. Offers a single read-only tool with pre-paid pricing, hosted on api.mcp.ai.

Enables querying PVGIS solar radiation and typical meteorological year data through natural language questions, using tools for monthly irradiation averages and hourly synthetic climate data.

Provides tools to search, inspect, and query energy open data from ODRE (electricity & gas production, consumption, grid load, renewables) using natural language or direct tool calls.

Enables calculation of the most economical fuel (gasoline, ethanol, or natural gas) based on prices and vehicle consumption, following the 70% rule for ethanol and 60% for GNV.

MCP server for querying and simulating the dispatch plan of a solar PV + battery system in the Chilean electricity market, using deterministic optimization and optional DRL.

Generates peer comparison reports on emissions trends, reduction targets, and gaps for companies in a given SICS sector/sub-sector using live data from the Climate Data Utility (CDU).

Hourly electricity grid carbon intensity (gCO2eq/kWh) for 45 zones across Europe, the US and Great Britain, computed from ENTSO-E, EIA and NESO generation data. Four read-only tools; every value carries its interval timestamp and how stale it is. No API key, no account.

An unofficial read-only MCP server for Panasonic AiSEG2 home energy management controllers, enabling clients to read live power flow, per-circuit consumption, circuit names, daily totals, and historical energy/cost data from the device's local web interface.

Carbon-aware MCP scheduler that defers "do it later" / "by tomorrow" / "overnight" LLM tasks to the cleanest electricity-grid hour inside a deadline — 40-70% lower CO2 per task, 50% cheaper via Anthropic/OpenAI Batch APIs. 9 MCP tools, per-task carbon receipts to local SQLite, Apache-2.0.

Consulta el comparador oficial de ofertas de luz y gas de la CNMC (España) y devuelve las ofertas ordenadas por precio, con un análisis a varios años. Funciona con el QR de la factura o con código postal y consumo anual.

Estimates the environmental footprint (carbon, resources, primary energy) of cloud instances, servers, GPUs and other components, and end-user devices using BoaviztAPI. Returns embedded and use-phase impacts with units, uncertainty ranges and caveats.

Unofficial MCP server for the messdienst24.de utility portal, providing tools to retrieve heating and hot-water consumption data, download PDF reports, and compare usage trends.

An MCP server that lets an MCP client control IKEA TRÅDFRI smart plugs paired to a DIRIGERA hub via its local REST API.

Read-only MCP server for Home Assistant that computes statistical summaries, trends, and session detection from recorded sensor history, returning compact tables instead of raw data so small local models can answer questions about energy usage, climate, and appliance activity without token-heavy arithmetic.

Enables MCP clients to search Colombian energy and gas resolutions and legal opinions, read them in chunks or by internal search, and explore each rule's regulatory graph with validity computed from the texts themselves.

Read-only access to EDF Suivi Conso, letting an agent query daily and monthly electricity (Linky) and gas (Gazpar) consumption in kWh and euros, 30-minute load curves, daily peak power, contracts, weather and year-over-year or period comparisons. Nothing can be changed: every tool reads, and authentication is handled through an EDF login that keeps a stored refresh token.

An MCP server for US electricity demand and weather data that provides tools, resources, and prompts to query hourly demand, daily demand, peak demand, and demand vs temperature across regions, all running locally with a bundled SQLite database.

A Model Context Protocol server that connects Claude to your own Kia vehicle through the Kia Owners API, enabling vehicle status, location, odometer, EV charge state, and confirm-gated commands for doors, climate, and charging.

Enables AI assistants to control a Homey Pro smart home hub, create automation flows from natural language, and query device and energy history.