interface_config.py•2.97 kB
"""
思科设备接口配置模板
支持配置接口IP、状态、带宽、描述等操作
"""
def configure_interface_ip(interface: str, ip_address: str, subnet_mask: str) -> str:
"""
配置接口IP地址
Args:
interface: 接口名称，如 GigabitEthernet0/1
ip_address: IP地址
subnet_mask: 子网掩码
Returns:
配置命令字符串
"""
commands = [
"configure terminal",
f"interface {interface}",
f"ip address {ip_address} {subnet_mask}",
"no shutdown",
"exit",
"end"
]
return "\n".join(commands)
def configure_interface_state(interface: str, state: str = "up") -> str:
"""
配置接口状态
Args:
interface: 接口名称，如 GigabitEthernet0/1
state: 接口状态，up或down
Returns:
配置命令字符串
"""
commands = [
"configure terminal",
f"interface {interface}"
]
if state.lower() == "up":
commands.append("no shutdown")
elif state.lower() == "down":
commands.append("shutdown")
commands.append("exit")
commands.append("end")
return "\n".join(commands)
def configure_interface_description(interface: str, description: str) -> str:
"""
配置接口描述
Args:
interface: 接口名称，如 GigabitEthernet0/1
description: 接口描述
Returns:
配置命令字符串
"""
commands = [
"configure terminal",
f"interface {interface}",
f"description {description}",
"exit",
"end"
]
return "\n".join(commands)
def configure_interface_bandwidth(interface: str, bandwidth: str) -> str:
"""
配置接口带宽
Args:
interface: 接口名称，如 GigabitEthernet0/1
bandwidth: 带宽，单位kbps
Returns:
配置命令字符串
"""
commands = [
"configure terminal",
f"interface {interface}",
f"bandwidth {bandwidth}",
"exit",
"end"
]
return "\n".join(commands)
def show_interface(interface: str = None) -> str:
"""
显示接口信息
Args:
interface: 接口名称，如GigabitEthernet0/1，为None时显示所有接口
Returns:
显示命令字符串
"""
if interface:
return f"show interface {interface}"
else:
return "show interface"
def show_ip_interface(interface: str = None) -> str:
"""
显示接口IP信息
Args:
interface: 接口名称，如GigabitEthernet0/1，为None时显示所有接口
Returns:
显示命令字符串
"""
if interface:
return f"show ip interface {interface}"
else:
return "show ip interface brief"